Humbaur 3-Seitenkipper Htk 3000.31 Alu, Mit Laubgitteraufsatz, 3140 X 1750 X 350 Mm, 3,0 To. nakup rabljenega (61.998)

Stanje: rabljeno, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Oprema: garancija za rabljena vozila, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Box dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load area hydraulically tiltable via hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf grate extension/steel mesh side panels, 600 mm high, pendulum-type on all four sides Incl. aluminium loading ramps and 2 x support legs Due to business closure the trailer was repurchased. It is in as-new condition and has only been used approx. 3 times. Bwedsxyulfjpfx Al Hol - V-drawbar, hot-dip galvanised - Chassis and tipping frame, hot-dip galvanised by immersion - Tipping body made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg permissible total weight, electric pump with hand pump - 13-pin plug and reversing light - Aluminium side walls, 350 mm high, fully removable - Rear tailgate can be swung - 6 lashing rings fitted to the bridge floor, lashing capacity 800 kg per ring, Dekra certified - Jockey wheel - Plank compartment pre-installed for easy retrofitting of aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free temporary registration number plate. We repair trailers of all brands. Further accessories available on request. Technical modifications, price changes and errors excepted. We accept no liability for mistakes or typographical errors. Reversing automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, chassis and tipping frame hot-dip galvanised by immersion, braked, V-drawbar hot-dip galvanised by immersion, tipping body made from one-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight electric pump with hand pump, 13-pin connector and reversing light, aluminium side walls 350 mm high, fully removable, rear flap can be swung, 6 lashing rings fitted to the bridge floor (lashing capacity 800 kg per ring, Dekra certified), plank compartment pre-installed for easy retrofitting of aluminium planks.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Bwsdpfxektm Sus Al Hjl Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-way Tipper HTK Alu 3000.31 Permissible Total Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With sheet metal extension, 600 mm high, 4-way hinged Including flat tarpaulin - V-drawbar, hot-dip galvanized by immersion - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with electric pump and hand pump - 13-pin connector and reversing lights - Side panels made of aluminum, 350 mm high, completely removable - Rear flap pendulum mounted - 6 lashing rings mounted on the platform floor, lashing force 800 kg each, Dekra certified - Support wheel - Railing trough pre-equipped for quick retrofitting of aluminium ramps Price includes vehicle registration document (Part II registration certificate and COC papers). We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Technical specifications, prices, and information subject to change and errors excepted. No liability for errors or misprints. Bwsdpeyw Ez Uefx Al Hjl Features: Automatic reversing, rubber torsion axle, independent suspension, tiltable bed, support wheel, marker lights, chassis and tipping body hot-dip galvanized by immersion, braked, includes warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side panels, completely removable, pendulum-mounted rear hatch, 6 lashing rings with 800 kg tensile force each, Dekra certified, ramp channel pre-equipped for easy retrofitting of aluminum ramps.

Stanje: novo, lastna masa: 870 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load platform hydraulically tip-able with hand pump and electric pump Tipping angle rear 42°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made from one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight also with electric pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear panel pendulum-type - 6 lashing rings mounted on bed, 800 kg tensile force each, Dekra certified - Jockey wheel - Stake pocket prepared for retrofitting aluminium ramps Price includes vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Bjdpfxerq Ew Ts Al Hswl On request, we offer a free temporary registration plate. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or typographical mistakes. Features: auto-reverse braking, rubber suspension axle, independent wheel suspension, tipper platform, jockey wheel, marker lights, hot-dip galvanized chassis and tipper body, braked, includes warranty, V-drawbar hot-dip galvanized, one-piece steel tipper body, 4-stage hard-chromed tipper cylinder, hand pump, electric pump from 3,000 kg permissible gross weight, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, pendulum-type rear panel, 6 lashing rings on bed (800 kg tensile force each, Dekra certified), ramp pocket for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Bwodpfx Ajwlabxel Hsl Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading Platform Hydraulically Tippable with Hand Pump and Electric Pump Tip Angle: Rear 42°, Side 50° - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - 350 mm high side walls made of aluminium, completely removable - Rear flap can be used as a swing tailgate - 6 lashing rings mounted on the bridge floor, each with an 800 kg tie-down capacity, DEKRA-certified - Jockey wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Silver side panels - Parabolic suspension Price includes vehicle registration certificate (Part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Subject to technical changes, price adjustments, and errors. No liability for mistakes or printing errors. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, tilting loading area, jockey wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminium side walls, completely removable, rear flap can be used as a swing tailgate, 6 lashing rings on the bridge floor (800 kg capacity per ring, DEKRA-certified), plank compartment prepared for easy retrofit of aluminium ramps, silver side panels, parabolic suspension.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Bwsdpfx Asvtf Nfsl Hjl Unladen Weight: 1,040 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tip angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipper bed, hot-dip galvanized - Tipper bed made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear tailgate with pendulum function - 6 lashing rings mounted on the bed floor, each with a lashing force of 800 kg, Dekra-certified - Support wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Black side panels - Parabolic suspension Price includes registration certificate (part II) and COC documentation We have a large range of trailers by the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate for carriage. We service and repair trailers of all manufacturers. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Reversing automatic, rubber suspension axle, independent suspension, tiltable platform, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper bed made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium removable side panels, pendulum-type rear tailgate, 6 lashing rings (800 kg each, Dekra-certified), preparation for aluminium ramps, black side panels, parabolic suspension.

