Faymonville Odprta Platforma nakup rabljenega (180)

Stanje: rabljeno, barva: modra, Leto izdelave: 2017, Faymonville F-S42-1ACA. Letnik: 2017. 11,2-tonske osi SAF. Teža: 12.110 kg. Nosilnost: 25.890 kg. Maksimalna teža: 38.000 kg. Nosilnost priklopa: 18.000 kg. Sistem EBS ABS ALB. Hidravlični sistem priklopnega vozila, združljiv s standardom NATO. Hidravlično snemljiv priklop. Zračna vzmetitev. Rezervno kolo. Servo volan. Daljinski upravljalnik. 5-metrska raztegljiva platforma. Dimenzije: Osnava: D: 4000 mm. Š: 2550 mm. V: 1550 mm. Višina priklopa: 1200 mm. Platforma: D: 6300 mm. Š: 1000 - 2540 - 3000 mm. V: 450 mm. Debelina platforme: 300 mm. Zadnja stran priklopnika: D: 2800 mm. Š: 2550 mm. V: 950 mm. Pnevmatike: 235/75R17,5, 80 %. Na voljo 2 kosa! Priklopnik nemške izdelave! Številka ID: 596. Bledpfxjzya Rgj An Tel Splošni pogoji Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vsa sklenjena sporazuma s strani Heinhuis in za pogajanja, ki predhodijo tem sporazumom. S kakršnim koli odzivom potrjujete veljavnost splošnih pogojev družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2017 Lastna teža: 12.110 kg Nosilnost: 25.890 kg Dovoljena skupna masa: 38.000 kg Raztegljiv nadgradni del: Da = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2009, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2009, Dodatne informacije: Znamka: FAYMONVILLE Model: Telemax Zgradba: nizkopodni priklopnik (platforma D=13.330-17.530 mm, raztegljiva / V=1.400 mm) Leto: 01.2008 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 13.800 mm / 2.550 mm Mase: polna/prazna: 59.000 kg / 11.310 kg VSE OSI KRMILJENE Modelno leto: 2007 Tip vzmetenja: zračno Zavore: bobnaste Krmiljenje: krmiljeno = Več informacij = Vzmetenje: zračno vzmetenje Srednja os: krmiljena Zadnja os: krmiljena Lastna masa: 11.310 kg Nosilnost: 47.690 kg Bljdpszhvqlefx An Tjl Skupna masa: 59.000 kg

