Humbaur Gradbeni Stroji Z Nizkim Nakladalnikom nakup rabljenega (576)

Stanje: novo, lastna masa: 3.900 kg, največja dovoljena obremenitev: 9.700 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.450 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, medosna razdalja: 1.270 mm, Leto izdelave: 2023, Oprema: ABS, spojka prikolice, HBTZ 197224 BS tandem with tapered rear 400 mm aluminium side walls Ksdpfx Aogi H Dpeaaond Rear loading platform with tapered end Loading height: 870 mm Air suspension axles from renowned manufacturers ABS Height-adjustable drawbar One-piece spring ramps 3 pairs of 10-ton lashing points 8 pairs of 2-ton lashing points Fully galvanized Tyres: 205/65 R 17.5

Stanje: novo, lastna masa: 5.680 kg, največja dovoljena obremenitev: 18.320 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, Leto izdelave: 2023, Oprema: ABS, Three-axle trailer BPW low-loader axles Knodpfx Aaeh I H Ddeasd Electronic air suspension with 2 ride heights Lowering function for safe loading Brake system compliant with EC regulations with 2S/2M Drawbar with 50 mm towing eye Raising and lowering of the drawbar 8 pairs of 10 t lashing rings recessed in the low-bed 6 pairs of 2 t lashing points above wheel cutouts 5 pairs of 3 t lashing/pocket sockets for 90x50 mm stanchions 50 mm softwood floor Chassis frame hot-dip galvanized by immersion bath Foldable side underrun protection Stanchion pocket package in outer frame One-piece hot-dip galvanized access ramps Laterally adjustable Direct-acting vertical spring supports

Stanje: novo, lastna masa: 1.500 kg, največja dovoljena obremenitev: 3.500 kg, skupna masa: 5.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215, medosna razdalja: 850 mm, Leto izdelave: 2023, Oprema: ABS, HUMBAUR Construction Equipment Tandem Low Loader HS 654020 BS INCLUDES ALUMINIUM Loading Ramps at Rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: • Permissible gross weight: 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Loading ramps made of ALUMINIUM • Height-adjustable drawbar • Automatic jockey wheel • 4 units 3 t lashing rings (in the corners) • 10 recessed 2 t tie-down points in outer frame • Dual-circuit air brake system with ABS • Steel sheet mudguards • Platform floor made from softwood planks • Chassis frame hot-dip galvanized by immersion bath • Tires 215/75 R17.5 Your benefits: • Low loading and construction height • Optimum corrosion protection through immersion hot-dip galvanization • Safe loading and unloading due to supports on the loading ramps • Simple and lightweight handling of the aluminium loading ramps • Ideal load securing options thanks to standard lashing points Ksdpfxehmm Rvs Aaaend • Continuously height-adjustable drawbar enables compatibility with various coupling heights of towing vehicles • Low dead weight => thus, high payload

Stanje: novo, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, barva: srebrn, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, 1 day: €135 3 days: €370 1 week: €660 1 month: €1,950 Loading dimensions: 500 cm x 201 cm x 30 cm with loading ramps 11.5 Construction Machinery Tandem Low Loader HS 115020BS HOT-DIP GALVANIZED Ksdpfx Aoin Ia Rsaajnd Equipment: • Permissible total weight, kg • Payload approx. kg • Loading area approx. 5000 x 2010 mm • Loading ramps with grating, hot-dip galvanized • Fixed drawbar • Reinforced 25 t gearbox support winch with load and fast speed (no jockey wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair) • 2 drop-down support legs at the rear of the vehicle • ABS braking system • Steel mudguards, hot-dip galvanized • Decking made from timber flooring • Chassis frame including superstructure hot-dip galvanized by immersion

