Humbaur Nizki Nakladalnik nakup rabljenega (612)

Stanje: novo, lastna masa: 7.500 kg, največja dovoljena obremenitev: 32.500 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, naslednji pregled (TÜV): 03/2023, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, TOP EQUIPMENT – INCLUDING THE FOLLOWING ACCESSORIES: Gkodpfx Afsglbllj Rjb Chassis frame hot-dip galvanized in immersion bath Front storage box on platform, with hinged lid Rear storage box on platform, with hinged lid Recess for excavator arm storage, lowbed – rear section 3 m equipment package without ramp incline Warning package for special permit Steel sheet toolbox Stake pocket set in outer frame Basic hydraulics for truck with rear connection Hydraulic ramp lift for one-piece ramps Hydraulic lateral ramp shift Hydraulic support legs left and right 1 pair of 6t lashing rings bolted to outer frame WABCO Smart Board pre-configured Complete SSV front left HTD409525K COC certificate of conformity OPTIONAL Rubber flooring on ramp €1,890 net Rubber flooring on the incline €1,250 net Adjustable drawbar 40 / 50 DIN

Stanje: novo, lastna masa: 4.800 kg, največja dovoljena obremenitev: 14.200 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 1.400 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR 19 t Construction Machinery Transporter Tandem Flatbed with TWIN TYRES REAR LOADING AREA TAPERED HBTZ 196524 BS / Hot-dip galvanized / Side aluminum drop sides with CENTRAL STANCHIONS Chassis frame hot-dip galvanized by immersion Side drop sides made of anodized aluminum with GALVANIZED CENTRAL STANCHION HOT-DIP GALVANIZED STEEL FRONT WALL INCLUDES: - SAF low bed axles - SPRING-ASSISTED RAMP LIFTER EQUIPMENT: • AIR SUSPENSION with raising and lowering function • SAF low bed axles • TWIN TYRES 235/75 R17.5 • EBS Electronic Braking System • 6 recessed 10 t lashing rings in platform floor • 14 recessed 2 t lashing rings in outer frame • Front support: reinforced 25 t (static) gear support leg with load and rapid gear Gksdpfx Aofi D Epsf Rob • Rear support: 2 foldable supports on chassis frame • Loading ramps approx. 3,100 mm long and approx. 750 mm wide, laterally adjustable, hot-dip galvanized by immersion • Platform floor with wooden cover and STEEL tear plate above the wheels • WOODEN COVER in the loading ramps • SPRING-ASSISTED RAMP LIFTER • ALUMINUM DROP SIDES with galvanized CENTRAL STANCHIONS • HOT-DIP GALVANIZED STEEL FRONT WALL • Low loading height: only approx. 960 mm • Continuously height-adjustable drawbar • Coupling height approx. 800 - 1,000 mm • DIN towing eye Ø 50 mm • Rear loading area tapered • Mudguards with antispray system Optional, at extra charge: • Plastic toolbox under the loading platform • Surcharge: 290,- Euro plus VAT => Delivery freight charges: 2.90 Euro plus VAT per km => Prices are ex-works D-86368 – Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale to business customers only!* *Images may differ and are only for general guidance => may contain/show accessories at extra charge*

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS => APPROX. 750 MM WIDE LOADING RAMPS => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge* Gjdpjd U A Tgsfx Af Rekb

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 23.350 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE LOWBED TRAILER => FULL AIR SUSPENSION (front and rear) => HOT-DIP GALVANIZED Permissible total weight: 30,000 kg Payload: approx. 23,350 kg Chassis frame hot-dip galvanized via immersion bath Air suspension SAF axle with drum brake EBS electronic braking system Tyres: 235/75R17.5 – 12 units Lowbed length: approx. 6,500 mm 3 pairs of 10 t lashing rings recessed in the lowbed 2 pairs of 10 t lashing rings recessed in the highbed 4 pairs of 3 t lashing points on the outer frame 3 pairs of 6 t lashing eyes on the outer frame 6 pairs of stake pockets 90 x 50 mm in the outer frame Toolbox at the front, top of the platform with hinged lid 3-metre widening package without incline, with fold-out supports Spring ramp lifter 4 x warning panels Rotating beacon Storage compartment under the loading floor 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for loading area and ramps Optional extras if required: Hydraulic ramp lifter €2,690.00 + VAT => Delivery freight cost: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. Gkedpehmm N Uefx Af Rob DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general guidance only => may show/accessories subject to surcharge*