Stanje: novo, lastna masa: 850 kg, največja dovoljena obremenitev: 1.840 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Side Tipper HTK Alu 2700.31 Permissible total weight: 2700 kg Payload: 1850 kg Unladen weight: 850 kg Body dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 745 mm Loading platform hydraulically tiltable via hand pump Tipping angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized (immersion bath) - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight with additional electric pump - 13-pin plug and reversing light - Sidewalls made of powder-coated, galvanized steel, completely removable - Rear flap with swinging function - 6 lashing rings mounted on platform floor, each with 800 kg lashing capacity, Dekra tested - Support wheel Bwsdsrvgtvspfx Al Hol - Slot for aluminium ramps pre-installed for easy retrofitting Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit (transfer) licence plate. We repair trailers of all makes. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reverse function, rubber-sprung axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sidewalls, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump–from 3000 kg permissible total weight with electric pump, 13-pin plug and reversing light, sidewalls powder-coated and fully removable, swinging rear flap, 6 lashing rings with 800 kg capacity each (Dekra certified), slot for aluminium ramps pre-installed for easy retrofitting.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Bodpfxevtf I Ue Al Hswl Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Box Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° Bwedpferazk Uex Al Hel Key Features: - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Side walls made from 350 mm high aluminium, completely removable - Rear tailgate can swing - 6 lashing rings mounted on the platform floor, each with 800 kg pull force, Dekra certified - Support wheel - Channel prepared for easy retrofit of aluminium loading ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price adjustments, and errors excepted. No liability for errors or misprints. Features: Reverse automatic brake, rubber suspension axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipper platform hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium drop sides, completely removable, swinging rear gate, 6 lashing rings on floor (800 kg pull each, Dekra tested), ramp channel for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified Bwjdeflw Sbjpfx Al Hjl - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.251 mm, delovna širina: 2.022 mm, Manufacturer: Humbaur Bedpfxsl Dqldo Al Hswl Model: 3-Way Tipper HTK Alu 3000.37 Permissible Gross Weight: 3000 kg Payload: 2100 kg Unladen Weight: 900 kg Body Dimensions: 3630 x 1850 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable via manual pump and electric pump Tipping angle rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platform fully hot-dip galvanized - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Manual pump; from 3000 kg gross weight onwards: electric pump with manual backup - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear tailgate can be used as a swinging gate - 8 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra tested - Jockey wheel - Preparation for aluminum ramps (ramp compartment) for easy retrofitting Price includes registration documents (Certificate of Title Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: auto-reverse brakes, rubber suspension axle, independent suspension, tiltable loading platform, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, manual pump, from 3000 kg gross weight electric pump with manual backup, 13-pin plug and reversing lights, aluminum side walls 350 mm high, fully removable, rear swinging tailgate, 8 lashing rings mounted to the platform with 800 kg tensile load per ring, Dekra approved, ramp compartment as preparation for retrofitting aluminum ramps.

