Müller-Mitteltal Nizki Nakladalnik nakup rabljenega (268)

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing gear, front * External folding supports, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis * 50 mm softwood flooring, clamped * Preparation in front of front wall for subsequent installation of container locks * Bolted front wall, smooth sheet * Split side walls, steel sheet, trapezoidal profile—foldable with central folding stakes * Steel rear wall, sliding between ramps—holder inside front wall when not in use * Bolt-on rear stakes ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing rings every 600 mm * Load securing package: Each front and rear corner 1 x 10 t UVV lashing ring, each side 2 x 8 t UVV retractable lashing rings in outer frame; in front and end crossmember various bores for 1.2 t lashing options ----Ramps: * One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75 R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air reservoirs, flange eye, and landing gear painted black--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer warranty Nledpsmi Tcqjfx Akxsh * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System Nljdpfx Akopk Dv Rexoh * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 5.900 kg, skupna masa: 9.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2020, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 5 m³, Oprema: ABS, * ABS * 5-komorna zadnja svetla * Podesivi vučni uređaj po visini * Gigant osovine * Prednji oslonac na navijanje Nljdpfxsyncyhj Akxeh ----Nadgradnja: Niskopodni prikolica, približna visina utovara 870 mm, zadnji deo zakošen, visina uspona približno 780 mm, opružno rasterećene čelične stranice levo i desno, drveno dno, prstenovi i ušice za vezivanje. Opružno rasterećene i bočno pomične rampe za uspon sa vatrootpornim i protivkliznim rešetkastim prečkama od pocinkovanog čelika (dužina cca 2.600 mm), automatska zadnja podrška povezana s upravljanjem rampama, plastična kutija za alat ispred prednjeg zida. Šasija/prednji zid/vučno vratilo/zadnji zid/rampe i stubići pocinkovani. Prodaja isključivo pravnim licima. KOD IZVOZA SE PLAĆA SAMO CENA BEZ PDV-A!!!!! SVE INFORMACIJE BEZ GARANCIJE, POSEBNO OPREMA I DODACI. Osnov za sve kupoprodajne ugovore, fakture, profakture, narudžbine i prodajne razgovore su naši Opšti uslovi poslovanja (vidi Impressum).

Stanje: rabljeno, lastna masa: 3.500 kg, največja dovoljena obremenitev: 9.500 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/1993, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, jeklena nadstavba, 2 osi, tandem, listnata vzmetna vzmet, pritrdilne točke, zaščita podvozja, oporni mehanizem na sprednji strani, nihajne zapornice. Nlsdpfxozgu Sfe Akxsh Nadstavba: Tandem, 3-stranski nakladalni prikolica. Rezervno kolo na voljo proti doplačilu! PODATKI O DODATNI OPREMI SO NAVEDENI BREZ GARANCIJE, pridržane spremembe, vmesna prodaja in napake!

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profil 30,0 ----Zavore: * EBS-E (elektronski zavorni sistem) * Sistem za odklepanje zavor v primeru izrednih razmer za cilindr vzmetne zavorne enote * Bobnaste zavore ----Osi: * 3 x 11 ton BPW Eco osi ----Vzmetenje: Nlsdpfx Astplv Nskxjh * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ----Vlečna prikolica: Vlečna prikolica s 40 mm vlečnim ujčkom in nastavitvijo višine prek vzmetne palice in napenjalnega mehanizma ----Elektrika / Osvetlitev: * SmartBoard kot informacijsko orodje na prikolici z tlačnimi senzorji za prikaz tlaka za skupni prikaz obremenitve osi na posamezni skupini osi * 15-polni priključni vtič * LED-osvetlitev 12 / 24 V * LED-okrogla luč (snemljiva) zadaj * Stranske markerne luči s funkcijo smerokaza * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS (brez vgradnje na strani tovornjaka) ----Splošni dodatni deli: * stranski zaščitni element ob trku * mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * sprednji pokrov blatnika iz plastike in zadnji, ravno pocinkan pokrov, oba s pršilno zaščito * pokrov (vroče pocinkan) za orodjno omarico v platformi podvozja * Orodjna omarica iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm (črna, prašno lakirana), na desni strani ----Površina nizkega priklopnika: * na obeh straneh po 4 nosilnih žepov s hkratno možnost pritrditve tovora do 2 toni * gumijasta prevleka na zložljivih rampah ter na nagibni površini na levi in desni strani (približno 860 mm dolga) * gumijasta prevleka na vzdolžnih nosilcih od čelnega do zadnjega nosilca * trden leseni pod področjem vožnje na platformi nizkega priklopnika * nosilci za les pod nosilno površino v vzdolžni smeri * opora valjev pred čelnim nosilcem, dvignjena, z 1 x 6,4 tone pritrdilnega ujčka na obeh straneh ----Paket za pritrditev tovora (La-Si-Paket, sestavljen iz): * 5 parov UVV pritrdilnih zank, vrtljivih in znižljivih, obremenljivih v vseh smereh in vgrajenih v zunanji okvir – v kotih 13,4 tone, sicer 10 ton * 6 parov mehanskih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnji nagibni površini) ----Rampe: * Hidravlične zložljive rampe (približno 4.650 x 720 mm) s hidravlično razširjenim koncem in ventili za zadržanje tovora * hidravlični bočni premik ramp ----Hidravlika: * hidravlični razdelilnik pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 litrov do največ 140 litrov/min) * Hidravlični nadzorni blok, zaščiten pred brizganjem vode * Dvovodnična hidravlika ----Zadnja opora: * zadnja opora, hidravlična (eno stopenjski cilinder) ----Dimenzije nosilne površine: * Nosilna površina nad vrtljivim obročem: približno 1.960 x 2.520 mm * zadnja nosilna površina: približno 6.500 x 2.520 mm (vključno z 860 mm nagibno površino) * višina nakladanja, natovorjena, približno 890 mm +/- 20 mm, zračno vzmetenje ----Barvanje: * Podvozje, podvozje, opora valjev, zložljivi podaljški in rampe, vroče pocinkani. * Osi, vrtljivi obroč, vlečna prikolica, posoda za zrak itd., barvani v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja rezervirani ----Čas dobave: * takoj na voljo v Egestorfu

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, Leto izdelave: 2026, RA-T 18,0: Obremenljiv spredaj in zadaj ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za izredno sprostitev zavor za zračne zavore * Kolutne zavore 19,5" * Avtomatsko zavorjenje ob odpiranju prečnega nosilca ----Osi: * 2 x 10 t BPW široke osi ----Vzmetenje: Nljdpfx Akel Tn U Rexeh * Zračno vzmetenje (avtomatsko spuščanje ob odklopu zavor) ----Elektrika / Osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS – brez vgradnje na strani tovornjaka * 15-polni priključek za elektriko * LED-osvetlitev s zaščitnim pokrovom * 2 LED-luči za vzvratno vožnjo (upravljanje prek vzvratne prestave) ----Povezovalna priprava: * Pnevmatsko spuščana povezovalna priprava, dolžine 1.800 mm, z 40 mm priključkom in nastavitvijo višine s pomočjo vzmetne povezave in zapornice ----Splošni dodatni deli: * Plastična orodjarna škatla 858 x 500 x 500 mm na desni strani * Shranjevalni predal za mreže za pritrditev tovora, izdelan iz pocinkane perforirane pločevine, dimenzije 1.000 x 500 x 500 mm, nameščen na strani * Zaprti plastični blatniki spredaj in zadaj * Zaprti stranski odbijač (RAL 9010 čista bela) kot reklamna površina * Zadnji podvozni odbijač * Plastični odbijač zadaj * Zložljiv A-znak * Opozorilni znak za nevarne snovi s priključeno mapo za spremljevalno dokumentacijo ter odsevna parkirna opozorilna tabla zadaj ----Površina za kontejner: * Dodatno obremenjevanje spredaj z možnostjo spuščanja tirnic zadaj in vtičnim nosilcem * Vdolbine za valje v območju vrtilnega obroča z mehansko nastavljivimi kotnimi omejitvami (2 položaja) spredaj levo in desno na tirnicah * Dolžina tirnic približno 6.830 mm * Pnevmatska 4-točkovna zapora * Za transport zunanjih valjnih kontejnerjev po standardu DIN 30722, del 1 – na voljo je certifikat za pritrditev tovora (Dekra). ----Višina nakladanja: * obremenjeno približno 1.130 mm ----Barvanje: * Podvozje in deli zapornice so pocinkani * Zračni rezervoar, osi, vrtilni obroč in povezovalna priprava so pobarvani v črni barvi ----Informacije: * --Dovoljena skupna masa 20.000 kg je tehnično možna-- * Novo vozilo brez prve registracije z garancijo proizvajalca * Napake in vmesna prodaja pridržane * Ilustrativne slike ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9,6 ----Zavore: * EBS (električni zavorni sistem) * Sistem za izpust zraka v primeru izredne zavore za cilindrične zavorne zavore * Bobnasta zavora ----Os: * Os SAF ----Vzmetenje: * Parabolične vzmeti ----Povezovalna palica / prirobnična povezovalna palica: * Povezovalna palica kot osrednja povezovalna palica s 40 mm vijakom * Neomejena nastavitev višine povezovalne palice s pomočjo vijačnega mehanizma namesto trdne povezovalne palice ----Višina spojke: * Standardna višina spojke pribl. 