Nizki nakladalnik

Humbaur 4-Achs-Tieflader HTD 40K- mit Radmulden

HTD 40K-RM-BM_2022
Technical Data:
Internal dimensions: approx. 9,220 mm x 2,540 mm x 0 mm
Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm
Gross weight permitted: 24,000 kg
Payload: approx. 15,350 kg
Tyres: 235/75R17.5 inch
Loading height: approx. 900 mm
Drawbar length: approx. 1,500 mm
Coupling height: approx. 820–1,000 mm
Ramp angle: approx. 10°
Ramp length: approx. 3,150 mm
Ramp width: approx. 750 mm
Gross weight (special approval): 40,000 kg
Payload (special approval): approx. 31,350 kg
Low-bed length: approx. 6,610 mm
Overall dimensions (LxWxH): 11,200 mm
Technical gross weight: approx. 44,000 kg
Axle load (technical): approx. 11,000 kg
4 pairs of lashing points, 10,000 kg per lashing point
Flush-mounted lashing rings in the low bed
3 pairs of lashing points, 10,000 kg per lashing point
4 pairs of lashing points, 2,000 kg per lashing point over wheel recess 3rd and 4th axles
Lashing points on the external frame of the low bed

Standard equipment:
Axles:
Low loader axles from well-known manufacturers
Tyres:
Hfjdpfx Aeiciutoffjn
Tyres according to manufacturer’s choice
Suspension:
Air suspension unit including raising and lowering, acting on the rear axle assembly
Braking system:
Braking system in accordance with EC directives with EBS 4S/3M, multi-voltage version (12–24V), spring-loaded parking brake incl. 2 test ports accessible from outside for brake/modulator and airbag pressure
Electrical system:
LED lighting with indicator function for side marker lights, multi-voltage (12–24V)
Turntable:
Robust welded construction with low-maintenance slewing ring
Towing gear:
Cranked drawbar with Ø 50 mm towing eye, low-maintenance silent bushings, including height adjustment for the drawbar
Chassis frame:
Robust welded construction made from high-strength fine grain steel
Continuous cross members for maximum stability
Front wheel recesses (length at top approx. 2,500 mm – depth approx. 410 mm) and rear (length at top approx. 1,470 mm – depth approx. 370 mm); without wheel recess covers
Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm)
Wheel cut-outs over the rear wheels with a 2,010 mm wheelbase, front corners chamfered
Rear climbing strips on the drive-on slope for maximum safety during loading and unloading
Floor:
50 mm softwood floorboards (painted/impregnated)
Ramps:
One-piece hot-dip galvanised drive-on ramps (3,150 mm x 750 mm) with 50 mm softwood flooring (painted/impregnated), laterally adjustable, direct-acting upright spring lifts for effortless operation
Optimal securing via turnbuckle and counter stop
Corrosion protection:
Chassis frame hot-dip galvanised in immersion bath
Support:
2 foldable supports at the rear left and right of vehicle
Equipment:
Folding side underrun protection
Front half-round mudguards made of plastic; rear straight steel mudguards with antispray function
2 wheel chocks with holders; contour marking in accordance with ECE Regulation R48
=> Plus much more
=> Delivery freight costs: €2.90 plus VAT per km
=> Prices ex works: D-86368 Gersthofen
Your direct contact:
Mr. Hirn Tel. 0911/830504
DOLL FAHRZEUGBAU
*Subject to prior sale and changes!*
*Price valid ex works D-86368 Gersthofen*
*Images may vary and serve only as a general guide; accessories shown may be available at an additional cost*

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.