Priklopnik z delovno ploščadjo

MÜLLER-MITTELTAL 3- Achs 30 to. Tieflader verz. hydr. Rampe NEU

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 Lhodjl Th Nnepfx Ap Djh ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 2.500 kg, največja dovoljena obremenitev: 3.000 kg, lastna masa: 3.000 kg, širina tovornega prostora: 3.000 mm, dolžina tovornega prostora: 7.000 mm, višina nakladalnega prostora: 2.500 mm, številka stroja/vozila: Wohncontainer, Sun Container GmbH | Office Container | Living Container | Site Container | Model FOREST | 240cm x 600cm | High-Quality and Flexible Solution Available units can be viewed in our warehouse and collected directly. Our office and living containers offer an excellent solution for a wide range of applications. They stand out due to their outstanding quality, maximum flexibility, and short delivery times. Technical Specifications: Dimensions: • Length: 300 cm • Width: 700 cm • Height: 250 cm • Weight: 1950 kg Insulation: • Facade cladding with wood-look slats • Ceiling/Walls: 5 cm PUR (polyurethane) • Extra robust and special chassis floor frame • 2 mm thick galvanized steel sheet • Mineral wool insulation between panes • Optional: 10 cm insulation available with PUR, PIR, or mineral wool • Floor: 16 mm fiber cement board • PVC covering Features: • 1x Room • 1x Front facade with floor-to-ceiling fixed glazing • 2x Sliding windows • 1x Double-leaf glass door • 1x Facade cladding with wood-look slats • Premium window and glazing systems from REHAU for optimal thermal insulation and durability Colors: • RAL7016 & facade cladding with wood-look slats High-quality workmanship for long-term use Stock & Delivery: • In-stock items: Shipping on the same day Lhodpjwycdljfx Ap Doh • Out of stock: Production time depending on model 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom dimensions: Products can be manufactured according to the customer's specific requirements. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or customized solutions, please do not hesitate to contact us!

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers Ljdpfx Aotplv Tsp Dohh ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, lastna masa: 9.650 kg, največja dovoljena obremenitev: 30.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => ANTI-SLIP STRIPS ON THE REAR INCLINE OF THE RAMPS => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR SECTION => LONG ONE-PIECE LOADING RAMPS => LOW APPROACH ANGLE Perm. gross vehicle weight 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized in immersion bath Bogie frame hot-dip galvanized in immersion bath Loading ramps hot-dip galvanized in immersion bath Air suspension SAF axles with drum brakes EBS electronic braking system Tyres 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Trough for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear section of lowbed 4 pairs of 10 t recessed lashing rings in lowbed 2 pairs of 10 t recessed lashing rings in highbed 4 pairs of 3 t lashing points in external frame of lowbed 3 pairs of 6 t lashing eyes on external frame 4 pairs of stake pockets in outer highbed frame 4 pairs of stake pockets in outer lowbed frame 3-metre widening package with folding outriggers, without slope 4 warning signs with lighting Rotating warning beacon at rear LARGE STEEL TOOLBOX under cargo bed 2 storage compartments with folding covers in high platform Hydraulic ramp lifters 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for cargo bed and ramps Lhodpfxjhvxgzj Ap Djh 40,000 kg GVWR only with exemption permit according to §70 => Freight costs for delivery: €2.90 plus VAT per km => Prices ex D-86368 – Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex D-86368 – Gersthofen* *Sale to business customers only!* *Images may differ and are for rough orientation only => images may show/contain accessories subject to extra charge*

Stanje: kot nova (razstavni stroj), lastna masa: 10.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 4x2, dolžina tovornega prostora: 9.220 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible total weight special approval: 40,000 kg Payload special approval: approx. 30,000 kg Low bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical overall weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low bed Suspension Air suspension unit including raising and lowering effective on the rear axle unit Braking system Braking system according to EC directives with EBS 4S/3M in multivoltage version (12-24V), spring-loaded parking brake incl. 2 external test connections for brakes/modulator and bellows pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball race turntable Towing device Cranked drawbar with towing eye Ø 50mm, low-maintenance silent bushings including height adjustment for drawbar Frame Robust welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (top length approx. 2,500 mm - depth approx. 410 mm) and at the rear (top length approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers; Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with wheelbase 2,010 mm, front corners chamfered, rear climbing bars on the incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame high bed 1 pair of stake pockets (90x50 mm) in the outer frame low bed Floor 50 mm softwood planking (painted/impregnated) Ramps One-piece hot-dip galvanised loading ramps (3,150 mm x 750 mm) with 50 mm softwood planking (painted/impregnated), laterally adjustable, directly acting upright spring lifters for effortless operation Finishing Chassis frame hot-dip galvanised in immersion bath Support 2 folding supports at the rear left and right at the vehicle rear Equipment Folding side underrun protection, Lhsdpfx Ajiciutep Djh front semicircular plastic mudguards – rear straight steel mudguards with antispray, 2 wheel chocks with holders; contour markings in accordance with ECE Directive R48 Front wheel recess cover with 3 pairs of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00888 Hardwood planking for front wheel recess cover Rear wheel recess cover with 1 pair of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00897 Hardwood planking for rear wheel recess cover 3 pairs of screwed lashing rings 6 t 3 m equipment package without incline B=11,200 Folding extension with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning boards 4-fold, electrics and revolving beacon 1 pair of storage compartments for wooden boards 3 m package (2 pieces moun

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Ljdpfx Apon Aw Hkj Djhh Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: Lhsdjl Th Duspfx Ap Djh * Jost mechanical landing gear in front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm Ljdpfx Apjx Nli No Dohh * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 6,300kg Payload: 17,700kg / 23,700kg Overall length: 10,900mm Loading length: total 8,600mm; 6,500mm including rear bevel; 2,100mm gooseneck Width: 2,550mm Loading height: 900mm Further information: - Heavy-duty welded construction made from high-strength fine grain steel - Hot-dip galvanized - Rear support - Twin wheels 235/75R17.5 - Warning panels - LED reversing lights - Lashing points on outer frame - Lashing rings: 4x gooseneck, 6x low bed (10,000 daN) - Single-piece hot-dip galvanized loading ramps (3,100mm x 750mm), 50mm softwood decking, laterally adjustable - Storage box in gooseneck Lsdowrv Saopfx Ap Dohh - Plastic toolbox - Bumper - Floor with 50mm softwood decking - Climbing strips on rear loading gradient

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders Ljdpfx Ajq Dyvcop Djhh * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer with pressure sensors for display of total axle load per axle group * Side underrun protection * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel panels, each with spray protection * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm (black powder-coated) mounted on right side * 15-pin power connector * LED lighting 12/24 V * LED revolving beacon (removable), rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (no installation required on the truck) * Rubber covering on the folding ramps as well as on the inclined ramp surface, left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from front to rear cross beam * Hardwood flooring on the walking surfaces of the low bed platform * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package comprising 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions, recessed into the outer frame – in corners 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear incline) * Plank holder under the cargo area, lengthwise * Roller stop in front of the front cross member, raised, with one 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic side ramp displacement * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof * Dual-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm ramped section) * Loaded platform height: approx. 890 mm +/- 20 mm with air suspension * Chassis, turntable, roller stop, folding extensions & ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer warranty * Subject to prior sale and errors * Immediately available ex Egestorf