Faymonville Ilo Polpriklopniki nakup rabljenega (202)

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2012, Faymonville STBZ-4VA Baujahr: 2012 10-t-SAF-Achsen Eigengewicht: 22.500 kg Nutzlast: 57.500 kg Gesamtgewicht: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulikanschluss am Auflieger, kompatibel mit NATO-Elektrik Hydraulisch abnehmbarer Schwanenhals 5 Meter ausziehbar 2 x Reserverad Feuerverzinkt! Luftfederung Baggerbrücke: 5600 x 950 mm Kabelgebundene Fernbedienung Abmessungen: Schwanenhals: L: 4500 mm B: 2550 mm H: 1750 mm Sattelhöhe: 1250 mm Ladefläche: L: 7550 mm B: 2750 mm H: 530 mm Dodsyfn Huspfx Adqjur Bodenstärke: 350 mm Heck Auflieger: L: 5600 mm B: 2750 mm H: 1000 mm Bereifung: 235/75R17,5, 70% Dolly D-2 Baujahr: 2012 10-t-SAF-Achsen Eigengewicht: 4.300 kg Gesamtgewicht: 38.000 kg Sattellast: 18.000 kg Luftfederung Bereifung: 235/75R17,5, 70% Deutscher Auflieger! ID NR: 588 Es gelten die Allgemeinen Geschäftsbedingungen (AGB) der Firma Heinhuis für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für sämtliche von Heinhuis geschlossenen Verträge sowie für alle diesen vorausgehenden Verhandlungen. Mit jeder Form der Reaktion erkennen Sie die Gültigkeit der AGB der Firma Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: modra, Leto izdelave: 2016, Faymonville F-S43-1ABA. Baujahr: 2016. 10 t SAF-Achsen. Leergewicht: 12.600 kg. Zuladung: 29.400 kg. Zulässiges Gesamtgewicht: 42.000 kg. Sattellast: 18.000 kg. Hydraulik kompatibel mit NATO-Anschlüssen. Alubordwände am Schwanenhals. Seilwinde mit Fernbedienung. Hydraulisch absenkbare Brücke vom Boden bis zum Schwanenhals (Länge: 3.000 mm). Luftfederung. Geriffelter Boden. Lenkachse – 3 gelenkte Achsen mit Servolenkung. Zweipunkt-Hydraulikstützen am Heck. Zweifach hydraulische Auffahrrampen: - Länge: 2.850 + 1.750 mm - hydraulisch von links nach rechts verstellbar. Abmessungen: Schwanenhals: L: 3.750 mm B: 2.500 mm H: 1.350 mm Sattelhöhe: 1.150 mm Ladefläche: L: 9.600 mm B: 2.500 mm H: 900 mm Bereifung: 235/75R17,5, Profil ca. 80 % Deutscher Auflieger! ID-Nr.: 437 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Kostenvoranschläge der Firma Heinhuis, alle von Heinhuis geschlossenen Verträge sowie die diesen vorausgehenden Verhandlungen. Mit jeglicher Art der Kontaktaufnahme erkennen Sie die Gültigkeit dieser Allgemeinen Geschäftsbedingungen an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise. Duodjyfn Ekjpfx Adqsr = Weitere Informationen = Baujahr: 2016 Leergewicht: 12.600 kg Zuladung: 29.400 kg zulässiges Gesamtgewicht: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism • Cargo platform with approx. 30 mm thick timber flooring • 7 pairs of external folding lashing rings (LC 5,000 daN) • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer Dedsiu Etrepfx Adqsur • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall Dujdpfsuqlmnsx Adqjr - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function Dusdovy Edcepfx Adqer - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles Dusdst Ag Uwepfx Adqjr - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm Djdpjk Af Svjfx Adqsur - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Dsdsmfqi Iepfx Adqjur Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Duodsunrapopfx Adqsr Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, največja dovoljena obremenitev: 36.755 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2025, naslednji pregled (TÜV): 06/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the specifications. Complete equipment details available upon request. Load Platform: * Extendable load platform with pneumatically operated locking mechanism Duedpfsya Shlsx Adqer * Load platform with approx. 30 mm thick wooden floor enclosed in omega profiles * 10 pairs of foldable lashing rings (LC 2,500 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Loading width approx. 2,480 mm Landing Legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), lift/lower function (ET 120) * Self-steering trailing axle, with electro-magnetic reverse lock actuated via reverse gear or manually * Axle tools Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system according to EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * Premium, durable corrosion protection on the standard shot-blasted welded frame ensured by 2-component (2K) zinc-dust primer * High-quality 2-component (2K) topcoat, single-color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on the galvanized front connection bar * 2-inch king pin * Yellow reflective tape as per EU regulations on sides, extension, and rear of the trailer * European reflective boards (red-yellow) on the rear of the trailer * Load platform with approx. 30 mm thick wooden floor in omega profiles * Storage compartment for approx. 