Stanje: novo, lastna masa: 9.650 kg, največja dovoljena obremenitev: 30.350 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION Gedpfxshvxgzs Af Rekb => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => ANTI-SLIP STRIPS ON THE REAR INCLINE OF THE RAMPS => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR SECTION => LONG ONE-PIECE LOADING RAMPS => LOW APPROACH ANGLE Perm. gross vehicle weight 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized in immersion bath Bogie frame hot-dip galvanized in immersion bath Loading ramps hot-dip galvanized in immersion bath Air suspension SAF axles with drum brakes EBS electronic braking system Tyres 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Trough for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear section of lowbed 4 pairs of 10 t recessed lashing rings in lowbed 2 pairs of 10 t recessed lashing rings in highbed 4 pairs of 3 t lashing points in external frame of lowbed 3 pairs of 6 t lashing eyes on external frame 4 pairs of stake pockets in outer highbed frame 4 pairs of stake pockets in outer lowbed frame 3-metre widening package with folding outriggers, without slope 4 warning signs with lighting Rotating warning beacon at rear LARGE STEEL TOOLBOX under cargo bed 2 storage compartments with folding covers in high platform Hydraulic ramp lifters 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for cargo bed and ramps 40,000 kg GVWR only with exemption permit according to §70 => Freight costs for delivery: €2.90 plus VAT per km => Prices ex D-86368 – Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex D-86368 – Gersthofen* *Sale to business customers only!* *Images may differ and are for rough orientation only => images may show/contain accessories subject to extra charge*

Stanje: novo, lastna masa: 3.900 kg, največja dovoljena obremenitev: 9.700 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.450 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, medosna razdalja: 1.270 mm, Leto izdelave: 2026, Oprema: ABS, spojka prikolice, HBTZ 137224 BS Tandem poševno odrezan 400 mm aluminijaste bočne stene Zadaj poševno odrezana nakladalna površina Višina nakladanja 870 mm Gjdpfx Afjgi H Dpe Rjkb Preme priznanega proizvajalca z zračnim vzmetenjem ABS Višinsko nastavljiva vlečna roka Enodelne vzmetne nakladalne rampe 3 pari 10 t pritrdilnih točk 8 parov 2 t pritrdilnih točk Popolnoma pocinkano Pnevmatike 205/65 R 17,5

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, HS 105020 BS 10145 / SMB with Grating Surface on Ramps ++ Delivery possible, freight costs on request ++ Technical Data: Loading height: 705 mm Ramp angle: 16° Tyres: 235/75R17.5 Equipment: ABS CHASSIS FRAME INCLUDING SIDE WALLS AND DRAWBAR FULLY HOT-DIP GALVANIZED HEAVY-DUTY SMB AXLES WITH SOLID PARABOLIC SUSPENSION AXLE UNIT WITH LOAD EQUALIZATION 4 RECESSED AND FORGED LASHING POINTS IN THE CORNERS 12 LASHING EYES INTEGRATED INTO THE OUTER FRAME CONTINUOUSLY HEIGHT-ADJUSTABLE COUPLING DEVICE Gedpfxjwkt Hls Af Rekb ACCESS RAMPS WITH ROBUST, HOT-DIP GALVANIZED STEEL GRATING SURFACE FOR SUPERIOR GRIP TAILLIGHTS PROTECTED AND INTEGRATED INTO THE UNDERRUN PROTECTION EXTRA-HIGH CORNER POSTS FOR SECURE SUPPORT OF THE ACCESS RAMPS ROBUST, HOT-DIP GALVANIZED STEEL MUDGUARDS 2 FOLDABLE AND TELESCOPIC SUPPORT LEGS AT THE REAR ALUMINIUM SIDE IMPACT PROTECTION FROM START OF LOADING AREA TO 1ST AXLE HEAVY-DUTY GEAR SUPPORT WINCH WITH LOAD AND QUICK MODE LOW LOADING HEIGHT 235/75 R17.5 INCH TYRES …and much more Loose accessories available as options. - - all information without guarantee - - Images may differ - -