Stanje: novo, lastna masa: 1.600 kg, največja dovoljena obremenitev: 4.900 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215/75 r17,5 zoll, medosna razdalja: 850 mm, Leto izdelave: 2023, Oprema: ABS, HUMBAUR Tandem Low-Loader Trailer for Construction Machinery HS 654020 BS INCLUDES ALUMINIUM Loading Ramps at Rear HOT-DIP GALVANIZED CHASSIS FRAME Features: • Permissible gross weight: 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Loading ramps made of ALUMINIUM • Fixed towing bar • Automatic jockey wheel • 4 x 3 t lashing rings (at the corners) • 10 x 2 t recessed lashing points in the outer frame • Two-circuit air brake system with ABS • Steel mudguards • Platform floor made from softwood planking • Chassis frame hot-dip galvanized by immersion • Tyres 215/75 R17.5 Your benefits: Kodpfx Aohmm Ryeaajnd • Low deck height / overall height • Optimum corrosion protection thanks to hot-dip galvanization by immersion • Safe loading and unloading due to supports at the loading ramps • Easy and lightweight handling of the aluminium ramps • Ideal cargo securing options with standard lashing points • The infinitely adjustable height towing bar enables compatibility with different coupling heights of towing vehicles • Low net weight = high payload => Delivery charges: €2.90 plus VAT per km => Prices ex-works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL Fahrzeugbau *Subject to prior sale and technical changes!* *Price valid ex-works D-86368 Gersthofen* *Sale to business customers only!*

Stanje: novo, lastna masa: 1.700 kg, največja dovoljena obremenitev: 4.800 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215/75 r17,5 zoll, medosna razdalja: 850 mm, Leto izdelave: 2023, HUMBAUR Construction Machinery Tandem Low-Loader HS 654520 BS INCLUDES ALUMINIUM loading ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Kodpfxehmm Rre Aaaond Specification: • Permissible total weight: 6,500 kg • Payload approx. 4,800 kg • Loading area approx. 4,500 x 2,000 mm • ALUMINIUM loading ramps • Continuously height-adjustable drawbar • Automatic jockey wheel • 6 pcs. 3 t lashing rings (in the corners) • 10 pcs. 2 t recessed lashing points in the outer frame • 2 adjustable support legs at the loading ramps • Dual-circuit air brake system with ABS • Steel mudguards • Platform floor made of softwood planks • Chassis frame hot-dip galvanized in an immersion bath • Tires: 215/75 R17.5 Your advantages: • Low loading and construction height • Optimum corrosion protection thanks to hot-dip galvanizing by immersion • Safe loading and unloading thanks to supports at the ramps • Simple and easy handling of the aluminium ramps • Ideal load securing options thanks to standard lashing points • The continuously height-adjustable drawbar enables compatibility with various towing vehicle coupling heights • Low tare weight, thus high payload capacity => Freight costs for delivery: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and change.* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!*

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 23.350 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2024, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE LOWBED TRAILER => FULL AIR SUSPENSION (front and rear) => HOT-DIP GALVANIZED Permissible total weight: 30,000 kg Payload: approx. 23,350 kg Chassis frame hot-dip galvanized via immersion bath Air suspension SAF axle with drum brake EBS electronic braking system Tyres: 235/75R17.5 – 12 units Lowbed length: approx. 6,500 mm 3 pairs of 10 t lashing rings recessed in the lowbed 2 pairs of 10 t lashing rings recessed in the highbed 4 pairs of 3 t lashing points on the outer frame 3 pairs of 6 t lashing eyes on the outer frame 6 pairs of stake pockets 90 x 50 mm in the outer frame Toolbox at the front, top of the platform with hinged lid 3-metre widening package without incline, with fold-out supports Spring ramp lifter Kjdpfx Ashmm N Usaajnd 4 x warning panels Rotating beacon Storage compartment under the loading floor 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for loading area and ramps Optional extras if required: Hydraulic ramp lifter €2,690.00 + VAT => Delivery freight cost: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general guidance only => may show/accessories subject to surcharge*

