Nizki nakladalnik

Faymonville 4-2+2-Achs-Tele-Semi m. Radmulden u. Rampen

Gooseneck:
Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm
Gooseneck rear with chamfering approx. 1,000 mm x 10°

Loading Platform:
Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10°
Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick
Pneumatic locking with conical pin and reinforced locking positions
Supply lines routed protected within the extendable beam, adapting to the respective platform length

Ramps:
1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm
Hydraulically folding ramp tips
Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside

Axles and Suspension:
BPW axles and suspension, two rigid axles, two steering trailing axles
Electromagnetic reverse lock, activated via reverse gear and manually
Air suspension with lift and lower valve
Axle tool
Tyres: 235/75 R17.5 3PMSF twin tyres
Load index: 143/141J (144/144F)

Brake System:
WABCO braking system, EBS-E in accordance with EU regulations

Lighting System:
24-volt lighting system in "ASPÖCK-NORDIK full LED"

Metalizing:
Standard HRM metallization of the outer frame
Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined

Steel Construction:
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welders certified as per DIN-EN 287-1
MAG welding process according to EN ISO 4063
Shielding gas M21 as per EN ISO 14175

Accessories Included:
Front wall made of steel, plug-in, height approx. 400 mm
ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin
24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098
Round NATO socket on the front connection strip
Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO)
3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches
1 spare wheel with mounting adapter
Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm
2 pairs of screw-in lashing rings included
One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring
1 pair of screw-in lashing rings
Approx. 40 mm thick hardwood covering above the gooseneck
On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized
On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized
2" kingpin
Gooseneck guide plate for fifth wheel, approx. 500 mm wide
4 wheel chocks with holder
Holder for aluminium approach ramps
Mechanical landing gear with 2-speed gearbox and crank
Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles
Platform locking with conically welded locking profiles every 250 mm incl. tension plate
Slotted holes at the front of the loading platform for attachable and adjustable bridging elements
Dcjdpfx Aek Ahugjcwep
1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering
Front and rear with slotted holes

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.