Tristrani nagibni priklopnik

HUMBAUR HTK 754020 Dreiseitenkipper GG:7,5to

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Ljdpfxetcwkrj Ab Usak Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: novo, skupna masa: 1.500 kg, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.450 mm, višina nakladalnega prostora: 300 mm, Leto izdelave: 2025, ANHÄNGERWIRTZ - the online pick-up market for your new trailer - offers strong brand models! Over 700 new trailers in stock More than 130 used trailers always available Non-binding example: New – only while stocks last! Rear tipper S light 250x145x30cm 1500kg single-axle high loader, low V chassis, manual hydraulic tilting platform with 30cm folding and removable aluminium sideboards all round, reflector stripe with logo, lashing brackets in the chassis edge, automatic jockey wheel… Available online only! Many variants available immediately Sales around the clock via our online shop at Sales by phone or on-site by appointment during opening hours Sales opening hours: Telephone orders Monday to Friday 8:00 to 12:30 and 14:00 to 18:00 Or 24/7 via our online shop at trailershop Lajdpfx Abspm Iwis Usk Content and images are subject to copyright – Logos are trademarked 03/25 2514-3-13-1563-J

Stanje: rabljeno, prevoženi kilometri: 666.394 km, moč: 309 kW (420,12 KM), prva registracija: 08/2015, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 03/2025, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, * Multifunction steering wheel * Sleeper bunk * Air conditioning Ljdpfx Abevhukhs Ueak * Walking floor hydraulics * Radio transceiver ---- Internal vehicle number: 9832 ---- Subject to errors and prior sale

Stanje: novo, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.035 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 1.475 mm, Leto izdelave: 2025, Oprema: ABS, * Humbaur Three-Way Tipper * HTK 10 50 24 * Year of manufacture: 2025 * Gross vehicle weight: 10,500 kg * Payload: 7,500 kg * Unladen weight: 3,000 kg * Overall dimensions: 6960 x 2550 x 1475 mm * Loading platform dimensions: 5035 x 2420 x 500 mm * Steel side walls: 500 mm high * Continuously height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electrical and compressed air connections on the drawbar * Storage compartment with 2 aluminium ramps integrated into the chassis frame * 8 t aluminium ramps available for additional €1,499 IMPORTANT!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend an inspection and assessment to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and checks are possible at any time by appointment and are expressly encouraged!!! Images may be similar and might include optional extras subject to additional charges. All stated interior dimensions are approximate. TRADE-INS ACCEPTED FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom location: 58285 Gevelsberg, Am Sinnerhoop 17 Lsdpsqnrtasfx Ab Ujak Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Laedpfx Ast Szcbsb Uok

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 112.000 km, moč: 213 kW (289,60 KM), prva registracija: 07/2021, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 4.420 mm, gorivo: dizel, barva: modra, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2021, Oprema: žerjav, Konfiguracija osi Lajdpexcvidjfx Ab Uek Vzmetenje: Zračno vzmetenje Prednja os: Krmiljena Teže Lastna teža: 10.130 kg Nosilnost: 7.870 kg Skupna dovoljena masa: 18.000 kg Funkcionalnost Dvigalo: HIAB X-HIDUO158 E-4, letnik 2021, za kabino Blagovna znamka nadgradnje: HIAB-Multilift XR10S3650 Črpalka: Da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Po dogovoru

Stanje: novo, številka stroja/vozila: ebf3f771e96394cd89e56bbb7, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Central-axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes screwed into the floor/external frame, each rated at 5 tons 2 additional pairs of lashing eyes screwed into the floor, each rated at 5 tons, in the corners Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter-shell fenders 1 plastic toolbox with shelf, dimensions 620mm (w) / 360mm (h) / 440mm (d), lockable with a padlock (padlock not included) Central-axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/Tread plate floor for high point load capacity Note: Minor floor waviness possible due to welding distortions! Platform length approx. 5,200 mm Rear slope approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, height 400 mm Sideboards 25 mm aluminum hollow profile, height 400 mm, foldable and removable Rear wall / rear corner posts Ledji Rixrspfx Ab Ujak 1 pair of steel posts attached to the frame with bracket for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Covered with 3 toothed steel rails With gas pressure springs for single-person operation Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Front wall: aluminum Sideboards: anodized aluminum Loading ramps: hot-dip galvanized Attention! These are archive images.

Stanje: novo, Buy online at trailer-shop.de Many models available online at ANHÄNGERWIRTZ Order conveniently online 24/7 Pick up yourself or have it delivered 😊 The online pickup market for your new trailer offers top brand manufacturers! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: Platform high-loader (flatbed) 605x200x30cm, 3500kg, braked, tandem axles, rubber suspension, V-frame chassis, 14" tyres, silver rims, flatbed with 30cm silver anodized aluminium sidewalls, folding and removable all around, centre stanchion, external recessed tension locks, noise-reducing DIN lashing brackets recessed into chassis edge, black steel rims, modern all-around lighting, automatic jockey wheel..... Invoice with itemised VAT, warranty included – Specialist trailer dealer for over 34 years Sales and order acceptance by phone during our business hours (Monday to Friday) or around the clock via our online shop at trailer-shop.de Copyright – Trademark protection 2025/10 Lsdjxrvzfopfx Ab Ujak