Stanje: novo, lastna masa: 10.650 kg, največja dovoljena obremenitev: 39.350 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.830 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 5-AXLE SWIVEL-DOLLY LOWBED TRAILER, HOT-DIP GALVANIZED => FULL AIR SUSPENSION => HOT-DIP GALVANIZED IN TOP CONFIGURATION!! * LIFT AXLE * SELF-STEERING AXLE • SAF – LOWBED AXLES • AIR SUSPENSION • ONE-PIECE LONG ACCESS RAMPS • HYDRAULIC RAMP LIFTER • HYDRAULIC REAR SUPPORTS • HYDRAULIC SIDE SHIFT • HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE • EXCAVATOR ARM TROUGH • CHASSIS AND TURNABLE FRAME HOT-DIP GALVANIZED • OUTER FRAME ADDITIONALLY PAINTED IN RED • RAMPS HOT-DIP GALVANIZED • 10 t LASHING POINTS RECESSED IN DECK • 3 t LASHING POINTS IN OUTER FRAME (HIGH DECK) • 6 t LASHING POINTS IN OUTER FRAME (LOWBED) • 4 PAIRS OF 3 t LASHING POINTS IN OUTER FRAME (LOWBED) • LASHING POINTS IN EXCAVATOR ARM TROUGH • 3 METER WIDENING PACKAGE • FOLDING SUPPORT ARMS • WOODEN BOARDS IN STEEL BOX UNDER THE DECK • SECOND STEEL TOOLBOX UNDER THE DECK • WARNING SIGNS • REVOLVING BEACON AT REAR • ANTI-SLIP STRIPS AT REAR • 2 TOOLBOXES IN HIGH DECK • DIGITAL AXLE LOAD DISPLAY • WABCO SMARTBOARD • AIR SUSPENSION • LIFT-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING/UNLOADING) • STAKE POCKETS IN OUTER FRAME • TWO STAKE POCKETS INCLUDING INSERTABLE STAKES AT FRONT WALL • EBS – ELECTRONIC BRAKING SYSTEM B-DIMENSION = approx. 11,790 MM => Freight charges for delivery: €2.90 plus VAT per km => Prices valid ex D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL VEHICLE MANUFACTURING Gkodehmm Rcspfx Af Rsb *Intermediate sale and changes reserved!* *Price valid ex D-86368 - Gersthofen* *Sales to business customers only!* *Images may differ and serve only for general orientation => may include/show accessories for an additional charge*

Stanje: novo, lastna masa: 4.800 kg, največja dovoljena obremenitev: 16.200 kg, skupna masa: 21.000 kg, dolžina tovornega prostora: 6.540 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, Leto izdelave: 2026, Oprema: ABS, Air suspension with lift/lower function SAF low-bed trailer axles Twin tyres 235/75 R 17.5 EBS electronic braking system 6 flush-mounted 10 t lashing rings in the floor 14 lashing rings (2 t) in the outer frame Gearbox support winch with load and fast gear Rear support: 2 foldable supports on the chassis frame Ramps approx. 3100 mm long and approx. 750 mm wide, laterally adjustable Decking with wooden flooring and steel chequer plate above the wheels Godei Dqn Repfx Af Rjkb Wooden flooring in the ramps Spring-assisted ramp lifters Aluminium side walls with central stanchions Hot-dip galvanised steel front wall Stepless height-adjustable drawbar Coupling height approx. 800 - 1000 mm DIN drawbar eye d= 50 mm Rear loading area tapered Mudguards with antispray system Additional equipment available on request at any time Collection ex works or delivery Price per km: €2.90

Stanje: kot nova (razstavni stroj), lastna masa: 10.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 4x2, dolžina tovornega prostora: 9.220 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible total weight special approval: 40,000 kg Payload special approval: approx. 30,000 kg Low bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical overall weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low bed Suspension Air suspension unit including raising and lowering effective on the rear axle unit Braking system Braking system according to EC directives with EBS 4S/3M in multivoltage version (12-24V), spring-loaded parking brake incl. 2 external test connections for brakes/modulator and bellows pressure Gkedoiciutjpfx Af Rjb Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball race turntable Towing device Cranked drawbar with towing eye Ø 50mm, low-maintenance silent bushings including height adjustment for drawbar Frame Robust welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (top length approx. 2,500 mm - depth approx. 410 mm) and at the rear (top length approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers; Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with wheelbase 2,010 mm, front corners chamfered, rear climbing bars on the incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame high bed 1 pair of stake pockets (90x50 mm) in the outer frame low bed Floor 50 mm softwood planking (painted/impregnated) Ramps One-piece hot-dip galvanised loading ramps (3,150 mm x 750 mm) with 50 mm softwood planking (painted/impregnated), laterally adjustable, directly acting upright spring lifters for effortless operation Finishing Chassis frame hot-dip galvanised in immersion bath Support 2 folding supports at the rear left and right at the vehicle rear Equipment Folding side underrun protection, front semicircular plastic mudguards – rear straight steel mudguards with antispray, 2 wheel chocks with holders; contour markings in accordance with ECE Directive R48 Front wheel recess cover with 3 pairs of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00888 Hardwood planking for front wheel recess cover Rear wheel recess cover with 1 pair of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00897 Hardwood planking for rear wheel recess cover 3 pairs of screwed lashing rings 6 t 3 m equipment package without incline B=11,200 Folding extension with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning boards 4-fold, electrics and revolving beacon 1 pair of storage compartments for wooden boards 3 m package (2 pieces moun