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. Bljdpfx Aeg Sk Tren Tel 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: rabljeno, lastna masa: 10.650 kg, največja dovoljena obremenitev: 40.310 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, skupna dolžina: 13.100 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Za vsak rabljen priklopnik prejmete aktualno in celovito poročilo o pregledu in funkcionalnosti. Gosi vrat: -Gosi vrat s trdo leseno oblogo debeline 30 mm -Gosi vrat zadaj v ravni izvedbi -3 pari pritrdilnih obročev (nosilnost 5.000 daN) Nosilna površina v izvlečni izvedbi: -Nosilna površina v izvlečni izvedbi -5 parov pritrdilnih obročev, ki se zložijo navzven (nosilnost 5.000 daN) -3 pari pritrdilnih obročev, ki se zložijo navzven (nosilnost 10.000 daN) -1 par pritrdilnih obročev, nameščenih v ležečem položaju na sprednji strani nosilne površine (nosilnost 10.000 daN) -Izrezi na zunanjem okvirju nosilne površine za obešanje zateznih trakov (nosilnost 2.000 daN) -Trda lesena obloga debeline približno 48 mm, nad osmi je obloga iz valjane pločevine Osi in pnevmatike: -Osi BPW, dve osi fiksni, dve osi s krmiljenjem -Zračna vzmetenje, s bobnastimi zavorami, z funkcijo dvigovanja/spuščanja -Krmiljene osi z elektromagnetsko blokado za vzvratno vožnjo, ki se aktivira s prestavo za vzvratno vožnjo ali ročno -Orodje za osi -Pnevmatike 205/65 R17.5 -Sistem za nadzor tlaka v pnevmatikah TPMS, v skladu s standardom ECE R 141 Dodatna oprema vključena: -En rezervni kolesni komplet z nosilcem pred čelno steno -2" kraljevska vlečna glava Blodoxwnfmepfx An Tjl -Pocinkana jeklena čelna stena, približno 400 mm visoka -Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke -4 kosi zavor, z nosilcem na čelni steni -Pocinkane zložljive opore pod poševnino nosilne površine -Nosilec za rotacijsko luč na zadnji strani priklopnika -Razširitve, pocinkane, izvlečne za približno 230 mm na stran -Bel odsevni trak v skladu z direktivami EU, nameščen na boku, na izvlečnem delu in zadaj rdeče barve -Na gosi vratu in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico -Lovilec umazanije na zadnji strani priklopnika -Evropske odsevne table (rdeče-rumene) na zadnji strani priklopnika -Na gosi vratu in na zadnji steni, ALU stranske plošče in zadnja plošča, ki se vstavi, približno 2.440 x 400 mm -Zadnji, pocinkani stranski nosilci so snemljivi. Dolžina nadgradnje približno 2.560 mm -7 parov WADER posod za zabojnike: -1 x 20-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik nad gosi vratom -2 x 20-stopični zabojniki -Podporni blok z 1 parom WADER posod za zabojnike (največja nosilnost približno 20.000 kg) -7 parov posod za stranske nosilce za vstavne nosilce 100 x 50 mm v zunanjem okvirju nosilne površine -Dvignjena os na sprednji osi, upravljanje preko TEBS E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenitve -Pomikalna vstavna letev za ALU rampe na zadnji strani vozila -Na valjani pločevini na gosi vratu in na nosilni površini, nanos plasti peska za preprečevanje zdrsavanja -Štiri izvlečne opozorilne table, približno 400 mm, približno 423 x 423 mm, z pozicijsko lučjo -Na opozorilnih tablah nosilec za rotacijsko luč -Nalepka za omejitev hitrosti 80 km/h zadaj in na obeh straneh -Merilnik obremenitve za ugotavljanje obremenitve osi, vključno s tabelo obremenitve

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Blodpfx Aog Sk T Djn Tjl Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg Blodjwvzg Ropfx An Tjl * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Blodpfx Aneizu Nws Tsl Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Hydraulic connections from gooseneck to low-bed

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Blsdpfoizu Ntsx An Tjl Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Bjdpfxemfqi Is An Toll Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control Bsdpfx Anjrvw U Se Tsll • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: novo, največja dovoljena obremenitev: 36.461 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Leto izdelave: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. Bledow Dl Hwepfx An Tjl 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings at the front central beam (LC 10,000 daN). C40/4 grating floor (point load 2.3 t on an area of 20 x 20 cm), over the axles checker plate covering. Two-part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections, hydraulic lifting system. Max load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length of 16,500 mm when in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in line with ECE R 141. Data transmission to the towing vehicle is via the standardised EBS interface according to ISO 11992. The towing vehicle must be able to receive and display this data for correct indication. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit. Electrical System: Electrical system according to EU regulations, LED lighting 24 V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15 pin. Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction made of high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Curtainsider Structure: Curtainsider body, ??? 3,960 mm ??? - Galvanised front wall with a tensioning mechanism for sliding curtains. - "EDSCHA" roof, forward sliding on ALU roof beam profiles (bolted to front and rear wall). - 3 pairs of sliding stanchions in the loading platform. - The body is hydraulically extendable at the rear by approx. 750 mm left and right. - Sliding roof with upward folding portal beam. - Sliding curtain with 700 mm length reserve and tie-down straps approx. every 600 mm. Height upper edge of body approx. 3,960 mm (laden). - Driving with an open sliding roof is not permitted and will cause damage to the curtain. Paintwork: Entire steel structure is shot-blasted automatically after welding using a wheel blast system. Second blasting with corundum for optimal coating system adhesion. HRM-metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection. Final painting with two layers of 2K topcoat, single colour, shade selectable according to RAL 841GL. Rear section metalized and painted RAL 9010 (pure white). No metallic paint.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Blodox Upxxspfx An Tol Price: On request FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 8.000 kg, prva registracija: 11/2017, skupna dolžina: 135.000 mm, skupna širina: 2.540 mm, skupna višina: 780 mm, barva: črn, Leto izdelave: 2017, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi Zadnja os 1: Največja osna obremenitev: 8000 kg Zadnja os 2: Največja osna obremenitev: 8000 kg; Krmiljena Zadnja os 3: Največja osna obremenitev: 8000 kg; Krmiljena Zadnja os 4: Največja osna obremenitev: 8000 kg; Krmiljena Teže Bledpfx Ajyx Hwysn Tel Lastna teža: 14.800 kg Nosilnost: 42.200 kg Skupna dovoljena masa: 57.000 kg Stanje Tehnično stanje: dobro Optično stanje: dobro Poškodbe: nobenih Finančne informacije Cena: Na zahtevo Dodatne informacije Za več informacij se obrnite na David F Middelman.