900 mm (+/- 150 mm) ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS – brez dodatne namestitve v vozilu * 15-polni električni vtič * LED zadnje luči * utripajoče stranske markerne luči ----Splošni dodatni deli: * Sprednji podpiralni mehanizem * Zaščitni blatniki iz plastike * Zložljiv spodnji ščit za asfaltersko strojo Nledpfx Akow Ndr Uexsh ----Podvozje: * Podvozje iz finozrnatega jekla ----Kipna prikolica: * Paletna, 3-stranska kipna nadstavba * 700 mm jeklena sprednja stena * Alumijaste stranske stene, asimetrične – neprekinjene, brez osrednjega podvoja – zložljive z dolgimi zapahi in nihajoče s pomočjo ročne centralne zapornice * Jeklena zadnja stena, 800 mm visoka, z avtomatskim odpiranjem zadnje stene pri kipanju nazaj * 4 mm jeklena tla iz jekla Hardox 450 ----Varnostno pritrjevanje tovora: * Na obeh straneh po 2 para 3 t pritrjevalnih zank, potopljenih v jeklena tla in zložljivih ----Barvanje: * Podvozje, povezovalna palica, spodnji ščit – vroče pocinkano * Barvanje kipne prikolice v želeni barvi RAL (vendar brez posebnih ali metalik barv) – sprememba možna do približno 6 tednov pred dokončanjem ----Informacije: * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Prodaja je pogojena z razpoložljivostjo ----Dobavni rok: * Na voljo takoj, dobava iz Egestorfa.

Stanje: rabljeno, največja dovoljena obremenitev: 23.180 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 10.805 mm, skupna širina: 2.550 mm, Skupna masa: 24.000 kg / 30.000 kg Lastna masa: 6.820 kg Nosilnost: 17.180 kg / 23.180 kg Skupna dolžina: 10.805 mm Dolžina tovornega prostora: skupaj približno 8.300 mm / približno 6.500 mm za nizkopodvojno različico, vključno z zadnjim delom Nljdpfxszwkkre Akxsh Širina: 2.550 mm Višina tovornega prostora: 900 mm Dodatne informacije: Niše za kolesa Nagibne plošče Stranske nagibne plošče, ki se premikajo vstran Rotacijska luč Opozorilne table spredaj in zadaj Dvojne pnevmatike Os BPW Plastična orodjarna omara Zložljiva zadnja opora Niša za bager, približno 2.400 mm x 800 mm Velik komplet pritrdilnih trakov Pritrdilne obroče na zunanjem okvirju Prostor za shranjevanje v ukrivljenem delu

Stanje: rabljeno, lastna masa: 8.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 08/2019, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl. 9.500 mm, dolžina tovorne površine nizkega ležišča pribl. 7.360 mm, višina nakladanja pribl. 910 mm, 14 parov pritrdilnih obročev, vozilo se prodaja po naročilu stranke. Pridržujemo si pravico do tiskarskih napak, sprememb in napak, slike so vzorčne. Več podatkov na zahtevo! Nlsdpfe Adq Smex Akxoh

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, T3 Profil 30,0 ----Zavore: * Sistem zavore EBS * Naprava za hitro sproščanje zavor za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 3 x 11 ton BPW Eco osi ----Vzmetenje: * Parabolične vzmeti * mehansko izravnavanje osi zadaj ----Vlečna priprava: * Vlečna priprava s 40 mm vlečnim ušesom in nastavitvijo višine prek vzmetne vzmeti in zaporne ključavnice ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * Sistem večnapetostnih naprav * LED zadnje luči * Okrogla luč (snemljiva) zadaj * 15-polni električni priključek Nedpfx Asx Ipa Njkxslh ----Splošni dodatni deli: * Stranska zaščita * Podpirala zadaj na okvirju voznega podvozja * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji plastični blatniki in zadnji ravni jekleni zaščitni plati, oba s ščitnikom proti brizganju * Konturni trak stransko in zadaj, odsevni * Pokrov (vročepocinkan) za orodjarno v platformi