Stanje: rabljeno, lastna masa: 8.700 kg, največja dovoljena obremenitev: 31.300 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2023, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP-SPECIFICATION! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH RAISING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => OUTER FRAME WITH MULTIPLE LASHING POINTS (PERFORATED FRAME) => CLIMBING STRIPS ON THE REAR OF THE INCLINE => 6 LASHING POINTS IN THE EXCAVATOR ARM RECESS AT THE REAR => LONG ONE-PIECE LOADING RAMPS => LOW INCLINE ANGLE Perm. gross weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Loading ramps hot-dip galvanized Air suspension SAF axles with drum brakes EBS electronic braking system Tyres: 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Recess for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear of lowbed 4 pairs of 10 t lashing rings recessed in lowbed 2 pairs of 10 t lashing rings recessed in raised bed 4 pairs of 3 t lashing points on the outer frame of the lowbed 3 pairs of 6 t lashing eyes on the outer frame 4 pairs of stake pockets on the outer frame of rear bed 4 pairs of stake pockets on the outer frame of the lowbed 3-metre widening kit with folding outrigger (no bevel) 4 x warning panels with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with folding lids on the upper platform Hydraulic ramp lifters 1-piece ramps approx. 3,150 x 750 mm Softwood flooring for the loading platform and ramps 40,000 kg gross permitted only with exemption certificate as per §70 => Delivery freight costs: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Knsdpohvxgzjfx Aaajd Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Interim sale and modifications reserved!* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general reference only => may include/show accessories subject to extra charge*

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 10.000 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR Construction Machine Transporter Tandem Low-Loader REAR LOADING AREA ANGLED Knsdpfxohmm Rkj Aaajd HBT 116224BS / Hot-dip galvanized / Aluminium drop sides Chassis frame hot-dip galvanized in immersion bath Drop sides anodized aluminium Specification: • Tandem low-bed trailer (construction machinery and material transporter) • Loading surface with rear-end angle • Permissible total weight 11,900 kg • Payload approx. 9,010 kg • Loading area approx. 6,200 x 2,460 mm • Platform floor made of approx. 40 mm softwood planks • 400 mm high anodized aluminium drop sides • Reinforced 25 t gear support winch with load and fast gear • Fixed drawbar • Coupling height approx. 750 - 1,000 mm • 3 pairs of recessed lashing rings, 3 t each (3,000 daN) • 6 pairs of recessed lashing points, 1 t each (1,000 daN) in outer frame • 2 telescopic folding supports at the vehicle rear • ABS dual-circuit air brake system • 1-piece ramps, hot-dip galvanized, approx. 2,400 mm long and 520 mm wide, with galvanized STEEL GRATING SURFACE • Mudguards • Anti-spray system • Ø 40 mm DIN towing eye • Aluminium side underrun protection • Incline angle only approx. 16° • Loading height unladen only approx. 920 mm Optionally available at extra charge: • Plastic toolbox under the loading platform • Surcharge: 290,- Euro plus VAT => Delivery freight costs: 2.90 Euro plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL FAHRZEUGBAU *Interim sale and changes reserved!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general illustration only – may show/contain optional accessories at extra cost*

Stanje: novo, lastna masa: 2.500 kg, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 250 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, Construction Machinery Tandem Low Loader HS 115020BS HOT-DIP GALVANIZED Knedpfx Ajhmm Rneaasd Specification: • Permissible total weight: 11,900 kg • Payload: approx. 9,410 kg • Loading area: approx. 5000 x 2010 mm • Access ramps with grating surface, hot-dip galvanized • Fixed drawbar • Reinforced 25 t mechanical landing gear with load and rapid gear (no jockey wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2000 daN per pair) • 2 fold-down supports at the rear of the vehicle • ABS braking system • Steel mudguards, hot-dip galvanized • Platform floor with wooden decking • Chassis frame including structure hot-dip galvanized in immersion bath => Freight charges for delivery: €2.90 plus VAT per km => Prices ex D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL Fahrzeugbau *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general reference only => may show/contain accessories for an additional charge*

