Tristrani nagibni priklopnik

Humbaur 3-Seitenkipper HTK 3000.31 Alu, mit Laubgitteraufsatz, 3140 x 1750 x 350 mm, 3,0 to.

Stanje: rabljeno, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Oprema: garancija za rabljena vozila, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Box dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load area hydraulically tiltable via hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf grate extension/steel mesh side panels, 600 mm high, pendulum-type on all four sides Incl. aluminium loading ramps and 2 x support legs Due to business closure the trailer was repurchased. It is in as-new condition and has only been used approx. 3 times. - V-drawbar, hot-dip galvanised - Chassis and tipping frame, hot-dip galvanised by immersion - Tipping body made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg permissible total weight, electric pump with hand pump - 13-pin plug and reversing light - Aluminium side walls, 350 mm high, fully removable - Rear tailgate can be swung - 6 lashing rings fitted to the bridge floor, lashing capacity 800 kg per ring, Dekra certified - Jockey wheel - Plank compartment pre-installed for easy retrofitting of aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) Djdexyulfopfx Al Hjut We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free temporary registration number plate. We repair trailers of all brands. Further accessories available on request. Technical modifications, price changes and errors excepted. We accept no liability for mistakes or typographical errors. Reversing automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, chassis and tipping frame hot-dip galvanised by immersion, braked, V-drawbar hot-dip galvanised by immersion, tipping body made from one-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight electric pump with hand pump, 13-pin connector and reversing light, aluminium side walls 350 mm high, fully removable, rear flap can be swung, 6 lashing rings fitted to the bridge floor (lashing capacity 800 kg per ring, Dekra certified), plank compartment pre-installed for easy retrofitting of aluminium planks.

Stanje: novo, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.035 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 1.475 mm, Leto izdelave: 2026, Oprema: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of manufacture: 2026 * GVW: 10,500 kg * Payload: 7,500 kg * Unladen weight: 3,000 kg * Overall dimensions: 6960 x 2550 x 1475 mm * Deck dimensions: 5035 x 2420 x 500 mm * Steel drop sides: 500 mm high * Infinitely height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electrical and air brake connections on the drawbar * Ramp storage compartment with 2 aluminium loading ramps integrated into the chassis frame * 8 t loading ramps available for an extra charge of €1,499 IMPORTANT NOTICE! PLEASE READ CAREFULLY! Djdpfx Aeqnrtajl Hout We expressly reserve the right of prior sale, as this item is also being offered on other platforms. We strongly recommend an inspection and check to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and checks can be arranged at any time by appointment and are expressly encouraged! Images are similar and may show optional equipment subject to an extra charge. Specified internal dimensions are approximate. TRADE-IN POSSIBLE FOR ALMOST ANYTHING!! EXCHANGE DEALS AND TRADE-UPS POSSIBLE!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 5.600 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.030 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.200 mm, skupna višina: 1.400 mm, Leto izdelave: 2026, * Humbaur HTK 754020 * Three-way tipper * New vehicle * Tandem chassis * Year of manufacture: 2025 * Gross weight: 7,500 kg * Unladen weight: 1,900 kg * Payload: 5,600 kg * Overall dimensions: 6,040 mm x 2,200 mm x 1,400 mm Duodpfsttfm Hox Al Hjt * Internal dimensions: 4,000 mm x 2,030 mm x 400 mm * Loading height: 920 mm * Steel side and rear drop-down/removable sidewalls * Rear drop side swinging with central locking * Height-adjustable drawbar approx. 590 mm - 930 mm * Torsion bar axles and parabolic suspension * Integrated storage channel for loading ramps * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4 mm steel plate * 3 pairs of recessed lashing points * Air brake system with ALB / ABS ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend an inspection and evaluation to avoid any misconceptions about the condition and suitability of the vehicle. Viewings and inspections are possible at any time by appointment and are expressly encouraged! Images are for reference only; may include optional accessories at extra cost. All internal dimensions are approximate. For new vehicles, additional charges may apply for transport and documentation. TRADE-INS ACCEPTED FOR ALMOST EVERYTHING! PART EXCHANGE AND TRADE-UPS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 AM to 5:00 PM, Saturday 8:30 AM to 2:00 PM Over 500 new and used trailers constantly in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, številka stroja/vozila: ebf3f771e96394cd89e56bbb7, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Central-axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes screwed into the floor/external frame, each rated at 5 tons 2 additional pairs of lashing eyes screwed into the floor, each rated at 5 tons, in the corners Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter-shell fenders 1 plastic toolbox with shelf, dimensions 620mm (w) / 360mm (h) / 440mm (d), lockable with a padlock (padlock not included) Central-axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/Tread plate floor for high point load capacity Note: Minor floor waviness possible due to welding distortions! Platform length approx. 5,200 mm Rear slope approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, height 400 mm Sideboards 25 mm aluminum hollow profile, height 400 mm, foldable and removable Rear wall / rear corner posts 1 pair of steel posts attached to the frame with bracket for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Covered with 3 toothed steel rails With gas pressure springs for single-person operation Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Dujdpfxei Rixrs Al Hot Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Front wall: aluminum Sideboards: anodized aluminum Loading ramps: hot-dip galvanized Attention! These are archive images.