Stanje: rabljeno, številka stroja/vozila: YAFTL410000011078, konfiguracija osi: 3 osi, prva registracija: 01/2010, skupna dolžina: 18.200 mm, skupna širina: 2.750 mm, skupna višina: 2.550 mm, vzmetenje: zrak, barva: drugo, Leto izdelave: 2010, Posebni prevoz Dolžina čez osi: 560 cm Dolžina nakladalne površine: 750 cm Dolžina labodjega vratu: 500 cm Nizkopodne prikolice: ✓ Maksimalna širina: 313 cm Bledpfx Answid Dle Tjl Razširljiv: ✓ Izvlečljiv: ✓ = Dodatne informacije = Znamka osi: Saf Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Prednja os: dvojna pnevmatika; krmiljena; profil pnevmatike levo zunaj: 80 %; profil pnevmatike desno zunaj: 75 % Srednja os 1: dvojna pnevmatika; krmiljena; profil pnevmatike levo zunaj: 80 %; profil pnevmatike desno zunaj: 75 % Srednja os 2: dvojna pnevmatika; krmiljena; profil pnevmatike levo zunaj: 90 %; profil pnevmatike desno zunaj: 90 % Zadnja os: dvojna pnevmatika; krmiljena; profil pnevmatike levo zunaj: 90 %; profil pnevmatike desno zunaj: 90 % Dovoljena skupna masa: 80.000 kg Registrska številka: Y0101796 = Podatki o podjetju = Za več informacij o tem vozilu pokličite: ali pošljite e-pošto na: . Celoten pregled zaloge najdete na: . Ne pozabite se prijaviti na naše novice za tedenske posodobitve o zalogi.