Stanje: novo, lastna masa: 10.650 kg, največja dovoljena obremenitev: 39.350 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.830 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, 5-AXLE SWIVEL-DOLLY LOWBED TRAILER, HOT-DIP GALVANIZED => FULL AIR SUSPENSION => HOT-DIP GALVANIZED IN TOP CONFIGURATION!! * LIFT AXLE * SELF-STEERING AXLE • SAF – LOWBED AXLES • AIR SUSPENSION • ONE-PIECE LONG ACCESS RAMPS • HYDRAULIC RAMP LIFTER • HYDRAULIC REAR SUPPORTS • HYDRAULIC SIDE SHIFT • HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE • EXCAVATOR ARM TROUGH • CHASSIS AND TURNABLE FRAME HOT-DIP GALVANIZED • OUTER FRAME ADDITIONALLY PAINTED IN RED • RAMPS HOT-DIP GALVANIZED • 10 t LASHING POINTS RECESSED IN DECK • 3 t LASHING POINTS IN OUTER FRAME (HIGH DECK) • 6 t LASHING POINTS IN OUTER FRAME (LOWBED) • 4 PAIRS OF 3 t LASHING POINTS IN OUTER FRAME (LOWBED) • LASHING POINTS IN EXCAVATOR ARM TROUGH • 3 METER WIDENING PACKAGE • FOLDING SUPPORT ARMS • WOODEN BOARDS IN STEEL BOX UNDER THE DECK • SECOND STEEL TOOLBOX UNDER THE DECK • WARNING SIGNS • REVOLVING BEACON AT REAR • ANTI-SLIP STRIPS AT REAR • 2 TOOLBOXES IN HIGH DECK Kodohmm Rcjpfx Aaaond • DIGITAL AXLE LOAD DISPLAY • WABCO SMARTBOARD • AIR SUSPENSION • LIFT-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING/UNLOADING) • STAKE POCKETS IN OUTER FRAME • TWO STAKE POCKETS INCLUDING INSERTABLE STAKES AT FRONT WALL • EBS – ELECTRONIC BRAKING SYSTEM B-DIMENSION = approx. 11,790 MM => Freight charges for delivery: €2.90 plus VAT per km => Prices valid ex D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL VEHICLE MANUFACTURING *Intermediate sale and changes reserved!* *Price valid ex D-86368 - Gersthofen* *Sales to business customers only!* *Images may differ and serve only for general orientation => may include/show accessories for an additional charge*

Stanje: rabljeno, Humbaur CH9 | Low Loader Semi-Trailer Knsdpfxexvi Ime Aaajd 📍Location: Switzerland, Wallisellen 🚛 Delivery available to your location – Use our shipping calculator to estimate transportation costs! 💰 Buy Now for EUR 2,000 or Make an Offer. Payment on delivery available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 9 inspection points: 7 approved ✅ 2 imperfect ℹ️ 0 critical issues ⚠️ 📌 Inspector’s comment: Tipper trailer – the trailer is stuck and does not tip, tyres in good condition, needs a new rubber trailer coupling. 📄 Want to see the full inspection report, additional photos, or a video? Tip: The reference "39732 Equippo" is often used to search for further details online. 💡 Why choose this machine and our service: ✔ Comprehensive, professional inspection ✔ Delivery to your worksite available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking for more equipment options? We offer useful tools and resources for equipment owners and operators – all easily accessible on our platform.

Stanje: novo, lastna masa: 6.700 kg, skupna masa: 30.000 kg, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.540 mm, Leto izdelave: 2024, Oprema: spojka prikolice, HTD30K- RM-BM / Air Suspension Technical Data: Internal dimensions: approx. 8,550 mm x 2,540 mm Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm Permissible total weight: 24,000 kg Payload: approx. 17,300 kg Tyres: 235/75 R17.5 twin, inches Loading height: approx. 900 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 800-980 mm Plank length: approx. 3,150 mm Plank width: approx. 750 mm Permissible total weight (special approval): 30,000 kg Payload (special approval): approx. 23,300 kg Low-bed length: approx. 6,500 mm Overall length (B-dimension): 10,800 mm Knsdpfx Ajq Ulaqoaaod Technical total weight: approx. 33,000 kg 8 pairs of lashing rings, 3,000 kg per lashing point Lashing rings on the outer frame 3 pairs of lashing rings, 10,000 kg per lashing point Lashing rings recessed in the low-bed 2 pairs of lashing rings, 10,000 kg per lashing point Lashing rings recessed in the high-bed 4 pairs of lashing rings, 2,000 kg per lashing point over the wheel recesses on 2nd and 3rd axle 7 pairs of lashing rings, 3,000 kg per lashing point Stake pockets (90x50 mm) with lashing facility Standard Equipment: Axles Low-loader axles from renowned manufacturers Suspension Air suspension module, including lifting and lowering, effective on the rear axle unit Braking system Braking system according to EU guidelines with EBS 4S/3M, multivoltage version (12-24V), spring-loaded parking brake including 2 external test ports for brake/modulator and airbag pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball bearing turntable ring Drawgear Drawbar with 8° inclined, height-adjustable draw-eye, Ø40 mm Low-maintenance silent bushings Frame Robust welded construction from high-tensile fine-grained steel Continuous cross members for maximum stability Wheel recesses front (top length approx. 2,170 mm) and rear (top length 1,280 mm), depth 330 mm Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm) Maximum safety during loading and unloading Floor 50 mm softwood decking Ramps Single-piece, hot-dip galvanized access ramps (3,100 mm x 750 mm) with 50 mm softwood decking, laterally adjustable Direct-acting, upright spring-lifters for effortless operation Optimal safety via tension lock and counter stop Finish Chassis and turntable frame hot-dip galvanized by immersion Supports 2 folding supports at the rear left and right on the vehicle tail Equipment Folding side underrun protection Other Retro-reflective line marking according to ECE Regulation R48, white on the sides, red on the rear Wheel recess cover at the front with 2 pairs of stake pockets, without covering (cover retractable underneath the longitudinal beams) Hardwood covering for front wheel recess covers Wheel recess cover Hardwood covering for rear wheel recess covers Storage box at the top front of the platform, with folding cover, size approx. L 700 x W 810 x H 140 mm LED warning package, HTD cranked Aspöck warning boards, fourfold, electrical system and rotating beacon 3 m equipment package without ramp incline for HTD30K wheel recesses with low-bed 6,500 mm, folding extension with spruce planks for the flat part of the low-bed Basic hydraulics for trucks with rear connection, Max. operating pressure 200 bar and up to 150l/min with 2-circuit hydraulic connection and return line with quick-coupling SVK BG3 Hydraulic side-shift of ramps by approx. 300 mm each Hydraulic ramp lifter fo