Stanje: novo, lastna masa: 1.260 kg, največja dovoljena obremenitev: 2.240 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 300 mm, vzmetenje: jeklo, velikost pnevmatike: 195/50r13c, Large three-way tipper from trailer manufacturer HAPERT, model COBALT HM-2-FERRO, 3500kg, 405x200x30mm. In our opinion, the COBALT tipper series from Hapert is extremely robust, very well equipped, and offered at a fair price. This car trailer, designed as a flatbed high loader, is built for durability. High-quality features and a very comfortable suspension system (parabolic spring suspension) are standard on this three-way tipper trailer. Here is an overview of the comprehensive standard features of this tipping trailer: - Built with an extremely stable, hot-dip galvanized steel frame - Solid steel floor - Loading ramps stowable under the platform - Crank-type rear support stands - Parabolic suspension with shock absorbers, rated for 100 km/h - Electrohydraulics with battery in a covered compartment - Detachable illuminated control unit - Double-walled anodized aluminium side panels, all sides foldable and removable - Easy-to-use eccentric locks - Low chassis with 195/50R13C tires Dodpoqxbknefx Al Hsut - Lashing rings rated for 1000kg - Net hooks - Steel plate on wooden floor - Automatic jockey wheel and reinforced V-drawbar We offer useful accessories for Hapert three-way tippers. At a reasonable price, you can get side wall extensions, mesh sides, tarpaulin, frame for cover, flat tarpaulin, battery charger, emergency hand pump, toolbox, lashing straps, and anti-theft device.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable Dusdpfxoflw Sbj Al Hst - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, največja dovoljena obremenitev: 2.527 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 950 mm, SARIS - GIGANT K3 3-Way Tipper with Mesh Side Extension TECHNICAL DATA * Trailer Type: SARIS - GIGANT K3 – 3-Way Tipper + Mesh Sides * Gross Vehicle Weight: 3,500 kg * Payload: 2,527 kg * Internal Dimensions (LxWxH): 406 cm x 204 cm x 95 cm * External Dimensions (LxWxH): 565 cm x 221 cm x 169 cm * Loading Height: approx. 69 cm * Floor: Steel plate on wooden base * Lashing Points: 4 per side * Side Panels: Aluminium * Frame: Welded steel frame, hot-dip galvanized * Electrical System: 13-pin, 12 V * Tyres: 195/50R13C * Axle Manufacturer: AL-KO or KNOTT * Number of Axles: 2 * Braked Axle * Automatic Jockey Wheel * WITHOUT shock absorber suspension * Pump: Electric, without hand pump * Mesh Side Extension Plus registration documents/COC certificate: €39.00 All prices incl. VAT. Images may show optional extras and do not necessarily correspond to standard specification. Technical changes (e.g. tyre sizes) reserved. Delivery: Delivery by freight carrier possible, €1.50 per transport kilometre nationwide (one way, from Seesen to destination), minimum charge €270.00 plus VAT. Visit us also at You can also purchase your desired trailer and accessories by prior arrangement at: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: Dedpothltqsfx Al Hsut BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: FINANCING OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Images may include options not included in the standard specification. Technical changes (e.g. tyre sizes) reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Further information Dodpfx Asvy Tvtel Hsut New: No

Stanje: novo, lastna masa: 1.170 kg, največja dovoljena obremenitev: 2.330 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 900 mm, Hapert 3-Way Tipper Cobalt HM Permissible total weight: 3500 kg 405x200x +++*IMMEDIATELY AVAILABLE+++* With drive-on package, crank supports, parabolic suspension, 100 km/h shock absorber approval and certificate 70 cm high removable side walls, swinging or fixed You can use this three-way tipper daily for transporting bulk materials, but it is also perfectly suited for your excavators and other machinery thanks to its robust design. As the Cobalt HM can tip to three sides, it is especially well-suited for use in areas with limited space. The Cobalt HM features a steel floor, electric pump with battery, and hand pump, enabling you to unload your cargo quickly and efficiently. Because, as with you: time is money. TÜV-certified load securing system Specially designed side wall hinges for easy attachment of load nets 4 removable corner posts Aluminium side walls, 30 cm high, with robust flush-mounted locks If you have any questions, feel free to send us a message or give us a call! Dsdjqwkp Hjpfx Al Hsut Technical modifications, price changes, errors, and prior sale reserved. No liability for mistakes or typographical errors.

Stanje: rabljeno, prevoženi kilometri: 280.588 km, moč: 132 kW (179,47 KM), prva registracija: 09/2002, vrsta goriva: dizel, lastna masa: 4.600 kg, največja dovoljena obremenitev: 2.890 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 4.200 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 3, število sedežev: 2, dolžina tovornega prostora: 6.150 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, zapora diferenciala, zavorni sistem na stisnjen zrak, * German vehicle * Condition as per photos * Only 280,588 km original mileage * Cab with 3 seats * Long flatbed * Dimensions: 6.15 m x 2.45 m x 0.50 m * Aluminium drop sides * High front panel * Removable central stakes * Wooden loading floor * DIN lashing rings * Pre-equipment for trailer coupling * Permissible trailer load: 8,200 kg * Total train weight: 18,700 kg * Spare wheel mount + spare wheel * 6-speed manual gearbox * Leaf suspension * Differential lock * Engine brake * Cruise control Dedev Hfrmjpfx Al Hout * Heated mirrors * Wheelbase: 4.20 m * GVW: 10,500 kg * Upgradable to 10,500 kg GVW without technical modification * Unladen weight: 4,600 kg * Payload: 2,890 kg If a new TÜV inspection is required, we would be pleased to provide you with a quote from our partner workshops. Our offer generally is WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misunderstandings regarding the condition and suitability. Viewing and inspections are possible at any time by prior appointment and are expressly encouraged. All details given without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors.