Prikolice z nizkimi nakladalniki za gradbene stroje

MS Dorse MS TL89-4

CETRATEK 4-Axle Low-Loader TL89.4 (EU-COC)

Short Description
Robust low-loader for heavy machinery transport. Frame made of high-strength ST-52/S355 steel, optionally with fine-grained steel S700. Ramps rated at 20 t load capacity each, mechanically or hydraulically foldable without loss of carrying capacity. Optionally available as a low-bed version; loading height in the wheel recess area can be reduced from approximately 900 mm to around 500 mm.

Dimensions / Construction

Total length: 11,914 mm, Maximum height: 3,775 mm (over ramps)
Platform: Gooseneck 2,440 mm + Deck 6,750 mm
Width: 2,540 mm (manually extendable by 250 mm each side)
Fifth wheel → 1st axle: 2,767 mm, → 2nd/3rd axle: 6,136 mm
Axle distances: front 1,310 mm, rear 1,360 mm
Deck height: 900 mm (low-bed ~500 mm), Track width: 1,850 mm
Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp
Drawbar eye height: 400–900 mm; Turntable Ø 110 (CYR)
Floor: Steel + 45 mm beech hardwood, protective lacquered

Weight / Capacity

a) GVW 44,000 kg → Payload ~36,500 kg*
b) On-road 24,000 kg → Payload ~16,500 kg
* Version a) requires special approval (§70 StVZO); inspection/DEKRA certification at additional cost.
Drawbar eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg
Rear supports: manual (hydraulic optional)

Steel Structure / Chassis

Welder qualification: TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175
4 × 11 t axles (TRAX), tyres: 235/75 R17.5 (16 pcs., PETLAS or equivalent; Continental/Michelin optional at extra cost), rims: 6.75×17.5, air suspension, permitted up to 100 km/h

Brakes / Electrics

WABCO EBS 4S/2M, linings: 330×200, air tanks: 2×80 L + 1×60 L
Brake cylinders: 4× Type 24 + 4× Type 24/30, levers: 165 mm
Voltage: 24 V (if towed by 12 V vehicle, possibly requires voltage converter)
Side reflectors: 4× LED per side + 2× white front reflectors, rear lights: 2× LED, 2× triangular reflectors
Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098

Note for tractor operation: 12→24 V transformer as well as ABS/EBS connection (ISO 7638) and power supply (e.g., ISO 1185/12098) required for the vehicle’s onboard hydraulics.

Hydraulics (Ramps)

2 cylinders including changeover valve for operation via tractor’s onboard hydraulic system

Accessories (Excerpt)

2 toolboxes, 2 wheel chocks (metal), fire extinguisher compartment
Reflectors (side: white/yellow; extendable: yellow/red), rectangular rear reflectors
Lashing rings: 7 per side + 6 on deck (10 t/ring)
Mudguards (front/rear), hose/cable holders on the drawbar

Coating System

Sandblasted, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clear coat

Warranty

2 years on frame structure and axles (excluding accidents/operator error)
2 years on electrical system & brake system (except wear parts such as brake linings, accidents/operator error)
1 year on paintwork (excluding accidents/operator error)

Technical and price changes reserved. Images are for reference only and may include optional equipment.
Bdedpsu Rbzvjfx Ah Eei

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.