Stanje: rabljeno, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, skupna dolžina: 8.170 mm, skupna širina: 1.400 mm, skupna višina: 2.550 mm, barva: modra, Leto izdelave: 2016, Lastna teža: 3.020 kg Nosilnost: 8.880 kg Dovoljena skupna masa: 11.900 kg Gksdpfx Ajzzyfgsf Rsb

Stanje: novo, lastna masa: 1.700 kg, največja dovoljena obremenitev: 4.800 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215/75 r17,5 zoll, medosna razdalja: 850 mm, Leto izdelave: 2023, HUMBAUR Construction Machinery Tandem Low-Loader HS 654520 BS INCLUDES ALUMINIUM loading ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Specification: • Permissible total weight: 6,500 kg • Payload approx. 4,800 kg Gkodpfx Ashmm Rrsf Rsb • Loading area approx. 4,500 x 2,000 mm • ALUMINIUM loading ramps • Continuously height-adjustable drawbar • Automatic jockey wheel • 6 pcs. 3 t lashing rings (in the corners) • 10 pcs. 2 t recessed lashing points in the outer frame • 2 adjustable support legs at the loading ramps • Dual-circuit air brake system with ABS • Steel mudguards • Platform floor made of softwood planks • Chassis frame hot-dip galvanized in an immersion bath • Tires: 215/75 R17.5 Your advantages: • Low loading and construction height • Optimum corrosion protection thanks to hot-dip galvanizing by immersion • Safe loading and unloading thanks to supports at the ramps • Simple and easy handling of the aluminium ramps • Ideal load securing options thanks to standard lashing points • The continuously height-adjustable drawbar enables compatibility with various towing vehicle coupling heights • Low tare weight, thus high payload capacity => Freight costs for delivery: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and change.* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!*

Stanje: novo, lastna masa: 1.600 kg, največja dovoljena obremenitev: 4.900 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215/75 r17,5 zoll, medosna razdalja: 850 mm, Leto izdelave: 2023, Oprema: ABS, HUMBAUR Tandem Low-Loader Trailer for Construction Machinery HS 654020 BS INCLUDES ALUMINIUM Loading Ramps at Rear HOT-DIP GALVANIZED CHASSIS FRAME Features: • Permissible gross weight: 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Loading ramps made of ALUMINIUM • Fixed towing bar • Automatic jockey wheel • 4 x 3 t lashing rings (at the corners) • 10 x 2 t recessed lashing points in the outer frame • Two-circuit air brake system with ABS • Steel mudguards • Platform floor made from softwood planking • Chassis frame hot-dip galvanized by immersion • Tyres 215/75 R17.5 Your benefits: Godpfx Afshmm Rys Rekb • Low deck height / overall height • Optimum corrosion protection thanks to hot-dip galvanization by immersion • Safe loading and unloading due to supports at the loading ramps • Easy and lightweight handling of the aluminium ramps • Ideal cargo securing options with standard lashing points • The infinitely adjustable height towing bar enables compatibility with different coupling heights of towing vehicles • Low net weight = high payload => Delivery charges: €2.90 plus VAT per km => Prices ex-works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL Fahrzeugbau *Subject to prior sale and technical changes!* *Price valid ex-works D-86368 Gersthofen* *Sale to business customers only!*

Stanje: novo, lastna masa: 1.500 kg, največja dovoljena obremenitev: 3.500 kg, skupna masa: 5.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215, medosna razdalja: 850 mm, Leto izdelave: 2023, Oprema: ABS, HUMBAUR Construction Equipment Tandem Low Loader HS 654020 BS INCLUDES ALUMINIUM Loading Ramps at Rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: • Permissible gross weight: 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Loading ramps made of ALUMINIUM Gkjdpfshmm Rvex Af Rob • Height-adjustable drawbar • Automatic jockey wheel • 4 units 3 t lashing rings (in the corners) • 10 recessed 2 t tie-down points in outer frame • Dual-circuit air brake system with ABS • Steel sheet mudguards • Platform floor made from softwood planks • Chassis frame hot-dip galvanized by immersion bath • Tires 215/75 R17.5 Your benefits: • Low loading and construction height • Optimum corrosion protection through immersion hot-dip galvanization • Safe loading and unloading due to supports on the loading ramps • Simple and lightweight handling of the aluminium loading ramps • Ideal load securing options thanks to standard lashing points • Continuously height-adjustable drawbar enables compatibility with various coupling heights of towing vehicles • Low dead weight => thus, high payload

