Priklopnik z delovno ploščadjo

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Nwsdpfox Nlkasx Aiqek ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, skupna masa: 1.350 kg, konfiguracija osi: 1 os, vzmetenje: drugo, Leto izdelave: 2026, Oprema: spojka prikolice, - Bagela KW 3000 Cable Pulling Winch - 3800 x 1600 x 1300 mm - Straight Drawbar - Cable winch mounted on single-axle chassis - Approved for 100 km/h road speed - Operation via touchscreen - Printer - 500 meters of steel cable, D = 10 mm - Infinitely variable pulling speed - Max. 60 meters per minute - Maximum pulling force 30 kN - Stabilization with two individually extendable and lowerable outriggers - Freight costs: 1,380 EUR + VAT - Many optional extras available on request, e.g., 1,000-meter cable + €1,590 - Swivel head pulley with pivot joint Njdpfx Aeikp Aboiqswk - Pulley holder - Remote control for forward – stop – reverse / radio remote control, etc. Please contact us if you need any additional details - Phone

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function Nedpfxjx Nlkgs Aiqswk ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, vzmetenje: drugo, Oprema: spojka prikolice, Bagela KW 5010 vlečna vitla za kable Dolžina = 4800 mm, Širina = 1600 mm, Višina = 1450 mm Teža 1450 kg Tandemska os, zavirana Nastavljiva vlečna kljuka po višini Zaključeno ohišje iz plastike 4-cilindrski motor, LDW 10, 23 kW, dizel Hidravlični pogon 1000 metrov jeklenice, premer = 12 mm Maksimalna vlečna sila 50 kN Vlečna hitrost 30 m/min. Zaščita pred sukanjem z zaustavitvijo kabla Upravljanje preko zaslona na dotik Termalni tiskalnik Vlečna hitrost nastavljiva brezstopenjsko preko proporcionalnega ventila Zadaj 2 izvlečna podporna stojala Številne dodatne možnosti, na povpraševanje Stroški prevoza in dokumentacije: 1.380,00 EUR Nsdpfjiv D Rvsx Aiqswk

Stanje: rabljeno, lastna masa: 1.750 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 3.000 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 1.600 mm, višina nakladalnega prostora: 1.500 mm, barva: bela, Leto izdelave: 2020, Oprema: spojka prikolice, Rental prices (net, plus VAT): 1 day: €295 1 week: €1,060 1 month: €2,800 Maximum operating hours: 1 day: 8 operating hours max 1 week: 40 operating hours max Nwedpjin Ia Hjfx Aiqsk 1 month: 176 operating hours max For sales and rental inquiries, I am happy to assist you. Doll Fahrzeugbau oHG Return/Cleaning Conditions: The machine should be returned fully refueled. If refueled by us, we charge €2.30 per liter. Inspection and check of the machine and cable will be charged at €80. Technical Data: Cable Pulling Winch KW 3000 / Diesel Engine, Metal Housing Specifications: - Max. pulling force: 3000 daN - Pulling speed: 0–60 m/min, steplessly adjustable (depending on load) - Usable cable length: 1000 m - Cable diameter: 10 mm - Engine: 4-cylinder diesel, 16.5 kW, electric start, water cooling - Fuel reserve warning light - Transmission: hydrostatic power transmission - Pulling force and cable length measurement: programmable digital display, chart recorder - Shut-off contact: via solenoid valve in hydraulic circuit - Control: electric with prop control - Lockable housing - Housing sound insulation: 78 dBA - Chassis: sprung single-axle chassis, 1800 kg, height-adjustable drawbar with overrun and parking brake, ball hitch, 100 km/h - Support tensioning device with lever - Dimensions (LxWxH): 3800 x 1650 x 1300 mm - Weight: 1800 kg - Paint finish: white - Remote control with 100 m cable - Swivel (anti-twist) device

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection Nodpfx Aiotplv Tjqjwk * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, lastna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.250 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 1.420 mm, vzmetenje: drugo, barva: modra, Leto izdelave: 2024, Oprema: je imel nesrečo, spojka prikolice, Thaler Cable Winch KE-SP 2030 - Pulling force 3000 daN - Single-axle chassis with straight drawbar - Electronic measuring device TM 3000 with USB interface and stick - 3-cylinder diesel engine 15.4 kW, Stage V - Protective cover made of steel plate, lockable - Loading frame with crane eye - Drum with 500 m cable, 9.5 mm thick - Swivel catcher D = 28 mm, firmly pressed onto the cable - Many optional extras available, for example: - Paint finish, color according to RAL chart - Cable length 1000 meters - Height-adjustable drawbar - Electronic measuring device TM 3001 (enables direct input via app, smartphone/tablet if required) Nsdomx Uhxjpfx Aiqswk - Petrol engine instead of diesel engine - Printer for the electronic measuring device - Dead-man’s switch - Radio remote control - Three-phase motor 18 kW instead of diesel engine - Adjustable rear work spotlight - If you have any further questions, feel free to call us. - Freight and document costs €1,100