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WHD308525N1103145, lastna masa: 6.460 kg, največja dovoljena obremenitev: 23.540 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2023, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 6.490 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 8.540 mm, skupna širina: 2.540 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17.5, stanje pnevmatik: 80 odstotek, barva: siv, zavoro prikolice: prikolica s zavoro, Oprema: ABS, osrednja vrtljiva plošča, naša številka vozila: # 30613 Humbaur HTD 30 85 25 K nizkopodni priklopnik hidravlične naletne rampe 3.100 x 750 mm Skupna dolžina: 8.540 mm Dolžina nizkega poda cca 6.490 mm Širina: 2.540 mm Osi: SMB Bobnaste zavore Dvojna pnevmatika 235/75 R 17.5, cca 80% profila 4 para žepov za stebričke 90 x 50 mm v nizkem podu 2 para žepov za stebričke 90 x 50 mm v visokem podu 3 para zavarovalnih obročev 10.000 kg v nizkem podu, potopni 2 para zavarovalnih obročev 10.000 kg v visokem podu, potopni različne pritrditvene točke 3.000 kg Nakladalna višina cca 900 mm Nakladalni kot cca 10° Višinsko nastavljiva vlečna ojnica 40 mm vlečna čeljust LED osvetlitev Okvir vroče pocinkan Stranska zaščita proti naletu 2 para opozorilnih tabel 1x rotacijska opozorilna luč Knjdpfexu Dnfex Aaaed Zadnja podpira ABS EBS Skladiščni prostor s pokrovom v visokem podu Po dogovoru možno financiranje/finančni leasing!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, HS 105020 BS 10145 / SMB with Grating Surface on Ramps ++ Delivery possible, freight costs on request ++ Technical Data: Loading height: 705 mm Ramp angle: 16° Tyres: 235/75R17.5 Equipment: ABS CHASSIS FRAME INCLUDING SIDE WALLS AND DRAWBAR FULLY HOT-DIP GALVANIZED HEAVY-DUTY SMB AXLES WITH SOLID PARABOLIC SUSPENSION AXLE UNIT WITH LOAD EQUALIZATION 4 RECESSED AND FORGED LASHING POINTS IN THE CORNERS 12 LASHING EYES INTEGRATED INTO THE OUTER FRAME CONTINUOUSLY HEIGHT-ADJUSTABLE COUPLING DEVICE ACCESS RAMPS WITH ROBUST, HOT-DIP GALVANIZED STEEL GRATING SURFACE FOR SUPERIOR GRIP TAILLIGHTS PROTECTED AND INTEGRATED INTO THE UNDERRUN PROTECTION Kjdpfx Aewkt Hleaasnd EXTRA-HIGH CORNER POSTS FOR SECURE SUPPORT OF THE ACCESS RAMPS ROBUST, HOT-DIP GALVANIZED STEEL MUDGUARDS 2 FOLDABLE AND TELESCOPIC SUPPORT LEGS AT THE REAR ALUMINIUM SIDE IMPACT PROTECTION FROM START OF LOADING AREA TO 1ST AXLE HEAVY-DUTY GEAR SUPPORT WINCH WITH LOAD AND QUICK MODE LOW LOADING HEIGHT 235/75 R17.5 INCH TYRES …and much more Loose accessories available as options. - - all information without guarantee - - Images may differ - -