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 10.000 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2026, Oprema: ABS, HUMBAUR Construction Machine Transporter Tandem Flatbed REAR LOADING AREA ANGLED DOWNWARDS HBT 136224BS / Hot-dip galvanized / Aluminium side panels Gjdpfjhmm Rkox Af Rokb Chassis frame hot-dip galvanized in immersion bath Aluminium side panels anodized Equipment: • Tandem low-loader (construction machine/material transporter) • Rear loading area with downward slope • Permissible total weight: 11,900 kg • Payload: approx. 9,010 kg • Loading area: approx. 6,200 x 2,460 mm • Platform floor made of approx. 40 mm softwood planks • Aluminium side panels, 400 mm high, anodized • Reinforced 25 t gearbox support winch with load and rapid gear • Fixed drawbar • Coupling height: approx. 750 - 1,000 mm • 3 pairs of recessed 3 t lashing rings (3,000 daN) • 6 pairs of recessed 1 t lashing points (1,000 daN) in outer frame • 2 telescopic folding supports at the rear • ABS dual-circuit air brake system • One-piece ramps, hot-dip galvanized, approx. 2,400 mm long and approx. 520 mm wide, with galvanized STEEL GRATING • Mudguards • Anti-spray system • Ø 40 mm DIN towing eye • Aluminium side underrun protection • Approach angle only approx. 16° • Unladen loading height only approx. 920 mm Optional at extra cost: • Plastic toolbox under loading area • Extra charge: €290 plus VAT. => Delivery freight costs: €2.90 plus VAT per km => Prices ex D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL Vehicle Manufacturing *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale to commercial customers only!* *Images may differ and are for general reference only => may show accessories at extra cost*

Stanje: novo, lastna masa: 5.680 kg, največja dovoljena obremenitev: 18.320 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, Leto izdelave: 2026, Oprema: ABS, Three-axle trailer BPW low-loader axles Electronic air suspension with 2 ride heights Lowering function for safe loading Brake system compliant with EC regulations with 2S/2M Drawbar with 50 mm towing eye Raising and lowering of the drawbar 8 pairs of 10 t lashing rings recessed in the low-bed 6 pairs of 2 t lashing points above wheel cutouts 5 pairs of 3 t lashing/pocket sockets for 90x50 mm stanchions 50 mm softwood floor Chassis frame hot-dip galvanized by immersion bath Foldable side underrun protection Stanchion pocket package in outer frame One-piece hot-dip galvanized access ramps Gsdpfsh I H Ddex Af Rokb Laterally adjustable Direct-acting vertical spring supports

Stanje: rabljeno, največja dovoljena obremenitev: 13.800 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, skupna širina: 2.550 mm, skupna višina: 1.710 mm, Oprema: dvižna zadnja plošča, Humbaur HTK 185524 Tandem Three-Way Tipper Air Suspension First Registration: 08.01.2019 Gedpfx Aoxzx E Sef Rokb Inspection (HU): 09/2026 Gross Vehicle Weight: 18,000 kg Unladen Weight: 4,660 kg Payload: 13,340 kg Overall Dimensions: 7,520 mm x 2,550 mm x 1,820 mm Internal Dimensions: 5,500 mm x 2,420 mm x 600 mm Platform KTL Coated Side Panels and Chassis Hot-Dip Galvanized 50 mm Coupling Eye Axles with Drum Brakes Maintenance-Free Parabolic Suspension for Optimal Load Equalization Air Brake System with Release Valve Compressed Air Coupling Heads (red/yellow) Automatic Anti-Lock System (ABS) EBS Brake System High-Quality Steel Drop Sides, Side and Rear Foldable, Removable and Swinging 2 Rear Stabilisers Central Locking Detachable Front Wall Lashing Points in Platform Floor Reinforced 12t Gearbox Support Winch with Load and Rapid Mode Galvanized Central Tube, Continuously Adjustable via Crank Extra-Wide Single Tyres for Low Ground Pressure LED Side Marker Lights Motor-Hydraulic Three-Way Tipping System Tyres: 435/50 R19.5 Stake Pocket Side Panel Spring Loading Ramps available at an extra cost of €1,500 19% VAT deductible. ATTENTION !!!!! PLEASE READ !!!! We expressly reserve the right to prior sale, as this item is also listed on other marketplaces. We strongly recommend inspection and examination to avoid any misconceptions regarding the condition and suitability by the buyer. Inspections and checks are possible at any time by appointment and are expressly welcomed!!! Illustrations may be similar and contain optional, chargeable accessories. The stated internal measurements are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening Times: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, lastna masa: 2.500 kg, največja dovoljena obremenitev: 8.400 kg, skupna masa: 10.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 250 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, Construction Machinery Tandem Low Loader HS 115020BS Godpfxshmm Rno Af Rekb HOT-DIP GALVANIZED Equipment: • Permissible total weight: 10,900 kg • Payload approx. 8,410 kg • Loading area approx. 5,000 x 2,010 mm • Loading ramps with grating surface, hot-dip galvanized • Fixed drawbar • Reinforced 25 t mechanical support winch with load and fast gear (no jockey wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair) • 2 folding supports at the rear of the vehicle • ABS braking system • Steel mudguards, hot-dip galvanized • Decking made of wood • Chassis frame including superstructure hot-dip galvanized (immersion bath) => Freight costs for delivery: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex works D-86368 Gersthofen* *Images may differ and are for general reference only — may show/contain optional accessories at additional cost*

