Tristrani nagibni priklopnik

Humbaur 3-Seitenkipper HTK 3000.31 Alu, 3140 x 1750 x 350 mm, 3,0 to.

Stanje: rabljeno, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Oprema: garancija za rabljena vozila, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Box dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load area hydraulically tiltable via hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf grate extension/steel mesh side panels, 600 mm high, pendulum-type on all four sides Incl. aluminium loading ramps and 2 x support legs Due to business closure the trailer was repurchased. It is in as-new condition and has only been used approx. 3 times. - V-drawbar, hot-dip galvanised - Chassis and tipping frame, hot-dip galvanised by immersion - Tipping body made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg permissible total weight, electric pump with hand pump - 13-pin plug and reversing light - Aluminium side walls, 350 mm high, fully removable - Rear tailgate can be swung - 6 lashing rings fitted to the bridge floor, lashing capacity 800 kg per ring, Dekra certified - Jockey wheel - Plank compartment pre-installed for easy retrofitting of aluminium planks Iodoxyulfepfx Ab Ustr Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free temporary registration number plate. We repair trailers of all brands. Further accessories available on request. Technical modifications, price changes and errors excepted. We accept no liability for mistakes or typographical errors. Reversing automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, chassis and tipping frame hot-dip galvanised by immersion, braked, V-drawbar hot-dip galvanised by immersion, tipping body made from one-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight electric pump with hand pump, 13-pin connector and reversing light, aluminium side walls 350 mm high, fully removable, rear flap can be swung, 6 lashing rings fitted to the bridge floor (lashing capacity 800 kg per ring, Dekra certified), plank compartment pre-installed for easy retrofitting of aluminium planks.

Stanje: novo, številka stroja/vozila: NEW-2, lastna masa: 694 kg, največja dovoljena obremenitev: 2.006 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, barva: srebrn, zavore: drugo, POČITNIŠKA AKCIJA: do 15 % popusta na dodatno opremo, kot so mreža za listje, električna naprava za kipanje in integrirane rampe. Nova serija trostranih kiperjev! Dvoosni trostranski visoki kiper, z aluminijastimi stranicami, ki se lahko spuščajo in odstranijo na vseh straneh, lesena tla s pločevino, varjen in vroče pocinkan jeklen okvir, z avtomatskim podpornih kolesom, ročno hidravlično črpalko, 6 pritrdilnih obročev standardno ob strani v V-kanalu. Dodatni stroški prevoza do Gera in prometno dovoljenje neto 250 €. Dodatna oprema po izbiri za doplačilo: mreža za listje, ponjava in lok, oprema za 100 km/h, integrirane nalivne rampe, električno upravljanje. Možnost financiranja/ličinga. Itodpfx Absghpdfe Uer Slike so simbolične, del dodatne opreme je za doplačilo!

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified Itsdpfjktm Sujx Ab Usr - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Itedpfx Aori Tb Aob Uor Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: rabljeno, velikost pnevmatike: -, Leto izdelave: 2008, obratovalne ure: 8.060 h, Oprema: kabina, Ref.: 8009 Teža: 14 ton Itsdpfexacywex Ab Ujr Rok dobave (v dneh): 1

Stanje: novo, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 350 mm, skupna širina: 2.210 mm, skupna višina: 1.110 mm, Saris K3 406 204 3500 3 – Power Meets Precision Now available from Blyss Transportechnik, your partner for professional transport solutions. The Saris K3 is more than just a tipper. It’s a statement for efficiency, durability, and versatility. With an impressive loading area of 406 × 204 cm, a payload capacity of over 2,300 kg, and an electric 3-way tipping system, this trailer is the perfect choice for construction companies, landscapers, and anyone who moves heavy loads daily. Key features at a glance: * Electric operation – Convenient control at the push of a button * Low platform height – Easy loading and unloading * Fully welded, hot-dip galvanized chassis – Maximum stability and corrosion protection * Over 200 robotic welds – Precision and long service life * Double-walled aluminium side panels (35 cm) – Robust and lightweight, with practical tension locks * Heavy-duty automatic jockey wheel – Secure stand even when fully loaded * 8 noise-reducing lashing rings (800 daN) – Safe transport of your cargo * 10 rope hooks & hinges with net hooks – Flexible and versatile use Itjdpfx Aew R Ixnob Uor * Steel plate over wooden floor – Durable and resilient * Large tipping angle of 42° – Efficient unloading even with bulky materials * Universal accessories – For customised requirements and extensions