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17,5, barva: siv, Leto izdelave: 2016, Faymonville F-S42-2ACB. Letnik: 2016. 12 ton osi SAF Pendel-X. Teža: 12.700 kg. Nosilnost: 36.300 kg. Maksimalna teža: 49.000 kg. Nosilnost pete: 25.000 kg. Raztegljivost: 4,2 metra. Razširitev: 3 metre. 2 x 25 cm razširitev, vključno z možnostjo razširitve. Hidravlično vzmetenje. Hidravlično odstranljiva vlečna prikolica (gooseneck). Hidravlični sistem, združljiv z NATO. Radijski daljinski upravljalnik. EBS ABS ALB. Aluminijaste plošče na prikolici. 3 odstranljivi deli tal. Prevleka iz cinka. Dimenzije: Prikolica (gooseneck): D: 3700 mm. Š: 2480 mm. V: 1600 mm. Višina pete: 1200 mm. Platforma: D: 6350 mm. Š: 2550 mm. V: 350 mm. Debelina tal: 220 mm. Zadnji del prikolice: D: 2600 mm. Š: 2550 mm. V: 1000 mm. Pnevmatike: 245/70R17,5, 70 %. Nemška prikolica! ID št.: 565. Splošni pogoji Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, vse pogodbe, sklenjene s strani družbe Heinhuis, in pogajanja, ki jim sledijo. S kakršnim koli odzivom potrdite veljavnost splošnih pogojev družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Splošne informacije Letnik: 2016 Konfiguracija osi Velikost pnevmatik: 245/70R17,5 Znamka osi: SAF Pendel-X Vzmetenje: hidravlično vzmetenje Zadnja os 1: dvojne pnevmatike; maks. obremenitev osi: 12.000 kg; krmiljena; profil pnevmatik levo znotraj: 70 %; profil pnevmatik levo zunaj: 70 %; profil pnevmatik desno znotraj: 70 %; profil pnevmatik desno zunaj: 70 % Zadnja os 2: dvojne pnevmatike; maks. obremenitev osi: 12.000 kg; krmiljena; profil pnevmatik levo znotraj: 70 %; profil pnevmatik levo zunaj: 70 %; profil pnevmatik desno znotraj: 70 %; profil pnevmatik desno zunaj: 70 % Bledozp Nrrjpfx An Tol Teže Lastna teža: 12.700 kg Nosilnost: 36.300 kg Maksimalna dovoljena masa: 49.000 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro = Informacije o podjetju = Za več informacij:

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: Bjdpfx Ajy Uwu Isn Toll * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: novo, največja dovoljena obremenitev: 40.017 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Technical Specification Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading platform: 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of flat lashing rings at the front end of the platform (LC 10,000 daN). Approx. 48 mm hardwood flooring, over the axle areas with checker plate covering. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load). Tyres: 205/65 R17.5 tyres, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit occurs via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transferring and displaying this data. Axles: BPW axles, two rigid, two self-steering, air-suspended, drum brakes, with lift/lower function. The self-steering axles have an electromagnetic reverse lockout, activated via reverse gear or manually. Axle tool included. Brake System: WABCO braking system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor. Blsdpfxjw Dl Hqs An Tjl Electrical System: Electrical system per EU regulations, LED lighting, 24V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets. Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: High-strength fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: Entire steel construction automatically shot-blasted after welding. Additional blasting with corundum for optimal coating adhesion. HRM-metallisation of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection. Final coating with 2 layers of 2K top coat, single-colour to customer choice according to RAL 841GL. Rear section metallised and painted in RAL 9010 (pure white). Metallic paints not possible. Paint finish tested with salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options Included: 2" king pin Galvanised steel front wall. Yellow-red air couplings on galvanised front connection rail. 2 wheel chocks with holder at the front wall. Rear gooseneck ramp mounts for ALU loading ramps. Further options available.

