Prikolica z nizko platformo

MÜLLER-MITTELTAL 3- Achs 30 to. Tieflader verz. hydr. Rampe NEU

Stanje: novo, največja dovoljena obremenitev: 24.020 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11t Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame Kjdpfjl Th I Ajx Ab Uefa * Mechanically adjustable warning board sets at front and rear * Front: closed plastic mudguards; Rear: straight, galvanized sheet steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Tool box made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box within the turntable platform * Multi-voltage wiring * LED tail lights * Rear warning beacon (detachable) * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets per side (stakes not included), also usable as lash points * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame; corner rings: 13.4 t, other rings: 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not at the rear slope) * Widening boards stored at the center of the load floor * One-piece, hot-dip galvanized hydraulic access ramps (approx. 3,000 x 720 mm), manually adjustable sideways * 4-way valve block for hydraulic side ramp retrofit * Platform above turntable: approx. 1,960 x 2,520 mm * Unladen platform height: approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen platform height: approx. 910 mm (incl. 860 mm drive-on angle) * Chassis, turntable, drawbar, and access ramps hot-dip galvanized * Axles, springs, air tanks, and related components painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Permissible total technical weight: 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: novo, lastna masa: 3.780 kg, največja dovoljena obremenitev: 10.620 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, vzmetenje: jeklo, velikost pnevmatike: 215 /75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 215 /75 R 17,5, velikost zadnje pnevmatike: 215/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 400 mm side walls, chassis: hot-dip galvanized, wooden floor, 10 lashing rings, 2 ramps (2,500 mm x 500 mm), ramps with spring assist, twin tires: 8x 215/75 R 17.5, gearbox support winch with load and fast gear, front, 2 folding supports, rear, loading height loaded approx. 850 mm. -- Printing errors, mistakes, and changes excepted, sample images -- More data at: !, More details: ! Kfodsxvcp Djpfx Ab Uoa

Stanje: rabljeno, moč: 123 kW (167,23 KM), Leto izdelave: 2019, obratovalne ure: 3.900 h, Gebrauchte Komatsu PW180-11 Mobilbagger – 2019 – CE-zertifiziert | Zum Verkauf bei BIG Machinery Dieser Komatsu PW180-11 Mobilbagger steht jetzt bei BIG Machinery in den Niederlanden zum Verkauf. Baujahr 2019, mit nur 3.900 Betriebsstunden und in ausgezeichnetem Zustand. Die Maschine ist CE-zertifiziert, EPA-gekennzeichnet und ausgestattet mit Tieflöffel mit Zähnen, Planierschild sowie Hammerleitungen – ideal für Bauwesen, Straßenbau und Erdbewegungsarbeiten. - Zustand: ausgezeichnet gebraucht - Baujahr: 2019 - Betriebsstunden: 3.900 - Gewicht: 18.800 kg - CE-zertifiziert / EPA-gekennzeichnet - Hammerleitungen - Planierschild - Löffel mit Zähnen Interessiert an diesem Komatsu PW180-11? Kontaktieren Sie BIG Machinery für weitere Informationen, Besichtigungstermine oder ein Angebot. Wir liefern weltweit und können vollständige Exportdokumentation sowie den Transport ab unserem Hauptsitz in den Niederlanden organisieren. Warum BIG Machinery wählen? Bei BIG Machinery profitieren Sie von über 30 Jahren Erfahrung im Handel mit neuen und gebrauchten Maschinen. Mit unserem Hauptsitz in den Niederlanden, einem engagierten Team und umfassender Expertise im Seetransport sorgen wir für eine zuverlässige und schnelle Lieferung weltweit. Kjdpfswfcwpjx Ab Uefa Wir überzeugen durch wettbewerbsfähige Preise, sorgfältig ausgewählte Maschinenqualität und das Versprechen einer langfristigen Partnerschaft. Qualität, Schnelligkeit und Zuverlässigkeit – Kaufen Sie BIG! = Weitere Informationen = Antrieb: Rad Leergewicht: 18.800 kg CE-Kennzeichnung: ja Seriennummer: KMTPW035CKHH75159

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) Ksdpfol Tpwysx Ab Uofa * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Pressure gauge for determining load weight (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, both with splash protection * Reflective contour marking tape on the sides and rear * Foldable toolbox lid (hot-dip galvanized) on the turntable platform * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 2 x 7-pin electrical connectors * 4 stake pockets per side, each offering 2 t lashing capacity * Load securing package including: 2 lashing eyelets (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant adjustable and folding lashing rings, loadable in all directions and recessed into the outer frame – corner capacity 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (except rear angle) * Broadening planks stored in the middle of the loading platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, folding widenings & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Celková dolžina nakladalne površine pribl.: 8.800 mm, poglobljeno ležišče pribl.: 6.600 mm, nakladalna višina obremenjena pribl.: 890 mm, 24 x pritrditvena ušesa po 10 t, 12 x žeplji za zaboje v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 750 mm), protidrsna letvica na zunanji strani ramp in zadnjega naklona, rampe nastavljive vstran, lesena tla debeline 68 mm, skladiščna škatla s pokrovom za pritrditvene verige ali napenjalne pasove, označevanje obrisa v skladu s predpisi, rotacijska opozorilna luč, vozilo vroče pocinkano s potopno kopeljo, vključno z indikatorji osi, Doplačilo za: opozorilne table z osvetlitvijo in rotacijsko lučjo, razširitev na 3 m z lesom, cena: 500 €; hidravlično pomikanje ramp, cena: 1.000 €; izrez za bagersko roko, cena: 1.000 € neto. --- Tiskovne napake, napake in spremembe pridržane, vzorčne slike -- Več podatkov pod: !, Več informacij: ! Kodpfx Aboxp Nk Uj Uefa