Stanje: novo, lastna masa: 1.140 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Gross Vehicle Weight: 3,500 kg Axles: Tridem Payload: 2,360 kg Unladen Weight: 1,140 kg Body Dimension: 4,100 x 2,100 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear 45°, side 45° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made from single-piece steel - 4-stage hard-chrome-plated tipping cylinder - Hand pump, from 3,000 kg gross weight with additional electric pump - 13-pin plug and reverse lights - Drop sides made of aluminium, 350 mm high, fully removable Bwjdpfxod T Svtj Al Hol - Rear flap is swing-type - Eight lashing rings fitted on the platform, each with 800 kg load capacity, Dekra-tested - Jockey wheel - Ramp tray prepped for easy retrofit of aluminium ramps Price includes vehicle registration document (part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request we can provide a free transfer number plate. We repair trailers from all manufacturers. Additional accessories on request. Subject to technical modifications, price changes, and errors. No liability for typing or printing errors. Reverse automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar, hot-dip galvanized, tipper platform made from single-piece steel, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm, fully removable, swing-type rear flap, 8 lashing rings on the platform, 800 kg per lashing ring, Dekra tested, ramp tray prepped for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: HTK Alu 3500.41 3-Way Tipper Gross Vehicle Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Bed Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13-inch Loading Height: 760 mm Load bed hydraulically tiltable with hand pump and electric pump Tipping angle: rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized via immersion bath - One-piece steel tipper platform - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with additional electric pump - 13-pin connector and reversing lights - 350 mm high aluminium drop sides, fully removable - Rear flap can swing - 8 lashing rings mounted on the platform floor, each with a pulling force of 800 kg, Dekra-tested - Jockey wheel - Plank box pre-installed for easy retrofitting of aluminium ramps Bwjdpfjri Tawjx Al Hol Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical and price changes as well as errors excepted. No liability for errors or misprints. Features: auto-reverse braking system, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar fully hot-dip galvanized, one-piece steel tipper platform, 4-stage hard-chromed tipping cylinder, hand pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, rear swing flap, 8 lashing rings mounted on the platform floor, pulling force 800 kg per ring, Dekra-certified, plank box pre-installed for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 1.335 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.220 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2000.27 Permissible Total Weight: 2,000 kg Payload: 1,335 kg Unladen Weight: 665 kg Body Dimensions: 2,670 x 1,500 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load Area hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg total weight, electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made from powder-coated, galvanized sheet steel, fully removable - Rear flap with swing function - 6 tie-down rings mounted on bed floor, load capacity 800 kg per ring, DEKRA certified - Jockey wheel Bwedpfx Alsgi Sr Se Hol - Channel as preparation for aluminium ramps for easy retrofitting Price includes vehicle registration document (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transit license plate. We repair trailers of all makes. Additional accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Reverse-automatic, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, galvanized steel sheet, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized by immersion, tipping bridge made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg total weight electric pump with hand pump, 13-pin connector and reversing lights, powder-coated, fully removable drop sides, rear flap with swing function, 6 tie-down rings mounted on the bed floor, load capacity 800 kg per ring, DEKRA certified, ramp channel prepared for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.27 Gross Vehicle Weight: 2700 kg Payload: 2025 kg Unladen Weight: 675 kg Internal Dimensions: 2670 x 1500 x 350 mm Tyres: 13 inch Loading Height: 725 mm Load bed hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping frame, hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump; for permissible total weight from 3000 kg electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made of powder-coated, galvanized steel plate, completely removable - Rear tailgate with swing function - 6 lashing rings mounted on platform floor, rated for 800 kg per ring, Dekra certified - Jockey wheel - Boarding plank compartment pre-installed for retrofitting aluminium planks Bwedpfxori Tbxo Al Hsl Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary registration plate from us. We repair trailers from all manufacturers. Additional accessories upon request. Subject to technical modifications, price changes, and errors. No liability for errors or misprints. Features: Automatic reverse, rubber suspension axle, independent wheel suspension, tilting load area, jockey wheel, marker lights, galvanized steel plate, braked, includes warranty, hot-dip galvanized V-drawbar, hot-dip galvanized chassis and tipping frame, one-piece steel tipping platform, 4-stage hard-chromed tipping cylinder, hand pump (from 3000 kg permissible total weight: electric pump with hand pump), 13-pin connector and reversing lights, powder-coated drop sides, fully removable, rear tailgate with swing function, 6 lashing rings mounted on floor rated at 800 kg each, Dekra certified, boarding plank compartment prepared for easy retrofitting of aluminium boarding planks.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). Bwsdpsri Tb Asfx Al Hol We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.210 mm, delovna širina: 2.003 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 3500.37 Permissible gross weight: 3,500 kg Payload: 2,500 kg Unladen weight: 1,000 kg Load bed dimensions: 3,630 x 1,850 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tipppable with manual pump and electric pump Tipping angle rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platforms, fully hot-dip galvanized - One-piece steel tipping platform Bwjdpfsrq Exbex Al Hel - 4-stage hard chrome tipping cylinder - Manual pump, and from 3,000 kg permissible gross weight onwards, electric pump with manual pump - 13-pin plug and reversing lights - Aluminium side boards, 350 mm high, fully removable - Swinging rear gate - 8 lashing rings on the bed, pull force 800 kg per ring, Dekra-certified - Support wheel - Plank compartment prepared for aluminium planks for easy retrofitting Price includes vehicle registration certificate (Certificate of Registration Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary license plate. We repair trailers of all makes. Further accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Features: automatic reverse, rubber suspension axle, independent suspension, tilting load platform, support wheel, position lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard chrome tipping cylinder, manual pump, from 3,000 kg permissible gross weight electric pump with manual pump, 13-pin plug and reversing lights, aluminium sidewalls 350 mm high, fully removable, swing rear gate, 8 lashing rings on the load bed, pulling force 800 kg per ring, Dekra certified, plank compartment prepped for easy retrofitting of aluminium planks.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3500 kg Payload: 2512 kg Unladen Weight: 988 kg Body Dimensions: 3140 x 1750 x 350 mm Tyres: 195 50 R13C Loading Height: 740 mm Load Platform hydraulically tiltable via hand pump and electric pump Tipping Angle: rear 42°, lateral 50° With 600 mm high steel side extension panels, pendulum-mounted on all four sides - V-drawbar, hot-dip galvanized immersion - Chassis and tipper frame hot-dip galvanized immersion - Tipper body made from steel, single-piece construction - 4-stage hard-chromed tipping cylinder - Hand pump, electric pump from 3000 kg GVW up, combined with hand pump - 13-pin connector and reversing lights - Removable aluminium side walls, 350 mm high, completely detachable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra certified - Support wheel Bwodpfofbiavex Al Hol - Plank compartment pre-installed for easy retrofitting with aluminium planks Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Reversing automatic, rubber-sprung axle, independent suspension, tiltable load platform, support wheel, clearance lights, chassis and tipper frame hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipper body single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg GVW up electric pump with hand pump, 13-pin plug and reversing lights, removable aluminium sidewalls 350 mm high, rear tailgate pendulum-mounted, 6 lashing rings mounted on the platform floor, tensile strength 800 kg per ring, Dekra certified, plank compartment as preparation for easy retrofitting with aluminium planks.

