Prikolica z nizko platformo

MÜLLER-MITTELTAL T4 40,0 , Agrar, hydr. Rampen,3 m. Paket

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) on the rear * 24 V 15-pin, plus additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at the front * Straight steel rear mudflaps each with spray suppression (splash suppression) * Side underrun protection * Extended drop member by 500 mm to the front Bjdpfx Aorczm Djf Aocw * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated lockable storage compartments incl. lids * Chassis made of high-strength fine-grain steel * Floor over turntable platform: 50 mm, low-loader platform: 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included), each with 2 t lashing capability * Load securing package includes: 2 lashing eyes 6.4 t front left and right on main turntable frame, side front and rear each 1 pair 13.4 t lashing rings on outer frame, 4 pairs per side 10 t swiveling and lowerable lashing rings loadable from all directions recessed in outer frame, 2 pairs 6.4 t lashing rings on each side in the excavator arm rest, 8 pairs galvanized folding outriggers for 3 meter total width (not at the rear bevel) * Widening planks stowed in a compartment on the left side * Excavator arm rest above the rear axle to end of approach ramp approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding pipe from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air reservoir and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and interim sale reserved * Available from CW 21 / 2026

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.500 kg, največja dovoljena obremenitev: 36.500 kg, skupna masa: 44.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.190 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 235×75 R17,5, medosna razdalja: 1.310 mm, Leto izdelave: 2024, Oprema: ABS, osrednja vrtljiva plošča, CETRATEK 4-Axle Low-Loader TL89.4 (EU-COC) Short Description Robust low-loader for heavy machinery transport. Frame made of high-strength ST-52/S355 steel, optionally with fine-grained steel S700. Ramps rated at 20 t load capacity each, mechanically or hydraulically foldable without loss of carrying capacity. Optionally available as a low-bed version; loading height in the wheel recess area can be reduced from approximately 900 mm to around 500 mm. Dimensions / Construction Total length: 11,914 mm, Maximum height: 3,775 mm (over ramps) Platform: Gooseneck 2,440 mm + Deck 6,750 mm Width: 2,540 mm (manually extendable by 250 mm each side) Fifth wheel → 1st axle: 2,767 mm, → 2nd/3rd axle: 6,136 mm Axle distances: front 1,310 mm, rear 1,360 mm Deck height: 900 mm (low-bed ~500 mm), Track width: 1,850 mm Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp Drawbar eye height: 400–900 mm; Turntable Ø 110 (CYR) Floor: Steel + 45 mm beech hardwood, protective lacquered Weight / Capacity a) GVW 44,000 kg → Payload ~36,500 kg* b) On-road 24,000 kg → Payload ~16,500 kg * Version a) requires special approval (§70 StVZO); inspection/DEKRA certification at additional cost. Drawbar eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg Rear supports: manual (hydraulic optional) Steel Structure / Chassis Welder qualification: TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175 4 × 11 t axles (TRAX), tyres: 235/75 R17.5 (16 pcs., PETLAS or equivalent; Continental/Michelin optional at extra cost), rims: 6.75×17.5, air suspension, permitted up to 100 km/h Brakes / Electrics Bcedpeu Rbzvsfx Af Aew WABCO EBS 4S/2M, linings: 330×200, air tanks: 2×80 L + 1×60 L Brake cylinders: 4× Type 24 + 4× Type 24/30, levers: 165 mm Voltage: 24 V (if towed by 12 V vehicle, possibly requires voltage converter) Side reflectors: 4× LED per side + 2× white front reflectors, rear lights: 2× LED, 2× triangular reflectors Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098 Note for tractor operation: 12→24 V transformer as well as ABS/EBS connection (ISO 7638) and power supply (e.g., ISO 1185/12098) required for the vehicle’s onboard hydraulics. Hydraulics (Ramps) 2 cylinders including changeover valve for operation via tractor’s onboard hydraulic system Accessories (Excerpt) 2 toolboxes, 2 wheel chocks (metal), fire extinguisher compartment Reflectors (side: white/yellow; extendable: yellow/red), rectangular rear reflectors Lashing rings: 7 per side + 6 on deck (10 t/ring) Mudguards (front/rear), hose/cable holders on the drawbar Coating System Sandblasted, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clear coat Warranty 2 years on frame structure and axles (excluding accidents/operator error) 2 years on electrical system & brake system (except wear parts such as brake linings, accidents/operator error) 1 year on paintwork (excluding accidents/operator error) Technical and price changes reserved. Images are for reference only and may include optional equipment.

Stanje: novo, lastna masa: 7.500 kg, največja dovoljena obremenitev: 32.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 03/2023, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, TOP EQUIPMENT – INCLUDING THE FOLLOWING ACCESSORIES: Chassis frame hot-dip galvanized in immersion bath Front storage box on platform, with hinged lid Rear storage box on platform, with hinged lid Recess for excavator arm storage, lowbed – rear section 3 m equipment package without ramp incline Warning package for special permit Steel sheet toolbox Stake pocket set in outer frame Basic hydraulics for truck with rear connection Bcsdpfxoglblls Af Asw Hydraulic ramp lift for one-piece ramps Hydraulic lateral ramp shift Hydraulic support legs left and right 1 pair of 6t lashing rings bolted to outer frame WABCO Smart Board pre-configured Complete SSV front left HTD409525K COC certificate of conformity OPTIONAL Rubber flooring on ramp €1,890 net Rubber flooring on the incline €1,250 net Adjustable drawbar 40 / 50 DIN