Prikolica z nizko platformo

MÜLLER-MITTELTAL 2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: Hfsdpol Th Htefx Ag Ijg * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 2.500 kg, največja dovoljena obremenitev: 3.000 kg, lastna masa: 3.000 kg, širina tovornega prostora: 3.000 mm, dolžina tovornega prostora: 7.000 mm, višina nakladalnega prostora: 2.500 mm, številka stroja/vozila: Wohncontainer, Sun Container GmbH | Office Container | Living Container | Site Container | Model FOREST | 240cm x 600cm | High-Quality and Flexible Solution Available units can be viewed in our warehouse and collected directly. Our office and living containers offer an excellent solution for a wide range of applications. They stand out due to their outstanding quality, maximum flexibility, and short delivery times. Technical Specifications: Dimensions: • Length: 300 cm • Width: 700 cm • Height: 250 cm • Weight: 1950 kg Insulation: • Facade cladding with wood-look slats • Ceiling/Walls: 5 cm PUR (polyurethane) • Extra robust and special chassis floor frame • 2 mm thick galvanized steel sheet • Mineral wool insulation between panes • Optional: 10 cm insulation available with PUR, PIR, or mineral wool • Floor: 16 mm fiber cement board • PVC covering Features: • 1x Room • 1x Front facade with floor-to-ceiling fixed glazing • 2x Sliding windows Hfsdpfx Agjwycdlj Isg • 1x Double-leaf glass door • 1x Facade cladding with wood-look slats • Premium window and glazing systems from REHAU for optimal thermal insulation and durability Colors: • RAL7016 & facade cladding with wood-look slats High-quality workmanship for long-term use Stock & Delivery: • In-stock items: Shipping on the same day • Out of stock: Production time depending on model 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom dimensions: Products can be manufactured according to the customer's specific requirements. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or customized solutions, please do not hesitate to contact us!

Stanje: novo, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.035 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 1.475 mm, Leto izdelave: 2026, Oprema: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of manufacture: 2026 * GVW: 10,500 kg * Payload: 7,500 kg * Unladen weight: 3,000 kg * Overall dimensions: 6960 x 2550 x 1475 mm * Deck dimensions: 5035 x 2420 x 500 mm * Steel drop sides: 500 mm high * Infinitely height-adjustable drawbar Hodpfoqnrtaox Ag Iofg * 10 recessed lashing rings * 2 rear supports * Electrical and air brake connections on the drawbar * Ramp storage compartment with 2 aluminium loading ramps integrated into the chassis frame * 8 t loading ramps available for an extra charge of €1,499 IMPORTANT NOTICE! PLEASE READ CAREFULLY! We expressly reserve the right of prior sale, as this item is also being offered on other platforms. We strongly recommend an inspection and check to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and checks can be arranged at any time by appointment and are expressly encouraged! Images are similar and may show optional equipment subject to an extra charge. Specified internal dimensions are approximate. TRADE-IN POSSIBLE FOR ALMOST ANYTHING!! EXCHANGE DEALS AND TRADE-UPS POSSIBLE!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 5.600 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.030 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.200 mm, skupna višina: 1.400 mm, Leto izdelave: 2026, * Humbaur HTK 754020 * Three-way tipper * New vehicle * Tandem chassis * Year of manufacture: 2025 * Gross weight: 7,500 kg * Unladen weight: 1,900 kg * Payload: 5,600 kg * Overall dimensions: 6,040 mm x 2,200 mm x 1,400 mm * Internal dimensions: 4,000 mm x 2,030 mm x 400 mm * Loading height: 920 mm * Steel side and rear drop-down/removable sidewalls Hjdpfxjttfm Ho Ag Iofg * Rear drop side swinging with central locking * Height-adjustable drawbar approx. 590 mm - 930 mm * Torsion bar axles and parabolic suspension * Integrated storage channel for loading ramps * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4 mm steel plate * 3 pairs of recessed lashing points * Air brake system with ALB / ABS ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend an inspection and evaluation to avoid any misconceptions about the condition and suitability of the vehicle. Viewings and inspections are possible at any time by appointment and are expressly encouraged! Images are for reference only; may include optional accessories at extra cost. All internal dimensions are approximate. For new vehicles, additional charges may apply for transport and documentation. TRADE-INS ACCEPTED FOR ALMOST EVERYTHING! PART EXCHANGE AND TRADE-UPS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 AM to 5:00 PM, Saturday 8:30 AM to 2:00 PM Over 500 new and used trailers constantly in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, številka stroja/vozila: ebf3f771e96394cd89e56bbb7, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Central-axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes screwed into the floor/external frame, each rated at 5 tons 2 additional pairs of lashing eyes screwed into the floor, each rated at 5 tons, in the corners Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter-shell fenders 1 plastic toolbox with shelf, dimensions 620mm (w) / 360mm (h) / 440mm (d), lockable with a padlock (padlock not included) Central-axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235/75 R 17.5 Hfsdoi Rixrjpfx Ag Ieg Manufacturer’s choice Steel rims, factory silver Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/Tread plate floor for high point load capacity Note: Minor floor waviness possible due to welding distortions! Platform length approx. 5,200 mm Rear slope approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, height 400 mm Sideboards 25 mm aluminum hollow profile, height 400 mm, foldable and removable Rear wall / rear corner posts 1 pair of steel posts attached to the frame with bracket for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Covered with 3 toothed steel rails With gas pressure springs for single-person operation Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Front wall: aluminum Sideboards: anodized aluminum Loading ramps: hot-dip galvanized Attention! These are archive images.