Stanje: novo, lastna masa: 640 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 2.820 mm, delovna širina: 2.163 mm, Manufacturer: Humbaur Model: High-loader HT 304121 Permissible total weight: 3,000 kg Payload: 2,360 kg Unladen weight: 640 kg Body dimensions: 4,100 x 2,100 x 350 mm Equipped with light grey tarpaulin and 200 cm tall frame (interior height) Tyres: 14 inch Loading height: 755 mm - V-drawbar, hot-dip galvanised - 13-pin plug and reversing lights - 18 mm strong floor plate - Sidewalls made from anodised aluminium with recessed locks, fully removable - Lashing rings integrated into the V-exterior frame profile, lashing capacity 400 kg per ring, Dekra-approved - 8 lashing eyes - Support wheel - Humbaur multifunction lights integrated into underrun protection Price incl. vehicle registration documents (Zulassungsbescheinigung Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we can provide a free temporary registration plate. We repair trailers of all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or misprints. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tall tarpaulin, support wheel, marker lights, V-drawbar hot-dip galvanised, braked, incl. warranty, 13-pin plug and reversing lights, 18 mm strong floor plate, anodised aluminium sidewalls with recessed locks, fully removable, lashing rings integrated into the V-exterior frame profile, lashing capacity 400 kg per ring, Dekra approved, 8 lashing eyes. Bjdpfx Aor Eintel Hewl

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf mesh extension/steel mesh extension 600 mm high, swinging on all 4 sides - V-drawbar hot-dip galvanised - Chassis and tipping platform hot-dip galvanised by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder Bwedpfx Aorazlkel Hol - Hand pump; electric pump with hand pump from 3,000 kg gross weight - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate, pendulum mounted - 6 lashing rings fitted on platform floor, each ring tested by Dekra for a load capacity of 800 kg - Jockey wheel - Channel for ramps, pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a complimentary transit/temporary licence plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability assumed for errors or misprints. Automatic reversing mechanism, rubber spring axle, independent wheel suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, includes warranty, V-drawbar hot-dip galvanised by immersion, one-piece steel construction tipping platform, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg gross weight, 13-pin connector and reversing light, aluminium side panels 350 mm high, fully removable, rear gate pendulum mounted, 6 lashing rings on the platform floor (Dekra certified, 800 kg per ring), ramp channel pre-installed for easy retrofitting with aluminium ramps.

