Prikolica

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Stanje: novo, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: Lodpfxex Nlkge Ab Ueta * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinder * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display integration via EBS signal — no truck-side installation required * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, perforated for lashings, lashing capacity per point 2,000 kg with 480 mm spacing * Option to install 3,000 kg drop lashing brackets at approx. 600 mm intervals — delivery includes 12 lateral 3,000 kg lashing brackets per side * 5 pockets per side for stanchions 100 x 50 mm integrated in the outer frame — stanchions not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 hot-dip galvanized cable drum supports, secured via container locks with lateral forklift pockets, 800 mm center-to-center (pocket width 185 mm) * Maximum drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Each drum support rated for 6,000 kg drum weight * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotatable ends * 2 locating rings * 2 centering cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVWR possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 Cable Drum Supports ----Brake System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering device ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck dashboard via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting Ltodjx Nli Nspfx Ab Uja ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix external frame bent at 45° with perforated pattern for load securing equipment, lashing capacity per lashing point 2,000 kg at intervals of 480 mm * Installation of 3,000 kg folding lashing brackets possible at intervals of approx. 600 mm—delivery includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side for tube stanchions 100 x 50 mm in the outer frame (stanchions not included in delivery) * 30 mm phenolic resin-coated plywood floor ----Cable Drum Stands: * 3 pcs. galvanized cable drum stands secured via container locks, with side forklift pockets midpoint/midpoint 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm, max. drum width 1,650 mm * Clear width between supporting arms approx. 1,775 mm, with cross brace * Max. drum weight per stand: 6,000 kg * Without drive and drum brake * Support arm features clamping lock for securing the drum spindle * Steel drum spindle, 76 mm diameter, with centering and rotating ends * 2 set collars * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on supporting arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Painting: * Chassis, bogie, drawbar, outer frame, rear underrun protection: hot-dip galvanized * Axles painted in black tone ----Notes: * Technical possibility to upgrade to 30 t gross vehicle weight * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex works Egestorf