Stanje: novo, največja dovoljena obremenitev: 9.000 kg, skupna masa: 11.900 kg, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2024, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, HUMBAUR 11.9 t Tandem Low-Loader Drive-Over Trailer with Ramp Compartment, Type HBT 106224 BE - MULTI (recessed planks) INCLUDES: anodised aluminium side walls, 600 mm high INCLUDES: galvanised H-frame, 1,000 mm high / total front wall height: 1,600 mm INCLUDES: HOT-DIP GALVANISED CHASSIS/DRAWBAR Specification: - Gross vehicle weight: 11,900 kg - Payload: approx. 9,000 kg - Loading area: approx. 6,200 x 2,460 mm - Unladen loading height: approx. 920 mm - Overall dimensions (L x W x H): approx. 8,140 x 2,550 x 2,520 mm - Anodised aluminium side walls, fold-down and removable; galvanised corner stanchions, insertable front and rear, 600 mm high - H-frame, 1,000 mm high (front panel total height 1,600 mm) - Lockable compartment in the chassis frame for optional aluminium ramps - Infinitely height-adjustable drawbar for coupling heights (unladen) approx. 700 - 1,000 mm - Reinforced 12 t gearbox-support winch with load and fast mode - BPW axles - 6 recessed 6 t lashing rings - 14 retractable 2 t folding lashing brackets on outer frame - 2 telescopic support legs at rear - Dual-circuit air brake system with ALB function - ABS braking system, 24 Volt - Spindle parking brake - Hot-dip galvanised steel mudguards - Softwood plank flooring - Hot-dip galvanised chassis frame and drawbar in immersion bath - Tyres: 235/75 R17.5 Knedpetiwv Uefx Aaaed - Maintenance-free parabolic suspension with load equalisation - Electrics: 15-pin, 24 Volt - Brake connection: 2 keyed coupling heads, red/yellow, ISO 1728 Your advantages: - High-quality, corrosion-protected anodised aluminium side wall construction - Optimum corrosion protection via immersion bath hot-dip galvanising - Safe loading and unloading thanks to telescopic folding rear supports - Easy handling with the patented retaining system for ALU loading ramps - Lockable ramp compartment - Ideal load securing thanks to standard lashing options - Infinitely height-adjustable drawbar allows compatibility with varying coupling heights of towing vehicles - Low tare weight means high payload capacity Options available at extra cost: - 1 pair of ALU loading ramps (8 t/pair) with patented locking, approx. 3,570 mm long x 400 mm wide (approx. 55 kg each) - 2 pairs of container locks for 20 ft ISO containers *In-stock vehicle - immediately available *Interim sale reserved *Ex works price - Gersthofen