1,000 mm long stanchions in rear central beam * 1 spare wheel holder under the load platform on the left side (in direction of travel) * Bracket for rotating beacon on rear of trailer * On gooseneck and rear end plate, left and right, one bracket each for warning signs incl. socket * Load gauge for axle load determination incl. load chart * Galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high * Foldable aluminium drop sides with rear wing doors (anodized), side height approx. 600 mm, with KINNEGRIP foldable stanchions * Holder for aluminium drop sides, under load platform ahead of axles * Holder for KINNEGRIP stanchions, under load platform behind axles * 10 pairs of sockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the load platform * Impact protection right and left on rear cross member * 6 pairs of WADER container pockets in the load platform, for 1x 20' container, 2x 20' containers, or 1x 40' container * One INOX toolbox, approx. 600 x 350 x 600 mm, under the load platform on the left (in direction of travel) * 4 pairs of longitudinal stanchion socket rails on the load bed, for plug-in stanchions 100 x 50 mm * Lift axle on front axle with TEBS E control depending on current axle load and loading condition * Bracket for rotating beacon on warning panels * Acoustic reverse warning signal * 2 LED reversing lights mounted on the rear end plate * HRM metallization (High Resistance Metallisation) of the outer frame

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our full inventory of immediately and short-notice available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm - Gooseneck hydraulically lift/lower and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adjusting to bed length - 5 pairs of lashing rings, outward folding (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for screw-mounted RUD rings Rear undercarriage: - Rear chassis with closed outer frame, checker plate surface, continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, outward folding (LC 10,000 daN) - 1 pair of flat lashing rings in the recess LC 16,000 daN - 1 pair of flat lashing rings in the recess LC 10,600 daN Duodpfx Asxbmn Ujdqsr - 2 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced steering - Burst protection valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for secure positioning when raised - Final painting of axles with 2 coats of 2-component paint, single color in FAY grey 34-0260 - Technical axle load: 12,000 kg each, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion, load index (146/146F) TPMS: - TPMS tire pressure monitoring system according to ECE R 141 Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, 24V ASPÖCK-NORDIK (ASS3) lighting - All LED side marker lights flash with indicator - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: - Complete steel structure automatically shot-blasted with a blast wheel system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire chassis using ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL system 841GL Including the following additional features: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Rear and front axle steering via cable remote control with push buttons and single track control of axles (without installation in tractor unit) - Electro-hydraulic unit - 2 pairs of bolted container locks on the outer beams. Including 2 pairs of container fastenings for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminum side boards and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stakes are removable

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2011, Faymonville STBZ-4VA Baujahr: 2011 10-t-SAF-Achsen Eigengewicht: 22.500 kg Nutzlast: 57.500 kg Gesamtgewicht: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik des Aufliegers funktioniert mit NATO-Elektrik Hydraulisch abnehmbarer Schwanenhals 5 m ausziehbar 2 x Reserverad Verzinkt! Luftfederung Baggerbrücke: 5.600 x 950 mm Fernbedienung mit Kabel Abmessungen: Schwanenhals: L: 4.500 mm B: 2.550 mm H: 1.750 mm Sattelhöhe: 1.250 mm Ladefläche: L: 7.550 mm B: 2.750 mm H: 530 mm Bodenstärke: 350 mm Heck: L: 5.600 mm B: 2.750 mm H: 1.000 mm Bereifung: 235/75R17,5, 70 % Mit Dolly D-2 Baujahr: 2012 10-t-SAF-Achsen Eigengewicht: 4.300 kg Gesamtgewicht: 38.000 kg Sattellast: 18.000 kg Luftfederung Bereifung: 235/75R17,5, 70 % Deutscher Trailer! ID-Nr.: 624 Dodpfx Adeydvv Ueqeur Es gelten die Allgemeinen Geschäftsbedingungen der Heinhuis B.V. für alle Inserate, Angebote, Kostenvoranschläge, Verträge und vorausgegangene Verhandlungen. Mit jeder Art der Reaktion akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen und bestätigen deren Kenntnisnahme. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2011 Leergewicht: 22.500 kg Zuladung: 57.500 kg zulässiges Gesamtgewicht: 80.000 kg ausziehbarer Aufbau: Ja Preis: auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: zelen, Leto izdelave: 2015, Faymonville F-S44-1ACA Baujahr: 2015 10-Tonnen-SAF-Achsen Leergewicht: 22.250 kg Nutzlast: 57.750 kg Zulässiges Gesamtgewicht: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik arbeitet über NATO-Anschluss vom Zugfahrzeug Alu-Bordwände am Schwanenhals Dujdpfx Aoydlfredqer Hydraulisch abnehmbarer Schwanenhals Luftfederung 5 Meter ausziehbar Funkfernsteuerung Baggerbrücke: 5.600 mm x 950 mm Bereifung: 235/75R17,5 80 % Profil Abmessungen: Schwanenhals: L: 4.900 mm B: 2.500 mm H: 1.800 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodendicke: 300 mm Heck des Aufliegers: L: 5.600 mm B: 2.750 mm H: 1.050 mm Dolly D-2 Baujahr: 2015 10-Tonnen-SAF-Achsen Eigengewicht: 3.650 kg Zulässiges Gesamtgewicht: 36.100 kg Sattellast: 16.100 kg Luftfederung Bereifung: 235/75R17,5 70 % Profil Deutscher Auflieger! 4 Stück verfügbar! ID NR: 484 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis sowie für alle von Heinhuis abgeschlossenen Verträge und die ihnen vorausgehenden Verhandlungen. Durch jegliche Form der Kontaktaufnahme akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2018, Faymonville F-S42-2GXX. Dodoydi Uqopfx Adqsur Baujahr: 2018. 12 t Pendel-X-Achsen. Max. Gesamtgewicht: 49.000 kg. Sattelzapfenlast: 25.000 kg. 5,5 Meter ausziehbar. 2 x 25 cm verbreitert inkl. Verbreiterung. Verzinkt. Hydraulisch abfahrbares Schwanenhals. Alu-Bordwände am Schwanenhals. Hydraulische Federung. Funk-Fernbedienung. Baggerbrücke: 3050 mm x 700 mm. 3 herausnehmbare Bodenplatten. Hydraulik arbeitet vom Auflieger über NATO-Elektrik. Abmessungen: Schwanenhals: L: 3.700 mm B: 2.500 mm H: 1.500 mm Sattelhöhe: 1.250 mm Ladefläche: L: 6.850 mm B: 2.550 mm H: 400 mm Bodenstärke: 230 mm Heck des Aufliegers: L: 3.050 mm B: 2.550 mm H: 950 mm Bereifung: 245/70R17,5 60% ID-Nr.: 494. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis, sämtliche von Heinhuis abgeschlossenen Verträge und die den Vertragsabschlüssen vorangegangenen Verhandlungen. Durch jegliche Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, von diesen Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2018 Max. Gesamtgewicht: 49.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: modra, Leto izdelave: 2022, Faymonville Maxtrailer F-S42-2GXX. Baujahr: 2022. 12 t Pendel-X Achsen. Eigengewicht: 12.917 kg. Nutzlast: 34.083 kg. Zulässiges Gesamtgewicht: 47.000 kg. Sattellast: 23.000 kg. Hydraulisch abfahrbares Schwanenhals. Aluminium Bordwände + Werkzeugkasten am Schwanenhals. Reserverad. Hydraulikanschluss am Lkw (NATO). 5,5 m ausziehbar. 2 x 25 cm verbreiterbar. Funkfernbedienung. Hydropneumatische Federung. Baggerbrücke 2600x700 mm. Verzinkt. Abmessungen: Schwanenhals: L: 3700 mm B: 2450 mm H: 1450 mm Sattelhöhe: 1150 mm Ladefläche: Duodeyc Uiqjpfx Adqsr L: 6850 mm B: 2550 mm H: 350 mm Bodenstärke: 200 mm Heck Trailer: L: 2600 mm B: 2550 mm H: 1000 mm Bereifung: 245/70R17,5, Profil 90% Zustand: Wie neu! ID-Nr.: 509 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis finden auf alle Anzeigen, Angebote und Offerten von Heinhuis, auf sämtliche von Heinhuis geschlossenen Verträge sowie auf den ihnen vorausgehenden Verhandlungen Anwendung. Durch jegliche Form der Reaktion erkennen Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen von Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettoexportpreise. = Weitere Informationen = Baujahr: 2022 Leergewicht: 12.917 kg Zuladung: 34.083 kg Zulässiges Gesamtgewicht: 47.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rumena, Leto izdelave: 2013, Faymonville STZ-3UB Year of manufacture: 2013 8-12 ton SAF axles Unladen weight: 13,400 kg Load capacity: 47,600 kg Gross vehicle weight: 61,000 kg Kingpin load: 25,000 kg Power steering with 3 steering axles Hydraulic system compatible with NATO standards EBS, ABS, ALB Hydraulic bridge from deck to gooseneck Bridge length: 3,000 mm Air suspension 2-point hydraulic outriggers at the rear 2-way hydraulic ramps: - Length: 2,800 + 1,700 mm - Hydraulic adjustment from left to right Winch Dimensions: Gooseneck: Length: 3,700 mm Width: 2,500 mm Height: 1,450 mm Kingpin height: 1,250 mm Deck: Length: 9,200 mm Width: 2,550 mm Height: 900 mm Tyres: 245/70 R17.5, 70% tread Dusdpfsycuq Uex Adqor ID No.: 668 The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, to all agreements entered into by Heinhuis, and to the negotiations preceding them. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year: 2013 Unladen weight: 13,400 kg Load capacity: 47,600 kg Gross vehicle weight: 61,000 kg Price: On request = Company information = For more information: WhatsApp:

Stanje: rabljeno, največja dovoljena obremenitev: 39.780 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Full equipment list available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with chequer plate flooring Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyres 205/65 R 17.5 twin-mounted Axles: * BPW axles, two rigid axles, two steering trailing axles, air suspension, drum brake with raise/lower function * Steering trailing axles equipped with electro-magnetic reverse lock, activated by reverse gear or manually Dsdpfxex Uvlro Adqjur Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connections to the tractor unit Steel Construction: * Steel construction made of high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, provided by a two-component zinc-rich primer * High-quality, single-color two-component top coat in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Wheels in silver Electrical System: * Electrical system in accordance with EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Included Accessories: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Provision at rear of gooseneck for ALU loading ramps * Galvanized folding supports under the sloped section of the platform * Holder for a warning beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mountings for warning boards left and right on the gooseneck and rear panel, including power socket * One mudflap at the rear of the trailer * Manual and description on USB stick * European reflective signs (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Acoustic reverse warning signal * Load gauge for determining axle loads, including load diagram

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. Dodjwta Aljpfx Adqour WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2016, vzmetenje: zrak, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, Vzmetenje: zračno vzmetenje Zadnja os 1: krmiljena Zadnja os 2: krmiljena Zadnja os 3: krmiljena Največja dovoljena masa: 48.000 kg Tehnično stanje: zelo dobro Dsdpfxjvvwzre Adqeur Vizualno stanje: zelo dobro Cena: na zahtevo Za več informacij se obrnite na Davida F Middelmana.

Stanje: rabljeno, največja dovoljena obremenitev: 40.800 kg, skupna masa: 53.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Faymonville 4-osovinski Multimax STN-4AX niskopodni teleskopski poluprikolica Godina proizvodnje: 11.2012 Tara: 13.000 kg Dozvoljena ukupna masa: 53.800 kg Tehnički dozvoljena masa: 55.400 kg Nosivost: 40.800 kg Podpritisna sila: 25.000 kg Dimenzije guma: 205.65R17,5 3. i 4. osovina – prinudno upravljane Dedpfx Adsu Aynlsqour 4x SAF osovine 7.600 kg sa vazdušnim ogibljenjem Dužina: 13.475 mm do 20.275 mm (izvlačiva) Širina: 2540 mm do 2620 mm Visina: 1200 mm ! Dodatne informacije na zahtev putem e-maila ! Podaci su informativni i bez garancije na tačnost! Informacije dostupne na internetu su neobavezujući opisi i ne predstavljaju zagarantovane karakteristike. Prodavac ne odgovara za greške, tipografske greške ili greške u prenosu podataka. Zadržavamo pravo na izmene. Stalan otkup i prodaja, kao i zamena i iznajmljivanje dizalica i podiznih vozila, kao i građevinskih i teških vozila.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Dedpfxox Upxxe Adqeur Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os Dodpfx Adox I Uyhsqeur * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Stanje: novo, največja dovoljena obremenitev: 37.150 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment. Full equipment details upon request. Gooseneck: * Gooseneck with front bevels approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood decking approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings fitted flat at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for hooking in tie-down straps (LC 2,000 daN) * Hardwood decking approx. 48 mm thick, over the axles with chequer plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF TPMS: * TPMS tyre pressure monitoring system compliant with ECE R 141 * Data transmission to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Duodpfx Aox H Hi Eedqer Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated by reverse gear and manually * Air suspension with lift and lower valve * Axle tools Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: * Complete steel structure is automatically shot-blasted with a blast wheel machine after welding * Second blasting treatment with corundum for optimal coating adhesion * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) * ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 * 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * At the galvanized front terminal strip, yellow-red air couplings * Mount at the rear sector of the gooseneck for ALU loading ramps * Galvanized folding supports under the chamfer of the loading platform * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load pressure gauge for axle load determination, including loading diagram * On the gooseneck, removable aluminium side and rear boards approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container pockets in the loading platform for one 20' (30') or one 40' container * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in th

