Tristrani nagibni priklopnik

HUMBAUR HTK 105024 - Neu - Dreiseitenkipper

Stanje: novo, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.035 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 1.475 mm, Leto izdelave: 2025, Oprema: ABS, * Humbaur Three-Way Tipper * HTK 10 50 24 * Year of manufacture: 2025 * Gross vehicle weight: 10,500 kg * Payload: 7,500 kg * Unladen weight: 3,000 kg * Overall dimensions: 6960 x 2550 x 1475 mm * Loading platform dimensions: 5035 x 2420 x 500 mm * Steel side walls: 500 mm high * Continuously height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electrical and compressed air connections on the drawbar * Storage compartment with 2 aluminium ramps integrated into the chassis frame * 8 t aluminium ramps available for additional €1,499 IMPORTANT!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend an inspection and assessment to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and checks are possible at any time by appointment and are expressly encouraged!!! Images may be similar and might include optional extras subject to additional charges. All stated interior dimensions are approximate. TRADE-INS ACCEPTED FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom location: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Hpjdpoqnrtajfx Abpja Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 5.600 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.030 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.200 mm, skupna višina: 1.400 mm, Leto izdelave: 2025, * Humbaur HTK 754020 * Three-way tipper trailer * New vehicle * Tandem axle * Year of manufacture: 2025 * Gross vehicle weight: 7,500 kg * Unladen weight: 1,900 kg * Payload: 5,600 kg * Overall dimensions: 6,040 mm x 2,200 mm x 1,400 mm * Internal dimensions: 4,000 mm x 2,030 mm x 400 mm * Loading height: 920 mm * Steel side and rear drop sides, foldable and removable * Rear drop side swinging with central locking * Height-adjustable tow bar approx. 590 mm - 930 mm * Torsion suspension and parabolic springs * Integrated shaft for ramp storage * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4 mm steel sheet * 3 pairs of recessed lashing points * Air brake with load-dependent braking (ALB) / anti-lock braking system (ABS) ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to sell the item elsewhere, as it is also offered on other platforms. We strongly recommend an inspection and assessment to avoid any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by prior arrangement and are expressly encouraged!!! Hsdpfxottfm Ho Abpspa Images are for reference only and may include optional, chargeable accessories. The stated internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGES AND EXTRA PAYMENTS POSSIBLE!!! Display location: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, številka stroja/vozila: ebf3f771e96394cd89e56bbb7, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Central-axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes screwed into the floor/external frame, each rated at 5 tons 2 additional pairs of lashing eyes screwed into the floor, each rated at 5 tons, in the corners Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter-shell fenders 1 plastic toolbox with shelf, dimensions 620mm (w) / 360mm (h) / 440mm (d), lockable with a padlock (padlock not included) Central-axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake system Hpodpei Rixrsfx Abpea 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/Tread plate floor for high point load capacity Note: Minor floor waviness possible due to welding distortions! Platform length approx. 5,200 mm Rear slope approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, height 400 mm Sideboards 25 mm aluminum hollow profile, height 400 mm, foldable and removable Rear wall / rear corner posts 1 pair of steel posts attached to the frame with bracket for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Covered with 3 toothed steel rails With gas pressure springs for single-person operation Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Front wall: aluminum Sideboards: anodized aluminum Loading ramps: hot-dip galvanized Attention! These are archive images.

Stanje: novo, lastna masa: 3.150 kg, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR THREE-WAY TIPPER NEW MODEL 2023 (HTK PASS-THROUGH/SMB AXLES) GALA L => INCLUDING PASS-THROUGH DESIGN Hsdpfx Absiciuljpepa => AUTOMATIC REAR FLAP RELEASE => CHASSIS FRAME FULLY HOT-DIP GALVANIZED => PLATFORM FRAME FULLY HOT-DIP GALVANIZED => SIDE WALLS FULLY HOT-DIP GALVANIZED Equipment: Permissible total weight: kg Payload: approx. kg Support load: 500 kg Loading area approx. 5020 x 2420 mm Steel side walls approx. 450 mm high Side wall lifting springs (side walls) Fixed drawbar mounted, non-adjustable Reinforced 25 t gearbox support winch (static) with load and rapid gear 8 recessed 3 t lashing rings in platform floor 2 folding and extendable rear supports (hot-dip galvanized) Dual-circuit ABS compressed air braking system Central locking, side and rear Plastic mudguards with anti-spray system 4x 235/75 R17.5 inch tires 15-pin 24 volt electrical connector for 24 volt lighting 7-pin 24 volt ABS connector Compressed air connections RED and YELLOW Ø 40 mm DIN towing eye Coupling height approx. 800 mm Hydraulic connection: SVK BG3 plug Optional available at extra cost: *Gross vehicle weight increase to kg incl. kg support load = 1,490 EUR net Payload 9,200 kg Stronger brake cylinders and control valves as well as EBS • 2 aluminum ramps with 8 t load capacity, including rail compartment per pair • Surcharge: 2,250 EUR net plus VAT • 1x plastic toolbox • Surcharge: 290 EUR net plus VAT => Delivery freight charges: 2.90 EUR plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale only to business customers!* *Images may differ and are for general reference only => may contain/show accessories available at extra cost*