Stanje: rabljeno, barva: rumena, Leto izdelave: 2013, Faymonville STZ-3UB. Leto: 2013. 10-tonske osi SAF. Teža: 12.300 kg. Nosilnost: 29.700 kg. Maksimalna teža: 42.000 kg. Obremenitev pete: 18.000 kg. Servovolk z 3 krmilnimi osmi. Razcepljena talna površina. Blodpfxszyaxke An Tsl Vinska. Aluminijaste plošče na sprednjem delu. Hidravlični sistem prikolice, združljiv z NATO. Radijski daljinski upravljalnik. Zračna vzmet. Hidravlični most od talne površine do sprednjega dela. Dolžina: 3000 mm. 2 točki hidravličnih opornikov na zadnji strani. 2-smerne hidravlične rampe: Dolžina: 2800 + 1700 mm. Dimenzije: Sprednji del: D: 3750 mm. Š: 2500 mm. V: 1380 mm. Višina pete: 1150 mm. Talna površina: D: 9600 mm. Š: 2550 mm. V: 900 mm. Pnevmatike: 245/70R17,5, 80 %. ID št: 676. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, za vse pogodbe, sklenjene s podjetjem Heinhuis, in za pogajanja, ki jim predhodijo. S kakršnim koli odgovorom potrdite veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se z njimi seznanili. Naše cene so izvozne neto cene. = Dodatne informacije = Leto izdelave: 2013 Lastna teža: 12.300 kg Nosilnost: 29.700 kg Maksimalna dovoljena masa: 42.000 kg = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2016, Faymonville F-S43-1EJB. Leto: 2016. Bsdpozmt Ewjfx An Tjll 9-tonske osi BPW. Maksimalna teža: 45.000 kg. Nosilnost čepa: 18.000 kg. EBS ABS ALB. Hidravlični sistem, primeren za standard NATO. Hidravlično vzmetenje. 9500 mm. Pnevmatike: 385/65R22,5, 80-odstotna obraba. Številka ID: 521. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vse pogodbe, ki jih sklene družba Heinhuis, ter za pogovore, ki jim predhodijo. S kakršnim koli odgovorom se strinjate z veljavnostjo splošnih pogojev poslovanja družbe Heinhuis in potrđujete, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Leto izdelave: 2016 GVW: 45.000 kg = Informacije o podjetju = Za več informacij:

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function Bljdpfx Aoh Hm Then Tol - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: rabljeno, barva: rumena, Leto izdelave: 2013, Faymonville STZ-3UB. Letnik: 2013. Bjdpfxjzybhys An Tell 10-tonske osi SAF. Teža: 12.300 kg. Nosilnost: 29.700 kg. Maksimalna teža: 42.000 kg. Obremenitev kraljice: 18.000 kg. Servo volan, 3 krmiljene osi. Režana plošča. Vinska. Aluminijaste plošče na sprednjem delu. Hidravlični sistem prikolice, združljiv z NATO. Radijski daljinski upravljalnik. Zračna vzmetitev. Hidravlični most, ki se dviga od tal do sprednjega dela. Dolžina: 3000 mm. 2 dvižna oporna točka na zadnji strani, hidravlična. 2-delna hidravlična rampa: Dolžina: 2800 + 1700 mm. Dimenzije: Sprednji del: D: 3750 mm. Š: 2500 mm. V: 1380 mm. Višina kraljice: 1150 mm. Plošča: D: 9600 mm. Š: 2550 mm. V: 900 mm. Pnevmatike: 245/70R17,5, 80 %. ID št.: 436. Splošni pogoji poslovanja družbe Heinhuis veljajo za vsa oglaševanja, ponudbe in ponudbe družbe Heinhuis, za vsa sklenjena sporazuma s podjetjem Heinhuis in za pogajanja, ki jim sledijo. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2013 Lastna teža: 12.300 kg Nosilnost: 29.700 kg Dovoljena skupna masa: 42.000 kg = Podatki o podjetju = Za več informacij:

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: Bodpfxozahp Se An Tsll * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Bljdev D Abtjpfx An Tel

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. Blodpfxoy Auh Ij An Tsl GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: dober (rabljeno), številka stroja/vozila: YAFTL6002R0035345, dolžina tovornega prostora: 14.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 9.000 mm, Leto izdelave: 2024, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Bobnasti zavorni sistem = Dodatne informacije = Nosilnost: 81.100 kg Skupna dovoljena masa: 81.100 kg Tehnično stanje: dobro Vizualno stanje: dobro Bledpex Rtiajfx An Tel Stanje sprednjih pnevmatik: 60 Sprednje pnevmatike: 245/70 R17.5 Zadnje pnevmatike: 245/70 R17.5 Zadnji pregled: 28.12.2025 Za več informacij kontaktirajte Lastas Sales.