Stanje: rabljeno, skupna masa: 3.500 kg, prva registracija: 05/2019,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WHD304118V0110543, lastna masa: 530 kg, največja dovoljena obremenitev: 2.470 kg, skupna masa: 3.000 kg, prva registracija: 11/1997, naslednji pregled (TÜV): 07/2027, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 1.800 mm, skupna dolžina: 4.495 mm, skupna širina: 1.865 mm, vzmetenje: jeklo, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 1997, Robusten Humbaur osebni priklopnik (1997) – idealen za obrtnike in vrtnarje! Priklopnik je rabljen, vendar v solidnem stanju in deluje brezhibno. Zaradi svoje stabilne konstrukcije je popoln za vsakodnevno uporabo v obrtništvu, za vrtnarstvo ali za zahtevne prevoze okoli hiše (drva, zeleni odrez, gradbeni material ipd.). Glavne informacije in poudarki: Znamka: Humbaur Letnik: 1997 Stanje: Rabljeno, z znaki uporabe zaradi starosti, a popolnoma funkcionalno. Najsodobnejša povratna zavora. Gsdpfxezhxzao Af Rjkb Področje uporabe: Idealen za vrtnarje, obrtnike ali domače mojstre Stabilna izdelava in zanesljive vozne lastnosti Priklopnik si je po dogovoru mogoče ogledati.

