Prikolica z nizko platformoMÜLLER-MITTELTAL
5 achs Tieflader, Nachlauflenkachse, MA liftbar
Prikolica z nizko platformo
MÜLLER-MITTELTAL
5 achs Tieflader, Nachlauflenkachse, MA liftbar
Fiksna cena plus DDV
99.000 €
(117.810 € bruto)
Leto izdelave
2026
Stanje
Novo
Lokacija
Egestorf 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Fiksna cena plus DDV
99.000 €
(117.810 € bruto)
- Lokacija prodajalca:
- Eichenstich 12, 21272 Egestorf, Nemčija

Pokliči
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 38.620 kg
- Skupna masa:
- 50.000 kg
- Konfiguracija osi:
- 3 osi
Podrobnosti ponudbe
- ID oglasa:
- A104-27-600
- Referenčna številka:
- 6179
- Posodobitev:
- nazadnje dne 31.03.2026
Opis
T5 Profile 50.0:
----Brakes:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm when axle is lifted)
* Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads.
* Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
* Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary)
* LED lighting system 12/24 V
* Removable rear LED beacon
----General Accessories:
* Mechanical warning plate kit for 3 m total width
* Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left
* Front axle with plastic mudguards, rear with galvanized steel mudguard skirts
----Low Loader Platform:
* Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers
* Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front
* Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform
* Bamboo wood between the longitudinal beams in front of the excavator arm rest
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing rings at front corners
* 2 x 13.4 t UVV lashing points each at side front and rear corners
* 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions)
* 4 stake pockets per side with additional 2 t lashing capability each
* 1 x 16 t UVV lashing ring on the rear cross member
----Widening:
* Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side)
----Excavator Arm Rest:
* Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Platform Dimensions:
* Platform over turntable: 2,600 + 390 x 2,520 mm
* Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized
* Tow bar, axles, hydraulic axle supports, and air tanks painted in black
Crjdpfxsl Tihus Al Hjb
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately*
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
----Brakes:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm when axle is lifted)
* Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads.
* Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
* Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary)
* LED lighting system 12/24 V
* Removable rear LED beacon
----General Accessories:
* Mechanical warning plate kit for 3 m total width
* Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left
* Front axle with plastic mudguards, rear with galvanized steel mudguard skirts
----Low Loader Platform:
* Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers
* Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front
* Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform
* Bamboo wood between the longitudinal beams in front of the excavator arm rest
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing rings at front corners
* 2 x 13.4 t UVV lashing points each at side front and rear corners
* 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions)
* 4 stake pockets per side with additional 2 t lashing capability each
* 1 x 16 t UVV lashing ring on the rear cross member
----Widening:
* Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side)
----Excavator Arm Rest:
* Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Platform Dimensions:
* Platform over turntable: 2,600 + 390 x 2,520 mm
* Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized
* Tow bar, axles, hydraulic axle supports, and air tanks painted in black
Crjdpfxsl Tihus Al Hjb
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately*
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
175 Oglasi na spletu
Pošlji povpraševanje
Telefon & Faks
+49 40 33... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Mali oglas
ANDELST
932 km
Sistem ročice s kavljem
VolvoFMX 430 6x4 VDL 21 Ton haakarmsysteem
VolvoFMX 430 6x4 VDL 21 Ton haakarmsysteem
Mali oglas
Legden
847 km
Tovornjak s kavljem za kontejnerje
MERCEDES-BENZArocs 2646 mit HYVA 2047-S Abrollkipper *NEU*
MERCEDES-BENZArocs 2646 mit HYVA 2047-S Abrollkipper *NEU*
Mali oglas
Nürnberg
462 km
Gradbeni stroji z nizkim nakladalnikom
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Mali oglas
Langelsheim
728 km
Prikolica na rolo
HüffermannHAR 20.67
HüffermannHAR 20.67
Mali oglas
Koenigs-Wusterhausen
693 km
Tristrani prekucnik
MERCEDES-BENZAtego 1530 K 2-Achs Kipper Meiller
MERCEDES-BENZAtego 1530 K 2-Achs Kipper Meiller
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar,
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar,
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake






























































































































































































































