Nizki nakladalnik

Humbaur HTD 40 v21

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.500 kg, največja dovoljena obremenitev: 36.500 kg, skupna masa: 44.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.190 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 235×75 R17,5, medosna razdalja: 1.310 mm, Leto izdelave: 2024, Oprema: ABS, osrednja vrtljiva plošča, CETRATEK 4-Axle Low-Loader TL89.4 (EU-COC) Short Description Robust low-loader for heavy machinery transport. Frame made of high-strength ST-52/S355 steel, optionally with fine-grained steel S700. Ramps rated at 20 t load capacity each, mechanically or hydraulically foldable without loss of carrying capacity. Optionally available as a low-bed version; loading height in the wheel recess area can be reduced from approximately 900 mm to around 500 mm. Dimensions / Construction Total length: 11,914 mm, Maximum height: 3,775 mm (over ramps) Platform: Gooseneck 2,440 mm + Deck 6,750 mm Width: 2,540 mm (manually extendable by 250 mm each side) Fifth wheel → 1st axle: 2,767 mm, → 2nd/3rd axle: 6,136 mm Axle distances: front 1,310 mm, rear 1,360 mm Deck height: 900 mm (low-bed ~500 mm), Track width: 1,850 mm Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp Drawbar eye height: 400–900 mm; Turntable Ø 110 (CYR) Floor: Steel + 45 mm beech hardwood, protective lacquered Weight / Capacity a) GVW 44,000 kg → Payload ~36,500 kg* b) On-road 24,000 kg → Payload ~16,500 kg * Version a) requires special approval (§70 StVZO); inspection/DEKRA certification at additional cost. Drawbar eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg Rear supports: manual (hydraulic optional) Steel Structure / Chassis Welder qualification: TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175 4 × 11 t axles (TRAX), tyres: 235/75 R17.5 (16 pcs., PETLAS or equivalent; Continental/Michelin optional at extra cost), rims: 6.75×17.5, air suspension, permitted up to 100 km/h Brakes / Electrics Itjdeu Rbzvepfx Ab Hed WABCO EBS 4S/2M, linings: 330×200, air tanks: 2×80 L + 1×60 L Brake cylinders: 4× Type 24 + 4× Type 24/30, levers: 165 mm Voltage: 24 V (if towed by 12 V vehicle, possibly requires voltage converter) Side reflectors: 4× LED per side + 2× white front reflectors, rear lights: 2× LED, 2× triangular reflectors Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098 Note for tractor operation: 12→24 V transformer as well as ABS/EBS connection (ISO 7638) and power supply (e.g., ISO 1185/12098) required for the vehicle’s onboard hydraulics. Hydraulics (Ramps) 2 cylinders including changeover valve for operation via tractor’s onboard hydraulic system Accessories (Excerpt) 2 toolboxes, 2 wheel chocks (metal), fire extinguisher compartment Reflectors (side: white/yellow; extendable: yellow/red), rectangular rear reflectors Lashing rings: 7 per side + 6 on deck (10 t/ring) Mudguards (front/rear), hose/cable holders on the drawbar Coating System Sandblasted, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clear coat Warranty 2 years on frame structure and axles (excluding accidents/operator error) 2 years on electrical system & brake system (except wear parts such as brake linings, accidents/operator error) 1 year on paintwork (excluding accidents/operator error) Technical and price changes reserved. Images are for reference only and may include optional equipment.

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) on the rear * 24 V 15-pin, plus additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at the front * Straight steel rear mudflaps each with spray suppression (splash suppression) * Side underrun protection * Extended drop member by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated lockable storage compartments incl. lids * Chassis made of high-strength fine-grain steel * Floor over turntable platform: 50 mm, low-loader platform: 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included), each with 2 t lashing capability * Load securing package includes: 2 lashing eyes 6.4 t front left and right on main turntable frame, side front and rear each 1 pair 13.4 t lashing rings on outer frame, 4 pairs per side 10 t swiveling and lowerable lashing rings loadable from all directions recessed in outer frame, 2 pairs 6.4 t lashing rings on each side in the excavator arm rest, 8 pairs galvanized folding outriggers for 3 meter total width (not at the rear bevel) * Widening planks stowed in a compartment on the left side * Excavator arm rest above the rear axle to end of approach ramp approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding pipe from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm Itodpfx Asrczm Dsb Hod * Loaded platform height approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air reservoir and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and interim sale reserved * Available from CW 21 / 2026

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes Itodpol Th Evefx Ab Hed * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon, rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Closed single plastic mudguards front * Rear straight steel mud flaps each with spray suppression * Lateral underrun protection * Extended offset crank by 500 mm to the front * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated, lockable storage compartments with lids * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm softwood, and in lowbed platform from 60 mm softwood * Outer boards of access ramps made of 50 mm bamboo * Four stake pockets per side (stakes not included), each with 2 t lashing point capacity * Lashing package consisting of: 2 lashing eyes 6.4 t on main frame of turntable platform (front left and right); 1 pair of 13.4 t lashing rings per side front and rear on outer frame; 4 pairs per side of 10 t pivoting and lowerable lashing rings, loadable in all directions, recessed in outer frame; 2 pairs of 6.4 t lashing rings on each side in the excavator arm recess; 8 pairs galvanized folding markers for 3 m overall width (not on rear slope) * Extension planks stored in left-side compartment * Excavator arm recess above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports rear * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment via sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (includes 860 mm approach slope) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 21/2026