Stanje: novo, največja dovoljena obremenitev: 107.000 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 850 mm, vzmetenje: parabolično listje (vzmet), Leto izdelave: 2024, Oprema: dvižna zadnja plošča, HUMBAUR 14.4 t Tandem Low Loader – Drive-Over Version (Twin Tyres) with Rear Ramp Bevel and Folding Steel Ramps, Model HBTZ 146225 BS INCLUDES hot-dip galvanized grating surface on rear ramps INCLUDES anodized aluminium side walls HOT-DIP GALVANIZED CHASSIS/TOW BAR Specification: Permissible total weight: 14,400 kg Payload approx. 10,700 kg Loading area approx. 6,200 x 2,460 mm Unladen loading height approx. 850 mm Overall dimensions (LxWxH): approx. 8,370 x 2,550 x 3,260 mm 400 mm high anodized aluminium side walls, foldable and removable on the sides; galvanised corner posts, plug-in at front and rear Rear loading area bevel Ramps with hot-dip galvanized grating surface, laterally adjustable (approx. 2,400 x 540 mm), each ramp with gas strut assist Infinitely height-adjustable tow bar for coupling heights (unladen) approx. 600–900 mm Reinforced 12 t geared support winch with load and fast gear BPW axles 6 recessed lashing rings, rated 6 t each 14 retractable drop lashing brackets, rated 2 t, in the outer frame 2 telescopic folding supports at the rear Dual-circuit air brake system EBS (Electronic Braking System) 24 Volt Spring-loaded parking brake TPMS (Tyre Pressure Monitoring System) Full LED lights Flashing side marker lights Hot-dip galvanized steel mudguards Floor made of painted/impregnated softwood planks Chassis frame and tow bar hot-dip galvanized by immersion Tyres: 205/65 R17.5 (8 units) Maintenance-free parabolic suspension with load compensation Electronics: 15-pin, 24 Volt Brake connection: 2 ISO 1728 colour-coded coupling heads, red/yellow Your benefits: Knedpfx Aaovbykyoaed Low loading height thanks to 205 twin tyre configuration High-quality, corrosion-protected anodized aluminium side wall body Optimum corrosion protection thanks to total immersion hot-dip galvanizing Safe loading and unloading with telescopic folding supports at the rear and anti-slip grating ramp surface Easy handling of steel ramps thanks to ramp lifters Excellent load securing options through standard lashing features Infinitely height-adjustable tow bar allows compatibility with various towing vehicle coupling heights Low unladen weight = high payload Optional extras (at additional cost): Plastic toolbox underneath the loading area PLEASE NOTE! Sample images, equipment may vary! *Stock vehicle – immediately available *Subject to prior sale *Ex works price – Gersthofen

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Kodpfx Aaext U Dbeajnd

Stanje: rabljeno, največja dovoljena obremenitev: 4.900 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, skupna širina: 2.540 mm, skupna višina: 4.000 mm, Humbaur Tandem Low Loader HS 654020 TA-BS ? Used First registration: 17/04/2018 ID number: 100242537 Serial number: WHD654020J0862820 Dimensions: * Internal dimensions: approx. 4,000 x 2,000 x 330 mm * Overall dimensions: approx. 6,200 x 2,540 x 2,860 mm * Loading height: approx. 630 mm Technical data: * Permissible total weight: 6,500 kg * Payload: 4,900 kg * Tyres: 215/75 R17.5 (approx. 80–90% tread) * Ramp angle: approx. 15° * Ramp length: approx. 2,250 mm * Ramp width: approx. 410 mm Kjdpfx Asxx Eaweaasnd Other details: * German registration documents * Vehicle immediately ready for use * Video of the vehicle available Contact: Fynn Jacobsen & WhatsApp The details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be checked separately if necessary. Subject to prior sale and errors excepted. We are a registered automotive master workshop and contractual partner of Hiab, Meiler, Terberg, and HMF. We assist with all export formalities.

Stanje: rabljeno, lastna masa: 5.010 kg, največja dovoljena obremenitev: 15.990 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2019, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: Hot-dip galvanized, 20 lashing eyes, 10 stake pockets, loading height: 900 mm. Vehicle is sold on behalf of the bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: !, More Details: ! Knsdpfjxghu Hox Aaaed

