Prikolica

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: Pjdpfex Nli Nex Ab Dsgt * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, skupna masa: 1.350 kg, konfiguracija osi: 1 os, vzmetenje: drugo, Leto izdelave: 2026, Oprema: spojka prikolice, - Bagela KW 3000 Cable Pulling Winch - 3800 x 1600 x 1300 mm - Straight Drawbar - Cable winch mounted on single-axle chassis - Approved for 100 km/h road speed - Operation via touchscreen - Printer - 500 meters of steel cable, D = 10 mm Pjdpfx Ajikp Abob Dsgt - Infinitely variable pulling speed - Max. 60 meters per minute - Maximum pulling force 30 kN - Stabilization with two individually extendable and lowerable outriggers - Freight costs: 1,380 EUR + VAT - Many optional extras available on request, e.g., 1,000-meter cable + €1,590 - Swivel head pulley with pivot joint - Pulley holder - Remote control for forward – stop – reverse / radio remote control, etc. Please contact us if you need any additional details - Phone

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards Pgodpfx Aox Nlkasb Djt * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, vzmetenje: drugo, Oprema: spojka prikolice, Bagela KW 5010 vlečna vitla za kable Pgedpjiv D Rvsfx Ab Dot Dolžina = 4800 mm, Širina = 1600 mm, Višina = 1450 mm Teža 1450 kg Tandemska os, zavirana Nastavljiva vlečna kljuka po višini Zaključeno ohišje iz plastike 4-cilindrski motor, LDW 10, 23 kW, dizel Hidravlični pogon 1000 metrov jeklenice, premer = 12 mm Maksimalna vlečna sila 50 kN Vlečna hitrost 30 m/min. Zaščita pred sukanjem z zaustavitvijo kabla Upravljanje preko zaslona na dotik Termalni tiskalnik Vlečna hitrost nastavljiva brezstopenjsko preko proporcionalnega ventila Zadaj 2 izvlečna podporna stojala Številne dodatne možnosti, na povpraševanje Stroški prevoza in dokumentacije: 1.380,00 EUR

Stanje: rabljeno, lastna masa: 1.750 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 3.000 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 1.600 mm, višina nakladalnega prostora: 1.500 mm, barva: bela, Leto izdelave: 2020, Oprema: spojka prikolice, Rental prices (net, plus VAT): 1 day: €295 1 week: €1,060 1 month: €2,800 Maximum operating hours: 1 day: 8 operating hours max 1 week: 40 operating hours max 1 month: 176 operating hours max For sales and rental inquiries, I am happy to assist you. Doll Fahrzeugbau oHG Return/Cleaning Conditions: The machine should be returned fully refueled. If refueled by us, we charge €2.30 per liter. Inspection and check of the machine and cable will be charged at €80. Technical Data: Cable Pulling Winch KW 3000 / Diesel Engine, Metal Housing Specifications: - Max. pulling force: 3000 daN - Pulling speed: 0–60 m/min, steplessly adjustable (depending on load) Pgjdpfjin Ia Hex Ab Djt - Usable cable length: 1000 m - Cable diameter: 10 mm - Engine: 4-cylinder diesel, 16.5 kW, electric start, water cooling - Fuel reserve warning light - Transmission: hydrostatic power transmission - Pulling force and cable length measurement: programmable digital display, chart recorder - Shut-off contact: via solenoid valve in hydraulic circuit - Control: electric with prop control - Lockable housing - Housing sound insulation: 78 dBA - Chassis: sprung single-axle chassis, 1800 kg, height-adjustable drawbar with overrun and parking brake, ball hitch, 100 km/h - Support tensioning device with lever - Dimensions (LxWxH): 3800 x 1650 x 1300 mm - Weight: 1800 kg - Paint finish: white - Remote control with 100 m cable - Swivel (anti-twist) device

Stanje: novo, lastna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.250 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 1.420 mm, vzmetenje: drugo, barva: modra, Leto izdelave: 2024, Oprema: je imel nesrečo, spojka prikolice, Thaler Cable Winch KE-SP 2030 - Pulling force 3000 daN - Single-axle chassis with straight drawbar - Electronic measuring device TM 3000 with USB interface and stick - 3-cylinder diesel engine 15.4 kW, Stage V - Protective cover made of steel plate, lockable - Loading frame with crane eye - Drum with 500 m cable, 9.5 mm thick Pgsdemx Uhxjpfx Ab Dot - Swivel catcher D = 28 mm, firmly pressed onto the cable - Many optional extras available, for example: - Paint finish, color according to RAL chart - Cable length 1000 meters - Height-adjustable drawbar - Electronic measuring device TM 3001 (enables direct input via app, smartphone/tablet if required) - Petrol engine instead of diesel engine - Printer for the electronic measuring device - Dead-man’s switch - Radio remote control - Three-phase motor 18 kW instead of diesel engine - Adjustable rear work spotlight - If you have any further questions, feel free to call us. - Freight and document costs €1,100