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: Nwodpfxol Th I As Aiqsk * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 16.200 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2017, naslednji pregled (TÜV): 03/2027, skupna širina: 2.540 mm, skupna višina: 900 mm, Leto izdelave: 2017, Informacije v nemščini: Dodatne informacije: * Dolžina: 7630 mm * Tip | Prva os: Continental R * Velikost pnevmatike | Prva os: 245/70 R17.5 * Globina profila pnevmatike zunanja leva stran | Prva os: 50 % * Globina profila pnevmatike notranja leva stran | Prva os: 50 % Nsdezm D Upepfx Aiqswk * Globina profila pnevmatike zunanja desna stran | Prva os: 50 % * Globina profila pnevmatike notranja desna stran | Prva os: 50 % * Največja obremenitev osi | Prva os: 9000 kg * Tip | Druga os: Continental R * Velikost pnevmatike | Druga os: 245/70 R17.5 * Globina profila pnevmatike notranja leva stran | Druga os: 50 % * Globina profila pnevmatike zunanja desna stran | Druga os: 50 % * Globina profila pnevmatike notranja desna stran | Druga os: 50 % * Največja obremenitev osi | Druga os: 9000 kg * Medosna razdalja: 536 cm * Cena na zahtevo: Da * Položaj | Prva os: Sredina * Znamka | Prva os: Druga * Vrsta zavore | Prva os: Bobnaste zavore * Vzmetenje | Prva os: Zračno vzmetenje * Dvojna kolesa | Prva os: Da * Položaj | Druga os: Sredina * Znamka | Druga os: Druga * Vrsta zavore | Druga os: Bobnaste zavore * Vzmetenje | Druga os: Zračno vzmetenje * Dvojna kolesa | Druga os: Da Semtrade B.V. Kontakt | Martin Klaaijsen | Tel: | Whatsapp: | E-pošta: Stroški izvoza | Predhodno se obrnite na nas za informacije o stroških in postopkih za vašo državo. Lokacija | Maasdijk (NL) | 140 km od meje z Nemčijo | Letališče Rotterdam The Hague, 20 km Omejitev odgovornosti: Pridržane spremembe, medprodaja in napake. ----Informacije v angleščini: Dodatne informacije: * Dolžina vozila: 7630 mm * Tip | Prva os: Continental R * Velikost pnevmatike | Prva os: 245/70 R17.5 * Globina profila pnevmatike zunanja leva stran | Prva os: 50 % * Globina profila pnevmatike notranja leva stran | Prva os: 50 % * Globina profila pnevmatike zunanja desna stran | Prva os: 50 % * Globina profila pnevmatike notranja desna stran | Prva os: 50 % * Največja obremenitev | Prva os: 9000 kg * Tip | Druga os: Continental R * Velikost pnevmatike | Druga os: 245/70 R17.5 * Globina profila pnevmatike notranja leva stran | Druga os: 50 % * Globina profila pnevmatike zunanja desna stran | Druga os: 50 % * Globina profila pnevmatike notranja desna stran | Druga os: 50 % * Največja obremenitev | Druga os: 9000 kg * Medosna razdalja: 536 cm * Cena na zahtevo: Da * Položaj | Prva os: Sredina * Znamka | Prva os: Druga * Vrsta zavore | Prva os: Bobnaste zavore * Vzmetenje | Prva os: Zračno vzmetenje * Dvojna kolesa | Prva os: Da * Položaj | Druga os: Sredina * Znamka | Druga os: Druga * Vrsta zavore | Druga os: Bobnaste zavore * Vzmetenje | Druga os: Zračno vzmetenje * Dvojna kolesa | Druga os: Da Semtrade B.V. Kontakt | Martin Klaaijsen | Tel: | Whatsapp: | E-pošta: Stroški izvoza | Obrnite se na nas za cene za vašo državo. Lokacija | Maasdijk (NL) | 140 km od nemške meje | Letališče Rotterdam The Hague, 20 km Omejitev odgovornosti: Cene in razpoložljivost se lahko spremenijo brez predhodnega obvestila. ---- Navedene cene ne vključujejo davka BPM in veljajo samo za izvoz.