Stanje: rabljeno, največja dovoljena obremenitev: 39.348 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2018, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 9.822 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Leto izdelave: 2018, Oprema: ABS, Phone & WhatsApp Vehicle Data Chassis Number: WHD509525J0866708 * Year of Manufacture / Delivery: 2018 * Permissible Gross Weight: 24,000 kg (special permit up to 50,000 kg) * Payload: approx. 14,500 kg (with special permit up to 40,500 kg) * Technical Gross Weight: approx. 55,000 kg * Internal loading platform dimensions: approx. 9,822 × 2,540 mm * Overall dimensions: approx. 11,790 × 2,540 × 3,760 mm * Loading height: approx. 890 mm * Lowbed length: approx. 7,220 mm * Approach angle: approx. 10° ----Chassis & Axles 5-axle low loader with turntable * SAF low loader axles with closed S-cam brake * Axle configuration: * 1st axle: lift axle * 2nd axle: fixed * 3rd axle: self-steering trailing axle * Air suspension with lift & lower functionality * Tyres: 235/75R17.5 ----Frame & Body Heavy welded construction made of high-strength fine-grain steel * Straight-through crossmembers for maximum stability * Wheel recesses above the rear wheels * Sloped front and rear corners * Hot-dip galvanized chassis frame (immersion bath) * Paint: special colour Scania Chilli Red (1433004) ----Loading Platform & Securing 50 mm softwood floor * 5 pairs of recessed lashing rings (10 t) in lowbed * 3 pairs of lashing rings (10 t) in raised bed * 4 pairs of lashing points (3 t) on outer frame * Stake pocket package on outer frame * Folding outriggers with spruce planks (straight section of lowbed) * Warning panels and revolving beacon for special permit ----Ramps & Hydraulics Drive-up ramps 3,100 × 750 mm, hot-dip galvanized, laterally adjustable * Hydraulic ramp lifter for one-piece ramps * Hydraulic ramp shifting (sideways, only with basic hydraulics) * Hydraulic support legs left & right (only with basic hydraulics) * Basic hydraulics for truck connection (200 bar / up to 150 l/min, 2-circuit) ----Braking System & Electrics Brake system according to EC directives with EBS (4S/3M) * Spring-loaded parking brake * 24V electrics with impact-resistant multi-chamber lights in underrun protection * 15-pin connection cable * WABCO Smart Board * 24V EBS braking system incl. plug ----Accessories & Extras Various storage boxes (front, rear, under platform, with folding lid) * Special bracket for drawbar height adjustment * Drawbar cranked with 50 mm towing eye * Wheel chocks (standard + 2 additional) * Steel mudguards with anti-spray system * Retroreflective line marking according to ECE R48 * Visible surface coating additionally applied on galvanization (front, outer frame, rear) Technical Condition: * Fully functional * Body and vehicle in top condition Tyres: * 1st axle (235/75R17.5) approx. 20% * 2nd axle (235/75R17.5) approx. 20% * 3rd axle (235/75R17.5) approx. 20% * 4th axle (235/75R17.5) approx. 10% * 5th axle (235/75R17.5) approx. 30% Other: Knedpfx Aaexxug Heaod * German vehicle documents * Vehicle immediately ready for operation * Video of the vehicle available Contact: Jörn Jacobsen & WhatsApp) The information provided in advertisements, on the internet, on price tags and in pictures is non-binding and does not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed equipment must be verified separately if necessary. Subject to errors and prior sale. We are a certified master car workshop and contractual partner of Hiab, Meiler, Terberg, and HMF. We assist with all export formalities.

Stanje: rabljeno, lastna masa: 5.010 kg, največja dovoljena obremenitev: 15.990 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2019, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: Hot-dip galvanized, 20 lashing eyes, 10 stake pockets, loading height: 900 mm. Vehicle is sold on behalf of the bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: !, More Details: ! Ksdpfx Aasxr Dvdeaond

Stanje: rabljeno, lastna masa: 3.570 kg, največja dovoljena obremenitev: 10.030 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, prva registracija: 10/2017, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.470 mm, vzmetenje: drugo, velikost pnevmatike: 205/65R17,5 ---/124J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65R17,5 ---/124J, velikost zadnje pnevmatike: 205/65R17,5 ---/124J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading height approx. 820 mm, 10 lashing rings, -- subject to typographical errors, mistakes and changes, sample images --, More data at: !, More details: ! Kedsxr Dvkepfx Aaajnd

Stanje: rabljeno, lastna masa: 2.705 kg, največja dovoljena obremenitev: 7.895 kg, skupna masa: 10.600 kg, konfiguracija osi: 2 osi, prva registracija: 04/2014, dolžina tovornega prostora: 5.250 mm, širina tovornega prostora: 2.430 mm, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, Loading height approx. 860 mm, 400 mm side walls, 10 x lashing eyes, vehicle is being sold on consignment., -- Subject to misprints, errors and changes, sample photos --, More data at: !, More details: ! Kodpfx Aaexq N Nysasnd

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Kedpfsxq N N Hox Aaajnd