Stanje: novo, lastna masa: 2.250 kg, največja dovoljena obremenitev: 5.250 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.070 mm, širina tovornega prostora: 1.450 mm, višina nakladalnega prostora: 2.200 mm, vzmetenje: zrak, velikost pnevmatike: 215/75 r15,7, barva: oranžna, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, HUMBAUR 7.5 t Tandem Three-way Tipper with Ramp Compartment, Type HTK 754020 Premium INCLUDES HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES HOT-DIP GALVANIZED TIPPER BODY INCLUDES LOCKABLE RAMP COMPARTMENT WITH LID (privacy cover) Equipment: * Permissible total weight: 7,500 kg * Payload approx. 5,250 kg * Loading area approx. 4,000 x 2,030 mm * Unladen loading height approx. 920 mm * Overall dimensions: LxWxH approx. 6,070 x 2,200 x 1,450 mm * Tipper bed made from 4 mm fine-grain steel * Tipper body & chassis fully hot-dip galvanized * Side panels available in custom RAL color (optionally galvanized at extra charge) * Quality laser-welded steel side panels, 400 mm high * Side and rear panels foldable, removable, and swinging, with central locking; bolted and quickly removable rear stanchions, galvanized * Robust front wall made of galvanized steel, bolted and removable * Infinitely height-adjustable drawbar for coupling heights unladen approx. 560 - 900 mm * DIN bolt-type towing eye Ø 40 mm * Heavy-duty automatic jockey wheel Lajdpon Sl Htofx Ab Uok * 2 recessed 3 t lashing rings in the corners * 3 pairs of 1 t drop lashing shackles recessed in the outer frame * Tipping angle (side/rear): 45°/48° * 2 telescopic folding supports at the rear * Lockable storage compartment with plastic rollers for 2 optional ALU loading ramps integrated into the frame * Dual-circuit air brake system with ALB function * ABS braking system 24 Volts * Spindle parking brake * Hydraulic three-way tipping system, operated via towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limitation and safety cables; Hydraulic quick-coupling SVK BG3 as single-circuit connection * Mudguards with splash protection system * Chassis frame and drawbar hot-dip galvanized by immersion * Tyres 215/75 R17.5 * Maintenance-free parabolic suspension with load equalization * Electrics: 15-pin, 24 Volts * Brake connection: 2 color-coded (red/yellow) ISO 1728 coupling heads Your benefits: * Optimum corrosion protection through hot-dip galvanizing by immersion * Safe loading and unloading via telescopic folding supports at the rear * Simple and easy handling due to the patented safety system for ALU loading ramps * Ideal cargo securing options with standard lashing points * Infinitely height-adjustable drawbar enables compatibility with various towing vehicle coupling heights * Low tare weight => high payload Optional extras (at additional cost): * 1 pair ALU loading ramps (4.4 t/pair) with support legs at the rear, length approx. 3,050 mm x width approx. 400 mm (approx. 31 kg/unit) * Plastic toolbox mounted under the loading area * Galvanized side panels * Electric-hydraulic system 24 Volts with battery and remote control * Steel extensions, etc. *Stock unit – available immediately *Subject to prior sale *Ex-works price – Gersthofen

Stanje: novo, lastna masa: 11.400 kg, največja dovoljena obremenitev: 36.600 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck in SNT design for optimizing the loading deck length, approx. 3,700 mm long • Rear of gooseneck chamfered approx. 1,000 mm x 6° • Technical fifth wheel load: 18,000 kg • Suitable for tractor units: 4x2 or 6x2 Loading Platform: • Loading platform, approx. 9,400 mm long, with rear taper approx. 900 mm x 6° • Platform behind the gooseneck, hydraulically liftable and lowerable • Loading platform length approx. 3,000 mm; load capacity approx. 9,000 kg Ramps: • 1 pair of two-piece hydraulic steel ramps, approx. 4,350 x 900 mm • Hardwood covering • Hydraulically foldable ramp tips • Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 365 mm inward Axles and Suspension: • BPW axles and suspension, two rigid axles, one self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activatable via reverse gear and manually • Air suspension with lift and lower valve • Axle tool Tyres: • 235/75 R 17.5 3PMSF, twin tyres • Load index 143/141J (144/144F) Brake System: • Brake system by WABCO EBS-E, complies with EU regulations Lighting System: • 24-volt lighting system, "ASPÖCK-NORDIK full LED" (ASS 3) • Version complies with EU regulations Metallization: • Standard HRM metallization (High Resistance Metallization) of the outer frame • Complete steel structure shot-blasted, then defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) hot coated Painting: • 6-layer final treatment: • Complete steel structure shot-blasted after welding • One coat of zinc-based primer, one adhesion primer • Final paintwork: 2 coats of 2-component acrylic paint, single color in nova grey, then cavity sealing with special wax. Rims in silver. Steel Structure: • Steel structure made of high-strength fine-grained steels • Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1 Welding process: MAG according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Accessories included: • Plug-in steel front wall, approx. 400 mm high • Connecting strip for supply lines to the tractor unit, installed at the height of the outer frame profile • ASPÖCK-UNIBOX mounted on the connecting strip at the front with 24N, 24S, and 15-pin sockets Lsdjiuy Npepfx Ab Usak 24N connection according to ISO-1185 24S connection according to ISO 3731 15-pin connection according to ISO-12098 • 1 spare wheel with mounting adapter under the loading platform in front of the axles on the right • Park position on the gooseneck for warning panels when not in use • Outer carrier of the gooseneck with mounting holes for screw-in lashing rings First hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included (LC 5,000 daN) • One mounting hole on the rear upper area of the outer carrier of the gooseneck for a screw-in lashing ring 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of recessed lashing rings in the centre rear of the gooseneck (LC 5,000 daN) • 3 pairs of recessed lashing rings inside the gooseneck’s outer carrier (LC 5,000 daN) • 3 pairs of lashing rings in the centre of the gooseneck (LC 5,000 daN) • Approx. 40 mm hardwood flooring above the gooseneck • 2” king pin • On the gooseneck: 1 pair plug-in aluminium side walls, approx. 400 mm high, anodized design • On the gooseneck: 1 plug-in aluminium rear wall, approx. 400 mm high, anodized ...