podvozja ----Nosilna površina za nizke prikolice: * Stransko 4 žepi za podpore (vendar podpore niso priložene) z istočasno možnostjo pritrditve * 6 parov mehanskih iztegnih podpor za 3 metre skupne širine (vendar ne na zadnjem nagibu) * Podaljševalne plošče, položene na sredini nosilne površine ----Nosilec za roko bagra: * Nosilec za roko bagra nad zadnjo osjo do končnega nosilca, dolžina približno 2.100 mm (2 para 6,4 tone pritrdilnih točk stransko v nosilcu za roko bagra) ----Pripomočki za pritrditev tovor: (paket za pritrditev tovora, ki vključuje): * 2 pritrdilni točki (6,4 tone) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov pritrdilnih točk UVV, ki se lahko vrtijo in spuščajo, obremenljive v vseh smereh in vgrajene v zunanji okvir na vogalih 13,4 tone, sicer 10 ton ----Nakladalne rampe: * Mehanske enodelne nakladalne rampe z vzmetmi (približno 3.000 x 720 mm) * Mehanska stranska premikanje ramp ----Nosilna površina: * Nosilna površina nad vrtljivim obročem: približno 1.960 x 2.520 mm * Zadnja nosilna površina: približno 6.500 x 2.520 mm (vključno z 860 mm nakladalnim nagibom) ----Višina nakladalne površine: * Višina nakladalne površine brez tovora: približno 1.070 mm * Višina nakladalne površine brez tovora: približno 910 mm ----Pnevmatike: * 235/75 R 17,5, dvojne pnevmatike ----Barvanje: * Podvozje, podvozni okvir, vlečna priprava in nakladalne rampe, vročepocinkane * Osi, vzmeti, zračni rezervoarji itd., obarvani v črni barvi * Vozilo je vročepocinkano ----Informacije: * --Tehnično je mogoče dosegti največjo dovoljeno bruto maso 30.000 kg-- * Novo vozilo s proizvajalčevo garancijo * Pridržujemo si pravico do sprememb in napak * Prodaja je možna, dokler ni vozilo prodano ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, T3 Profil 30,0 ----Zavore: * Sistem zaviranja EBS * Naprava za izpust zraka pri zasilnem zaviranju za vzmetne akumulatorske cilindre * Bobnaste zavore ----Osi: * 3 x 11 t BPW Eco osi ----Vzmetenje: * Listne vzmeti * Mehanski izravnalnik osi na zadnji strani ----Vlečna priprava: * Vlečna priprava s 40 mm vlečnim čepom in nastavitvijo višine s pomočjo vzmetne palice in napenjalnega zaklepa ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * Sistem z več napetostmi * LED zadnje luči * Okrogla luč (odstranljiva) na zadnji strani * 15-polni vtič ----Splošni dodatni deli: * Stranska zaščita pred trčenjem * Stranska podpora na zadnjem delu šasije * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji blatniki iz plastike in zadnji ravni jekleni ščitniki, oba z zaščito pred brizganjem * Odsevni trakovi ob straneh in na zadnji strani * Pokrov (vroče pocinkan) za orodje na platformi podvozja ----Površina za nizkotilni prikolici: * Na vsaki strani 4 luknje za pritrditev (vendar ni priloženih drog) z možnostjo hkratične pritrditve tovora * 6 parov mehanskih iztegnih podpor za 3 metre celotne širine (vendar ne na zadnjem pobočju) * Plošči za širitev, nameščene v sredini tovorne površine ----Nosilec za roko bagra: * Nosilec za roko bagra, ki sega od zadnje osi do končnega nosilca, dolg približno 2.100 mm (2 para 6,4 t pritrdilnih obročev ob straneh nosilca za roko bagra) ----Pripomočki za pritrditev tovora (paket, ki vključuje): * 2 pritrdilna obroča (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, ki se vrtijo in dvigajo, obremenljivi v vseh smereh in vgrajeni v zunanji okvir na vogalih, 13,4 t, sicer 10 t ----Nagibne rampe: * Mehanske, enodelne nagibne rampe z vzmetjo (približno 3.000 x 720 mm) * Mehanska stranska premikanje rampe ----Tovorine površine: * Površina nad vrtljivim obročem: približno 1.960 x 2.520 mm * Zadnja tovorna površina: približno 6.500 x 2.520 mm (vključno z 860 mm nagibom) ----Višina tovora: * Višina tovora brez obremenitve: približno 1.070 mm * Višina tovora brez obremenitve: približno 910 mm ----Pnevmatike: * 235/75 R 17,5 dvojne pnevmatike ----Barvanje: * Šasija, podvozje, vlečna priprava in nagibne rampe so vroče pocinkane * Osi, vzmeti, zračni rezervoar itd. so pobarvane v črni barvi * Vozilo je vroče pocinkano ----Informacije: Nedpfx Aex Ipavjkxolh * --Tehnično je mogoča največja