Stanje: novo, lastna masa: 9.650 kg, največja dovoljena obremenitev: 30.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => ANTI-SLIP STRIPS ON THE REAR INCLINE OF THE RAMPS => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR SECTION => LONG ONE-PIECE LOADING RAMPS => LOW APPROACH ANGLE Perm. gross vehicle weight 40,000 kg Hfodpfxjhvxgzj Ag Ijg Payload approx. 30,350 kg Chassis frame hot-dip galvanized in immersion bath Bogie frame hot-dip galvanized in immersion bath Loading ramps hot-dip galvanized in immersion bath Air suspension SAF axles with drum brakes EBS electronic braking system Tyres 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Trough for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear section of lowbed 4 pairs of 10 t recessed lashing rings in lowbed 2 pairs of 10 t recessed lashing rings in highbed 4 pairs of 3 t lashing points in external frame of lowbed 3 pairs of 6 t lashing eyes on external frame 4 pairs of stake pockets in outer highbed frame 4 pairs of stake pockets in outer lowbed frame 3-metre widening package with folding outriggers, without slope 4 warning signs with lighting Rotating warning beacon at rear LARGE STEEL TOOLBOX under cargo bed 2 storage compartments with folding covers in high platform Hydraulic ramp lifters 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for cargo bed and ramps 40,000 kg GVWR only with exemption permit according to §70 => Freight costs for delivery: €2.90 plus VAT per km => Prices ex D-86368 – Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex D-86368 – Gersthofen* *Sale to business customers only!* *Images may differ and are for rough orientation only => images may show/contain accessories subject to extra charge*

Stanje: kot nova (razstavni stroj), lastna masa: 10.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 4x2, dolžina tovornega prostora: 9.220 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible total weight special approval: 40,000 kg Payload special approval: approx. 30,000 kg Low bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical overall weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low bed Suspension Air suspension unit including raising and lowering effective on the rear axle unit Braking system Braking system according to EC directives with EBS 4S/3M in multivoltage version (12-24V), spring-loaded parking brake incl. 2 external test connections for brakes/modulator and bellows pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball race turntable Towing device Cranked drawbar with towing eye Ø 50mm, low-maintenance silent bushings including height adjustment for drawbar Frame Hfjdeiciutspfx Ag Ieg Robust welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (top length approx. 2,500 mm - depth approx. 410 mm) and at the rear (top length approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers; Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with wheelbase 2,010 mm, front corners chamfered, rear climbing bars on the incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame high bed 1 pair of stake pockets (90x50 mm) in the outer frame low bed Floor 50 mm softwood planking (painted/impregnated) Ramps One-piece hot-dip galvanised loading ramps (3,150 mm x 750 mm) with 50 mm softwood planking (painted/impregnated), laterally adjustable, directly acting upright spring lifters for effortless operation Finishing Chassis frame hot-dip galvanised in immersion bath Support 2 folding supports at the rear left and right at the vehicle rear Equipment Folding side underrun protection, front semicircular plastic mudguards – rear straight steel mudguards with antispray, 2 wheel chocks with holders; contour markings in accordance with ECE Directive R48 Front wheel recess cover with 3 pairs of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00888 Hardwood planking for front wheel recess cover Rear wheel recess cover with 1 pair of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00897 Hardwood planking for rear wheel recess cover 3 pairs of screwed lashing rings 6 t 3 m equipment package without incline B=11,200 Folding extension with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning boards 4-fold, electrics and revolving beacon 1 pair of storage compartments for wooden boards 3 m package (2 pieces moun

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Further information Hfsdpfx Agevy Tvts Ieg New: No

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon ===== Hfedpfx Aen Aw Hkjg Ijg

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Hfsdpfxsktm Sus Ag Ieg Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.