Stanje: rabljeno, največja dovoljena obremenitev: 36.650 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Equipment extract Load area: - Load platform with extendable design featuring pneumatically operated locking system. - 2 pairs of flat lashing rings (LC 5,000 daN). - 1 pair of lashing rings in the gooseneck (LC 10,000 daN). - 6 pairs of outward-folding lashing rings (LC 5,000 daN). - 3 pairs of outward-folding lashing rings (LC 10,000 daN). - Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN). Landing legs: - JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Tyres: - Tyres 245/70 R 17.5 – brand at our discretion. Load index (146/146F). Axles: - BPW axles, hydro-mechanically forced steering. - Air suspension with raising and lowering valve. - Axle tools. Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel construction: - Steel structure made of high-strength fine-grain steel grades: S355J2+N/S355MC (yield strength 355 MPa) and S690QL/S700MC (yield strength 690 MPa). Painting: - Premium, durable corrosion protection through 2-component (2K) zinc dust primer applied to the standard shot-blasted welded frame. - High-quality 2-component (2K) topcoat, single-color in RAL 3002 Carmine Red. - Rear section metallized and painted in RAL 9010 Pure White. - Rims silver (no metallic paint available). Electrical system: - Electrical installation as per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098). Warning signs: - One holder each on the gooseneck and rear panel, left and right, for warning signs including socket. Including the following additional features: - Remote steering from front and rear via cable remote with push buttons, includes single-track control of the axles (no installation in the tractor unit required). - Electro-hydraulic unit (± 45 kg). - 4 wheel chocks with holders on the front wall (± 5 kg). Dusdpox Epznefx Adqjr - 2-inch kingpin. - One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35 kg). - Yellow-red air couplings on the galvanized front connection rail. - Yellow reflector tape in accordance with EU regulations on the sides, extension, and rear of the trailer. - European reflector signs (red-yellow) on the rear of the trailer. - One mud flap on the rear of the trailer. - Manual and description on USB stick. - Holder for a beacon on the rear of the trailer. - Load platform with heavy-duty hardwood floor. - 9 pairs of stake pockets, approx. 100 x 50 mm, in the outer frame of the load area (± 27 kg). - Extensions, galvanized, extendable up to approx. 230 mm each side (± 230 kg). - Spiral cable for supplying the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with NATO-NATO connections. - Galvanized supports under the sloped section of the load area. - Anti-slip sand coating applied to the central beam. - 6 pairs of WADER container locks in the load area for 1x20' container, 2x20' containers or 1x40' container; an additional locking position is provided in the extension for a 45' container (± 90 kg). - 4 pairs of transverse stake pocket strips, mounted across the load area for loose stakes approx. 100 x 50 mm (± 145 kg). - Storage for max. 9 pairs of loose stakes, approx. 100 x 50 mm, on the inside of front wall.

Stanje: novo, največja dovoljena obremenitev: 37.820 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available on request. Gooseneck: - Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing stripes approx. 15 x 15 mm, including widenings at the bottom - Between the 1st and 2nd axles, one fixed pair of wheel recesses approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-part removable galvanized covers over the wheel recesses (W approx. 670 mm), max. point load approx. 5 t/piece - Recess in the bevel and extending into the loading platform for accommodating excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of folding-out lashing rings (LC 5,000 daN) - 3 pairs of folding-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) One-Piece Steel Ramps: - 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting system, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not need to be considered in the vehicle length in transport position Dodpfxow Tpqwj Adqsur Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load per axle: 12,000 kg - Electro-magnetic reverse lockout, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF, brand of our choice - TPMS tyre monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. To display correctly, the tractor unit must be able to receive and show this data. Brake System: - WABCO brake system in compliance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - 24 Volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front terminal bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot blasted with a turbine blasting system after welding - Second blasting process with corundum for optimum coating adhesion - HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection - Final paint with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system - Rims in silver - Rear section metallized and in RAL 9010 (con...