Stanje: novo, konfiguracija osi: 2 osi, skupna širina: 25.500 mm, skupna višina: 32.600 mm, Oprema: ABS, Humbaur HBT 106224 BS Basic, tapered rear Technical Data: - Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm - Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm - Permissible total weight: 11,900 kg - Payload: approx. 9,100 kg - Wheelbase: 990 mm - Tyres: 235/75 R17.5 - Loading height: approx. 920 mm - Drawbar length: approx. 1,800 mm - Coupling height: approx. 750–1,000 mm - Approach angle: approx. 16° - Ramp length: approx. 2,600 mm - Ramp width: approx. 540 mm - 3 pairs of lashing rings, 3,000 kg per lashing point (recessed in the platform floor) - 7 pairs of lashing rings, 1,000 kg per lashing point (integrated in the outer frame) Standard Equipment: - Axles: Axles from renowned manufacturers - Suspension: Low-maintenance parabolic suspension with load equalisation - Tyres: Manufacturer’s choice on steel rims - Brake System: ABS system in accordance with ECE regulations, with ALB function, ISO 7638 ABS connector, spindle handbrake, two interlocked coupling heads (red/yellow) ISO 1728 - Towing Device: Drawbar tube with DIN screwed towing eye Ø 40 mm, galvanised, infinitely adjustable via crank - Electrics: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector - Chassis: Robust, welded and hot-dip galvanised frame, rear area tapered with 12° incline - Floor: 40 mm softwood floor boards - Sidewalls: Anodised aluminium, drop and removable sides, galvanised corner posts, plug-in at front and rear - Ramps: 2 foldable, one-piece steel ramps, galvanised and laterally adjustable, each fitted with a gas strut, ramp securing at rear post, ramp surface made of galvanised grating - Supports: Reinforced 12 t gearbox support winch with load and quick mode, two telescopic folding supports left and right at rear - Additional Features: Steel mudguards with anti-spray mats, side underrun protection up to 1st axle (folding), 2 wheel chocks with brackets, reflective contour marking on sides and rear, space for two-line license plate on left ramp Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. [number]) will be pleased to assist you. For more information, please visit our homepage. Gedpfx Aeyfvg Aef Rjkb ... Subject to errors, changes, and prior sale! = Further Information = GVW: 11,900 kg Contact Tobias Ebert for further information.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 03/2025, skupna dolžina: 86.000 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, barva: siv, Leto izdelave: 2025, Lastna teža: 3.290 kg Nosilnost: 11.110 kg Največja dovoljena masa: 14.400 kg Višina tovorne površine: 80 cm Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Humbaur 2-osni priklopnik s središčno osjo in nizko tovorno platformo z nakladalnimi rampami – nov in nerabljen Ponujamo vam ta visokokakovosten 2-osni priklopnik s središčno osjo in nizko tovorno platformo proizvajalca Humbaur, v novem in nerabljenem stanju. Ta robusten priklopnik je bil posebej zasnovan za profesionalni transport gradbenih strojev, viličarjev, teleskopskih nakladalnikov, dvižnih ploščadi, kolesnih nakladalnikov, mini bagerjev in drugih težkih strojev. Zahvaljujoč popolnoma pocinkani konstrukciji je priklopnik odlično zaščiten pred korozijo in se odlikuje z dolgo življenjsko dobo ter minimalnimi stroški vzdrževanja. Oprema * Humbaur 2-osni priklopnik s središčno osjo in nizko tovorno platformo * Nov in nerabljen * Popolnoma pocinkano podvozje * Robustna jeklena konstrukcija * Nastavljiva vlečna kljuka * Aluminijaste stranske stene * Številne pritrdilne točke/kavlji na tovorni površini * Zadnji oporniki za varno nakladanje in razkladanje * Močne nakladalne rampe zadaj * Profesionalna izvedba za vsakodnevno uporabo * Konstrukcija, ki zahteva minimalno vzdrževanje ## Tehnični podatki ### Tovor na površina * Notranja dolžina: 6.300 mm * Notranja širina: 2.460 mm * Višina tovorne površine: pribl. 800 mm Nakladalne rampe * Dolžina: 3.200 mm * Širina na rampo: 1.120 mm Ekstra dolge nakladalne rampe omogočajo zelo plitev nakladalni kot in so idealne za stroje z majhno oddaljenostjo od tal. Teže * Dovoljena skupna masa: 14.400 kg * Lastna teža: 3.290 kg * Nosilnost: 11.110 kg Serijska oprema * Aluminijaste stranske stene * Nastavljiva vlečna kljuka * Popolnoma pocinkano podvozje * Številne pritrdilne točke * Zadnji oporniki * Močne jeklene nakladalne rampe * Popolna osvetlitvena naprava v skladu z direktivami EU * Zelo stabilno vedenje pri vožnji * Primerno za profesionalno, stalno uporabo Možnosti uporabe Idealno primerno za transport: * Bagerjev * Mini bagerjev * Kolesnih nakladalnikov * Kompaktnih nakladalnikov * Viličarjev * Teleskopskih nakladalnikov * Dvižnih ploščadi * Gradbenih strojev za gradnjo cest * Kmetijskih strojev * Ostalih gradbenih strojev Zakaj Humbaur? Humbaur je eden vodilnih proizvajalcev profesionalnih priklopnikov v Evropi in stoji za: * Nemško vrhunsko kakovostjo * Najvišjo zanesljivostjo * Dolgo življenjsko dobo * Visoko vrednostjo pri prodaji * Odlično izdelavo * Nizkimi stroški vzdrževanja Ta nov in nerabljen 2-osni priklopnik s središčno osjo in nizko tovorno platformo proizvajalca Humbaur prepriča s svojo robustno konstrukcijo, nizko višino tovorne površine, visoko nosilnostjo ter dolgo življenjsko dobo, ki jo zagotavlja pocinkana konstrukcija. S tem je idealna rešitev za gradbena podjetja, podjetja za najem strojev, trgovce s stroji in transportna podjetja. Gkjdpfozxgmfsx Af Rjb Ogled priklopnika je možen po predhodnem dogovoru v Andelstu, Nizozemska. Pogoji dostave: EXW Andelst, Nizozemska. Cena: Po dogovoru.

Stanje: novo, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, barva: srebrn, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, 1 day: €135 3 days: €370 1 week: €660 1 month: €1,950 Loading dimensions: 500 cm x 201 cm x 30 cm with loading ramps 11.5 Gkedpoin Ia Rsfx Af Rsb Construction Machinery Tandem Low Loader HS 115020BS HOT-DIP GALVANIZED Equipment: • Permissible total weight, kg • Payload approx. kg • Loading area approx. 5000 x 2010 mm • Loading ramps with grating, hot-dip galvanized • Fixed drawbar • Reinforced 25 t gearbox support winch with load and fast speed (no jockey wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair) • 2 drop-down support legs at the rear of the vehicle • ABS braking system • Steel mudguards, hot-dip galvanized • Decking made from timber flooring • Chassis frame including superstructure hot-dip galvanized by immersion