Stanje: novo, lastna masa: 690 kg, največja dovoljena obremenitev: 2.310 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: drugo, gradbena višina: 970 mm, delovna širina: 1.890 mm, Manufacturer: Humbaur Model: Rear Tipper Tandem HUK 303117 Permissible Gross Weight: 3,000 kg Payload: 2,310 kg Unladen Weight: 690 kg Bed Dimensions: 3,140 x 1,750 x 300 mm Tyres: 13-inch Loading Height: 670 mm Bjdpfx Alox Iv I Ts Hjwl Load Area Hydraulically Tiltable via Hand Pump Tipping Angle: 45°, with mesh side extension (600 mm) With AkkuFlex pump, enables tipping using a cordless drill Demonstration trailer at a special price - Chassis and tipping platform welded and hot-dip galvanized - Galvanized loading bed (3 mm) - V-groove outer frame with 4 pairs of recessed lashing rings - Sidewalls 300 mm – foldable all around - 13-pin plug and reversing lights - Drawbar latches - Tapered corner stanchions - Automatic jockey wheel - Humbaur multifunction lighting integrated into underride guard - 3-stage telescopic cylinder - Hand pump Price incl. vehicle registration document (registration certificate part II and COC papers) We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we will provide a free transit registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical and price changes as well as errors excepted. No liability for mistakes or printing errors. Features: - Automatic reverse mechanism - Rubber suspension axle - Independent wheel suspension - Tiltable load area - Automatic jockey wheel - Marker lights - Galvanized loading bed (3 mm) - Braked - Includes warranty - Chassis and tipping platform welded and hot-dip galvanized - V-groove outer frame with 4 pairs of recessed lashing rings - Sidewalls 300 mm – foldable all around - 13-pin plug and reversing lights - Drawbar latches - Tapered corner stanchions - Humbaur multifunction lighting integrated into underrun protection - 3-stage telescopic cylinder - Hand pump

Stanje: novo, lastna masa: 800 kg, največja dovoljena obremenitev: 2.200 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.220 mm, širina tovornega prostora: 2.070 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 4,4 m³, barva: drugo, gradbena višina: 1.120 mm, delovna širina: 2.136 mm, Manufacturer: Humbaur Model: Hochlader HT 30 52 21 GR Permissible total weight: 3,000 kg Payload: 2,200 kg Bwedpfx Alegi Sv Sj Hel Unladen weight: 800 kg Bed dimensions: 5,220 x 2,070 x 350 mm Tyres: 14 inch Loading height: 770 mm - V-drawbar, hot-dip galvanised - 13-pin plug and reversing lights - 18 mm thick floor plate - Side walls made of anodised aluminium, fully removable with recessed fasteners - Lashing rings integrated in the V-external frame profile, load capacity 400 kg per lashing ring, DEKRA tested - 8 lashing eyes - Jockey wheel - Humbaur multifunctional lighting integrated in underrun protection Price includes vehicle documentation (registration certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: Reversing automatic, rubber suspension axle, independent wheel suspension, jockey wheel, marker lights, V-drawbar hot-dip galvanised, braked, including warranty, 13-pin plug and reversing lights, 18 mm thick floor plate, side walls made of anodised aluminium, fully removable with recessed fasteners, lashing rings integrated in the V-external frame profile, load capacity 400 kg per lashing ring, DEKRA tested, 8 lashing eyes.

Stanje: novo, lastna masa: 367 kg, največja dovoljena obremenitev: 1.600 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.030 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 9 m³, barva: siv, gradbena višina: 2.550 mm, delovna širina: 2.040 mm, Manufacturer: Humbaur Model: Low Loader Alu HA 203015 Permissible total weight: 2,000 kg Payload: 1,600 kg Unladen weight: 400 kg Internal dimensions: 3,030 x 1,500 x 350 mm Bwjdpfod T Stujx Al Hsl Equipped with light grey tarpaulin and 2,000 mm high hoop frame (internal clearance including Eco nose, front tapered) Tyres: 13-inch Loading height: 525 mm with fold-down front panel Features: - V-drawbar, fully hot-dip galvanized by immersion - 13-pin plug - 15 mm thick floor panel - Side walls made from anodised aluminium - Drop sides with flush-fit locks - 6 lashing rings integrated into side walls, load capacity 400 kg per lashing ring, Dekra approved - Humbaur multifunctional lighting integrated into underrun protection Price includes vehicle documents (Registration Certificate Part II and Certificate of Conformity) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we can provide a complimentary transit license plate. We repair trailers of all makes. Additional accessories available on request. Technical specifications, prices, and errors subject to change. No liability for mistakes or typographical errors. Features: - Automatic reversing system - Rubber suspension axle - Independent wheel suspension - High tarpaulin - Jockey wheel - Marker lights - V-drawbar, fully hot-dip galvanized by immersion - Braked - Incl. warranty - 13-pin plug - 15 mm thick floor panel - Side panels made from double-walled anodised aluminium profile - Drop sides with flush-fit locks - 6 lashing rings integrated into side walls, load capacity 400 kg per lashing ring, Dekra approved