Stanje: novo, konfiguracija osi: 2 osi, prva registracija: 10/2025, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, barva: črn, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Humbaur Three-Way Tipper with Electric Pump and Black Steel Side Panels Manufacturer: Humbaur Model: HTK 3000.31 Internal dimensions: 3140 x 1750 x 350 mm (L x W x H) Permissible total weight: 3,000 kg Payload: approx. 2,085 kg (payload may vary depending on equipment and design) Tyres: 13 inch Loading height: approx. 695 mm Features: - Electric hydraulic pump with cable remote control, battery, and emergency hand pump - Battery and hydraulic unit with cover - Tipping angle rear and side: approx. 45° - Robust, foldable and removable black steel side panels - Durable angle lever locks on the side panels - V-tow bar bolted to a welded frame construction - Hot-dip galvanized chassis and tipping bed - Solid, one-piece steel tipping bed (completely wood-free) - 4-stage tipping cylinder - Rear pendulum tailgate - 13-pin plug with reversing lights - 6 recessed lashing points integrated into the bed floor, pull capacity 800 kg per lashing ring - Automatic jockey wheel - Integrated ramp compartment for easy retrofitting of aluminium loading ramps - Mudguards - Side marker lights - Incl. vehicle documents Optional extras and accessories for this trailer: - 600 mm mesh attachment - Additional 350 mm side wall extension Iedpfxetr I Hno Ab Uotr - 600 mm aluminium sheet extension - Aluminium loading ramps with 2,800 kg load capacity per pair - Lashing hooks mounted on the side panels - Load securing net - Shock absorbers - Toolbox - Registration of your new trailer at the vehicle registration office We would be happy to show you how you can finance your new trailer with convenient monthly installments and provide you with a personalized financing offer. We have over 2,000 trailers always in stock. You can find many of our trailers online or visit us in Horn-Bad Meinberg—we look forward to seeing you! Please note: Illustrations may show accessories not included in the standard delivery. Due to ongoing developments, illustrations and technical data may vary slightly. Subject to errors and changes.

Stanje: novo, lastna masa: 850 kg, največja dovoljena obremenitev: 1.840 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Side Tipper HTK Alu 2700.31 Permissible total weight: 2700 kg Payload: 1850 kg Unladen weight: 850 kg Body dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 745 mm Loading platform hydraulically tiltable via hand pump Tipping angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized (immersion bath) - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight with additional electric pump - 13-pin plug and reversing light - Sidewalls made of powder-coated, galvanized steel, completely removable - Rear flap with swinging function - 6 lashing rings mounted on platform floor, each with 800 kg lashing capacity, Dekra tested - Support wheel - Slot for aluminium ramps pre-installed for easy retrofitting Price includes vehicle registration documents (Registration Certificate Part II and COC papers) Iedpfx Ajrvgtvob Ustr We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit (transfer) licence plate. We repair trailers of all makes. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reverse function, rubber-sprung axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sidewalls, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump–from 3000 kg permissible total weight with electric pump, 13-pin plug and reversing light, sidewalls powder-coated and fully removable, swinging rear flap, 6 lashing rings with 800 kg capacity each (Dekra certified), slot for aluminium ramps pre-installed for easy retrofitting.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Box Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° Iodpfjrazk Usx Ab Uotr Key Features: - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Side walls made from 350 mm high aluminium, completely removable - Rear tailgate can swing - 6 lashing rings mounted on the platform floor, each with 800 kg pull force, Dekra certified - Support wheel - Channel prepared for easy retrofit of aluminium loading ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price adjustments, and errors excepted. No liability for errors or misprints. Features: Reverse automatic brake, rubber suspension axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipper platform hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium drop sides, completely removable, swinging rear gate, 6 lashing rings on floor (800 kg pull each, Dekra tested), ramp channel for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Isdpfx Asvtf I Uob Ujtr Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.