dovoljena masa 30.000 kg-- * Novo vozilo z garancijo proizvajalca * Pridržane pravice glede napak in medprodaje ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profil 30,0 ----Zavore: * EBS-E (elektronski zavorni sistem) * Sistem za sprostitev zavor v sili za vzmetne akumulatorje * Bobnaste zavore Nsdjq Dyvcopfx Akxelh ----Osi: * 3 x 11 ton BPW Eco osi ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ----Povezava: * Povezava z 40 mm vtičnico in nastavitvijo višine s pomočjo vzmetne povezave in objemke ----Elektrika / Osvetlitev: * SmartBoard kot informacijsko orodje na prikolici s tlačnimi senzorji za prikaz tlaka za prikaz skupne obremenitve osi na posamezno skupino osi * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska luč (snemljiva) zadaj * Stranske gabaritne luči s funkcijo vklopa smernikov * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku preko EBS signala (brez namestitve na tovornjaku) ----Splošni dodatni deli: * stranski zaščitni odbijač * mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * sprednji plastični blatniki in zadnji pocinkani jekleni zaščitni robovi s stranskimi ščitniki proti brizganju * pokrov (vroče pocinkan) za orodje na platformi podvojnega kolesa * orodjarna iz pocinkanega jekla, približno 650 x 300 x 600 mm (črna, prašno barvana), na desni strani ----Površina nizkopodsestne prikolice: * na vsaki strani 4 vtičnic z možnostjo pripenjanja 2 ton * gumirana površina na zložljivih ploščah in na nagibni rampi na levi in desni strani (približno 860 mm dolga) * gumirana površina na vzdolžnih nosilcih od čelnega do končnega nosilca * trden leseni pod na površinah za vožnjo nizkopodsestne prikolice * držalo za deske pod površino v vzdolžni smeri * valjčni nosilec pred čelnim nosilcem, dvignjen, z 1 x 6,4 tone na vsaki strani * ----Paket za pritrditev tovora (pakет za pritrditev tovora): * 5 parov UVV pritrdilnih obročev, vrtljivih in spustljivih, obremenljivih v vseh smereh in vgrajenih v zunanji okvir - v kotih 13,4 tone, sicer 10 ton * 6 parov mehanskih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnji rampi) ----Rampe: * Hidravlične zložljive rampe (približno 4.650 x 720 mm) z hidravlično nastavljivo konico in varnostnimi ventili za zadrževanje tovora * hidravlični stranski pomik rampe ----Hidravlika: * hidravlični razdelilnik pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 litrov do največ 140 litrov/min) * hidravlični nadzorni blok, zaščiten pred brizganjem * hidravlični sistem z dvema cevovodoma ----Zadnja opora: * hidravlična zadnja opora (enostopenjski cilinder) ----Dimenzije tovornega prostora: * tovorna površina nad vrtilnim obročem: približno 1.960 x 2.520 mm * zadnja tovorna površina: približno 6.500 x 2.520 mm (vključno z 860 mm nagibne rampe) * višina tovorne površine pri obremenitvi približno 890 mm +/- 20 mm (zračno vzmetenje) ----Barvanje: * podvozje, vrtilni obroč, valjčni nosilec, zložljive podaljške in rampe, vroče pocinkani. * osi, vrtilni obroč, povezava, posode za zrak itd. pobarvane v črni barvi. ----Informacije: * novo vozilo z garancijo proizvajalca * napake in prodaja medtem rezervirani ----Dobavni rok: * na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: Nsdsl Th Nnspfx Akxslh * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: rabljeno, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, naslednji pregled (TÜV): 07/2025, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking mechanism, underrun protection, side aluminum side guard, twin tires. Body: 2-axle outer roller trailer for roll-off containers from 5.5 m to 7 m or 2x 10 m³ skip containers, BPW axles, drum brakes, pneumatic locking, pneumatic lowering drawbar. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nledpjxgilmofx Akxsh