Stanje: novo, največja dovoljena obremenitev: 9.100 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.550 mm, skupna višina: 3.260 mm, Leto izdelave: 2026, Oprema: ABS, Humbaur HBT 106224 BS Heavy-Duty Low Loader Tandem Flatbed Trailer Standing Planks New Vehicle Overall Dimensions (mm): 8400 x 2550 x 3260 Internal Dimensions (mm): 6200 x 2450 x 400 Loading Height: 920 mm Gross Vehicle Weight: 11,900 kg Unladen Weight: 2,800 kg Payload: 9,100 kg Tyres (inch): 235/75 R 17.5 Ramps (mm): 2600 x 540 Beacon at Ramp (optional) Reversing Lights (optional) 2x Toolboxes CHASSIS: - Axles from renowned manufacturers - Maintenance-free parabolic suspension with load equalisation - Tyres according to manufacturer selection - Tyre Pressure Monitoring System (TPMS) including auto-locate BRAKING SYSTEM: Gkedpfx Ajwfmgbjf Rjb - EBS braking system according to ECE regulations - 2 non-interchangeable coupling heads red/yellow ISO 1728 - Spring-loaded parking brake ELECTRICS: - 24-volt lighting system with LED multi-chamber rear lights and flashing LED side marker lights - 15-pin connector for lighting DRAWBAR: - Galvanised drawbar with bolted towing eye Ø 40 mm - Coupling height steplessly adjustable via crank CHASSIS FRAME: - Heavy-duty, welded, hot-dip galvanised chassis frame - Loading area rear section chamfered - Floor covering: 40 mm softwood planks, painted/impregnated BODY: - Aluminium sidewalls, anodised, 400 mm high, fold-down and removable on sides - Corner posts galvanised, plug-in at front and rear LOAD SECURING: - 7 pairs of 2t lashing points on outer frame - 3 pairs of 6t recessed lashing points in deck SUPPORT SYSTEM: - Reinforced 12t gearbox support winch with load and quick mode - 2 telescopic folding supports at rear left/right RAMPS: - 2 foldable one-piece steel ramps, galvanised, laterally adjustable - Ramp lifter (1 gas strut per ramp) - Ramp safety on rear corner posts - Ramps with grating surface EQUIPMENT: - Galvanised steel mudguards with anti-spray system - Side underrun protection up to first axle, foldable - Contour marking on side and rear - 2 wheel chocks with holder, space for double-line number plate ATTENTION!!!! PLEASE READ!!!! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend viewing and inspection so that there are no misunderstandings regarding condition and suitability. Viewings and inspections are possible anytime by appointment and are expressly encouraged! Images similar, may contain optional extras subject to surcharge. Internal dimensions are approximate values. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE AND BALANCE PAYMENT POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 to 17:00, Saturday 8:30 to 14:00 Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, lastna masa: 510 kg, največja dovoljena obremenitev: 1.990 kg, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,4 m³, barva: drugo, gradbena višina: 2.800 mm, delovna širina: 1.913 mm, Manufacturer: Humbaur Model: Flatbed Trailer HT 253115 Permissible total weight: 2,500 kg Payload: 1,990 kg Unladen weight: 510 kg Body dimensions: 3,100 x 1,850 x 350 mm With high tarpaulin and frame, 200 cm internal height, including digital UV-protected printing on all 4 sides High-quality truck tarpaulin, 680 g/m² Tires: 15 inch Loading height: 735 mm Only premium truck-grade tarpaulin (680 g/m²) is used. The color of the tarpaulin is freely selectable (color charts available by email upon request). Special sizes and custom versions can be offered at any time. Lettering is available in stencil screen print or digital print. We are happy to provide you with an individual quote. V-drawbar, hot-dip galvanized 13-pin plug and reversing light 18 mm phenolic plywood floor Drop sides made from anodized aluminum with recessed fasteners, fully removable Lashing rings integrated into the V-shaped outer frame, tensile force 400 kg per ring, Dekra-certified 6 lashing points Jockey wheel Humbaur multifunction lighting integrated in underride guard Price includes vehicle registration documents (Part II and COC papers) We stock a large number of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, pricing, and errors excepted. No liability for errors and misprints. Features: automatic reversing system, rubber suspension axle, independent suspension, high tarpaulin, jockey wheel, marker lights, hot-dip galvanized V-drawbar, braked, including warranty, 13-pin plug and reversing light, 18 mm phenolic floor, anodized aluminum drop sides with recessed fasteners, fully removable, lashing rings integrated into outer frame (400 kg per ring, Dekra certified), 6 lashing points. Gsdpfx Afjw Df Rvs Rekb