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Hedpjktm Suefx Abpjpa Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Hpedpfx Absvy Tvtepoa Further information New: No

Stanje: novo, največja dovoljena obremenitev: 9.210 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.050 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, skupna širina: 2.550 mm, skupna višina: 1.500 mm, Leto izdelave: 2025, * Humbaur Three-Way Tipper * HTK 10 50 24 * New Vehicle * Year of Manufacture: 2025 * Gross Vehicle Weight: 11,900 kg * Payload: 9,210 kg * Unladen Weight: 2,960 kg * Overall Dimensions: 7,170 x 2,550 x 1,500 mm * Platform Dimensions: 5,035 x 2,420 x 450 mm * Steel Side Walls: 450 mm high * Tyres: 235/75 R17.5 * Continuously adjustable drawbar * 10 recessed lashing rings * 2 rear support legs * Electrical and pneumatic connections on the drawbar * Recessed compartment with 2 aluminium loading ramps in the chassis frame * 8t loading ramps available at a surcharge of €1,499 * Incl. 19% VAT IMPORTANT !!!!! PLEASE READ !!!!! We explicitly reserve the right of prior sale, as this item is also offered on other platforms. We strongly recommend viewing and inspection to prevent any misconceptions regarding condition and suitability on the buyer’s side. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for reference only and may show optional, surcharge equipment. All internal measurements are approximate indications. TRADE-INS POSSIBLE FOR NEARLY EVERYTHING!!! TRADE-IN AND ADDITIONAL PAYMENTS POSSIBLE!!! Showroom Address: 58285 Gevelsberg, Am Sinnerhoop 17 Hpjdpjuzfm Dofx Abpea Opening hours: Monday–Friday 8.30 am to 5.00 pm, Saturday 8.30 am to 2.00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis Hodpfxjl Th Duo Abpspa * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 11.9 Tandem Low Loader Three-Way Tipping Trailer with Extension Side Walls + Aluminium Ramps * Reference number for inquiry: 11532 - immediately available * NEW VEHICLE in RAL 9016 traffic white * 5m x 2.42m x 0.5m + 0.5m steel extensions * Three side swing panels, painted, side panels laser welded, folding, swingable and removable, painted, with spring assist and central locking (locking system galvanized) * Two-step access in front of the headboard (galvanized) * Lockable compartment under the tipping body for loading ramps * Aluminium ramps, 8t pair, 3.57m long * 2 rear-mounted LED reversing lights * Chassis hot-dip galvanized * 4 UVV lashing rings LC 5000daN at front and rear + 8 recessed and foldable lashing eyes LC 3000daN in the tipper floor (centrally positioned) * Side marker lamps with indicator function * Continuously height-adjustable drawbar, hot-dip galvanized, draw eye 40mm * Wide tires 385/55R 19.5 (quadruple), BPW axles, parabolic springs * LED lighting system for 12 and/or 24 V * Mesh hooks Hpsdpfxownvt Ao Abpsa * EBS with tire pressure monitoring system * We are Müller-Mitteltal authorized dealer ---- Example hire-purchase from our financing partner MMV Leasing: EUR 560 per month net, 60-month term, no down payment, "0" EUR residual value. Other terms with/without down payment/residual value possible. Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available outside of business hours by appointment. We speak German, English, Polish, and French. Whatsapp / Facetime Leasing, financing, and trade-in possible.----

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display capability in the truck via EBS signal, no installation required on truck side * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye * Mechanical support winch at the front * Rear: 2 mechanical foldable supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks on sides and rear, integrated in the central locking bearings, plus 2 units on the front wall * Main frame made of fine-grain steel * Steel pallet 2-way tipper body with fixed smooth sheet front wall, continuous foldable side walls (without center stanchions, with sideboard spring lifters and manual central locking for swinging function) * Removable screw-on rear stanchions * Steel rear wall mounted in front of the ramps * In each corner: 1 x 5 ton lashing point; in each side: 4 x 3 ton lashing rings integrated into the outer frame * 4 mm floor made of fine-grain steel * Two-part mechanical grating loading ramps with aluminum tapered end, 2,150 + 1,300 mm x 600 mm (retractable to 80 mm manually) Hjdpetr St Ujfx Abpopa * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Side boards and platform in pure white, RAL 9010 * Painting of side walls and tipper platform in any RAL color available at additional cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 07/2026