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: Nljdpfxjl Tlhrs Akxeh * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) Nodpfxsxf Skvo Akxjlh ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Nlsdpoxf Skpefx Akxsh ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, lastna masa: 2.400 kg, največja dovoljena obremenitev: 6.200 kg, skupna masa: 8.600 kg, konfiguracija osi: 2 osi, prva registracija: 12/1979, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.320 mm, višina nakladalnega prostora: 1.900 mm, vzmetenje: jeklo, velikost pnevmatike: 8,25R20, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, 2 axles, tandem, leaf suspension, tarpaulin, underrun protection, front support, swinging tailgates Body: flatbed trailer with tarpaulin. Advertising has been obscured! Nedpfoi Rp Iuex Akxolh ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 10.970 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - LKW tandem trostrani kiper - Nosivost serijski cca: 11.050 kg - Povećanje ukupne dozvoljene mase na 14,4 t kod guma 285/70R19.5 - Unutrašnje dimenzije: 5.000 x 2.420 x 500 mm - Visina poda pod opterećenjem: 1.040 mm - 1 šasija sa zaštitom od podletanja, vruće pocinkovana - Lakiranje: osovine sa oprugama, vazdušni rezervoari itd. u crnoj boji Nlodpfx Akoxmwiysxoh - 3 para upuštenih i preklopnih veznih kuka u čeličnom podu, LC 3.000 daN - ABS 2S/2M, 24 volti - 2 podizne opruge za čelične bočne stranice visine 500 mm - 1 centralno zaključavanje levo i desno, njihajuće kod nepreklopnih bočnih stranica Dodatna oprema: 1 par UVV veznih prstenova upuštenih u čelični pod, umesto na čelični pod 1 čelični pod od Hardoxa 450, debljine 4 mm Podešavanje visine vučne ruke preko ugaonog prenosa sa ručnim pogonom umesto serijskog 1 par alu rampi bez ivica (8,0 t/par), 3.500 x 400 x 105 mm pogodno za pneumaticima i guseničarima Kutija za alat

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) Nlodpfx Ael Thxdokxsh * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty Nlsdpfxjl Th Ado Akxeh * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (trailing axle lock for maneuvering purposes—no truck-side installation—assigned to PIN 10 in the 15-pin connector, for shunting purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at head plate) * Mechanical support windlass at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear * Toolboxes made of galvanized sheet steel—black powder-coated—approx. 650 x 300 x 600 mm on the right side Nsdpfxjr Dpz Ae Akxelh * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the access ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon with holder and installation * 2 x LED reversing lamps at the rear of the vehicle (controlled by reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm steel front wall plug-in * Perforated outer frame approx. 45-degree angled with provisions for 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in the front and end cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically laterally adjustable * 4-way hydraulic control block for possible retrofit of hydraulic ramp lateral adjustment * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and front support windlass painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of more than 40 ltr up to 120 ltr/min) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable Nodpfx Aol Th I Askxolh * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: Nedov D Tbdspfx Akxelh * Air suspension with lift and lower function ----Drawbar / Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar shortened by approx. 200 mm to about 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (actuated via reverse gear) * 1 removable LED beacon incl. bracket at the rear * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External fold-down supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm – laterally, 5 x 3 t UVV-compliant lashing rings installed per side * At the front and rear corners 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front wall and end cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment under the loading area, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear support elements hot-dip galvanized--- * Axles, air tank, front landing leg, and flange towing eye painted in black ----Other information: * Brand-new vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 39/2026

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Nlodpj Aawfrsfx Akxjh