Stanje: novo, lastna masa: 690 kg, največja dovoljena obremenitev: 2.310 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: drugo, gradbena višina: 970 mm, delovna širina: 1.890 mm, Manufacturer: Humbaur Bedpsri Tb Ujfx Al Hjwl Model: Rear tipper tandem HUK 303117 Gross vehicle weight: 3000 kg Payload: 2310 kg Unladen weight: 690 kg Body dimensions: 3140 x 1750 x 300 mm Tyres: 13 inch Loading height: 670 mm Loading platform hydraulically tiltable via hand pump Tipping angle: 45° - Chassis and tipping platform welded and hot-dip galvanized - Galvanized platform floor (3 mm) - V-groove external frame with 4 pairs of recessed lashing rings - 300 mm drop-down side panels all around - 13-pin plug and reversing light - Tie rod closures - Tapered corner stanchions - Automatic jockey wheel - Humbaur multifunctional lighting integrated into underride protection - 3-stage telescopic cylinder - Hand pump Price includes vehicle registration certificate (ZB II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available on request. Specifications and prices subject to change and errors excepted. No liability for errors or typographical mistakes. Features: auto-reversing system, rubber-ride axle, independent suspension, tiltable loading area, automatic jockey wheel, marker lights, galvanized platform floor (3 mm), braked, including warranty, welded chassis and tipping platform with full hot-dip galvanization, V-groove external frame with 4 pairs of recessed lashing rings, 300 mm drop-down side panels all around, 13-pin plug and reversing light, tie rod closures, tapered corner stanchions, Humbaur multifunctional lighting integrated into the underride guard, 3-stage telescopic cylinder, hand pump.

Stanje: novo, lastna masa: 700 kg, največja dovoljena obremenitev: 2.650 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: srebrn, gradbena višina: 2.800 mm, delovna širina: 2.163 mm, Manufacturer: Humbaur Model: High-loader HT 354121 Permissible total weight: 3500 kg Payload: 2800 kg Payload with high tarpaulin approx. 2650 kg Unladen weight: 700 kg Unladen weight with high tarpaulin approx. 850 kg Loading dimensions: 4100 x 2100 x 350 mm With high tarpaulin: internal height 220 cm Color: Silver Tyres: 185 R14C 104 load index Loading height: 770 mm Incl. 100 km/h approval Both sides with sliding tarpaulin Tarpaulin silver with frame, internal height 220 cm, Made in Germany Only high-quality truck tarpaulin used (680 g/m²). Tarpaulin color is freely selectable (color chart available by email on request). Custom dimensions and versions available upon request. Lettering available in stencil, screen print, or digital print. Bedofic T Ispfx Al Howl We would be happy to provide a customized offer. V-drawbar, hot-dip galvanized 13-pin plug and reversing lights 18 mm thick phenolic coated floor plate Side walls made of anodized aluminium with recessed locks, fully removable Lashing rings integrated in the V-exterior frame profile, lashing force 400 kg per lashing ring, Dekra certified Support wheel Price includes vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request we provide a free temporary license plate for transport. We repair trailers of all makes. Further accessories available on request. Technical specifications, pricing, and errors subject to change. No liability for mistakes or printing errors. Features: Reverse-automatic brake, rubber suspension axle, independent suspension, high tarpaulin, support wheel, marker lights, hot-dip galvanized V-drawbar, braked, incl. warranty, 13-pin plug and reversing lights, 18 mm thick floor plate, side walls made of anodized aluminium with recessed locks, fully removable, lashing rings integrated in the V-exterior frame profile, lashing force 400 kg per lashing ring, Dekra certified, 8 tie-down rings.