Müller-Mitteltal Prikolica Na Rolo nakup rabljenega (238)

Stanje: rabljeno, številka stroja/vozila: 217, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 5.300 mm, barva: oranžna, Oprema: ABS, Drum brake Kdedpfxonh Rzyo Adkew Subject to errors and omissions

Stanje: rabljeno, lastna masa: 2.500 kg, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2003, dolžina tovornega prostora: 5.200 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70R19,5 140/138J, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70R19,5 140/138J, velikost zadnje pnevmatike: 245/70R19,5 140/138J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 10 tie-down rings, 600 mm side walls, -- Printing errors, mistakes, and changes excepted, sample images --, More data at: !, More details: ! Kjdpfexr Duajx Adkodw

Stanje: novo, največja dovoljena obremenitev: 38.900 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T5 profile 50.0: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle steering (axle lock for manoeuvring can be activated from the cab without additional truck-side installation, and additionally via a switch on the trailer); the lock must be disengaged before driving on public roads * Air suspension, lift and lowering system with RtR valve Kdodpfx Adsl Tihuokjw * 3rd axle liftable (ride height +30 mm with lifted axle) * Forced relief and forced lowering of the lift axle for manoeuvring (requires truck-side installation), speed-dependent activation via EBS * Smartboard infotool with pressure sensors for total axle load display per axle group * TPMS with display option in the truck via EBS signal (no truck-side installation required) * Mechanical warning sign kit for 3m total width * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment * LED lighting system 12/24 V * Removable rear LED beacon * Toolbox, galvanised steel approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle, galvanised steel mud guards rear axle * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to rear) * Shortened low-loader deck by 500 mm to 6,280 mm incl. extended step by 500 mm to the front * Load securing package: 2 x 6.4 t lashing rings front corners, side front & rear corners each 2 x 13.4 t UVV lashing rings, 5 x 10 t UVV lashing rings per side (pivoting/lowering and loadable in all directions), 4 stake pockets per side additionally providing 2 t lashing option, 1 x 16 t UVV lashing ring on rear traverse * Rubber matting on folding ramp, approach slope, and low loader running surface * Bamboo wood inserted between main beams in excavator arm storage area * Extendable and folding outrigger extensions for 3 m total width (beam holder under chassis, right side) * Continuous excavator arm storage with reinforcement profile from last axle to rear cross member approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on sides * Hydraulic folding ramp with dual-line hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic capacity over 40 l/min up to 140 l/min) * Loaded platform height 890 mm +/- 20 mm (via air suspension) * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach ramp * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanised * Drawbar, axles, hydraulic axle supports, and air tanks painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 14/2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.000 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2013, dolžina tovornega prostora: 6.800 mm, skupna širina: 2.550 mm, skupna višina: 1.400 mm, Leto izdelave: 2013, Oprema: ABS, ABS, EBS, automatic slack adjusters, 2x 10-ton axles (BPW), air suspension, drum brakes, spring-actuated parking brake on rear axle, pneumatically lowerable tow bar, release valve on front axle, ratchet tensioners, hydraulic side locking, closed storage box, two reversing lights, network box, spare wheel carrier, closed lateral underrun protection, fixed rear underrun guard, rear apron on underrun guard, foldable A-shield, container size 2x10 cbm roll-off trough (ASK-mulde). Kjdpfx Aouzdm Aodkodw Hüffermann Krandienst GmbH: we trade, rent, and repair. Roll-off trailers, roll-off trucks, refuse collection vehicles, mobile cranes, and aerial work platforms... Contact us! Interested in financing? We are happy to provide you with a non-binding financing offer. This offer is subject to change, without guarantee or warranty. Prior sale reserved. To reserve, a down payment of 10% of the purchase price is required. Reservations or claims for availability only apply after receipt of payment. The purchase is finalized only upon receipt of payment. The vehicle remains the property of Hüffermann Krandienst GmbH until fully paid. Payments are accepted exclusively in euros, without additional costs to the seller, and only by bank transfer or in cash. No checks.

Stanje: novo, največja dovoljena obremenitev: 20.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 platform: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system including RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock activated by reverse gear pin (steering lock for the trailing axle from the tractor, for shunting purposes only—no installation required on the truck—assigned to pin 10 in the 15-pin connector, for shunting only, not permitted for public road use) * SmartBoard control unit as an infotool with pressure sensors for total axle load display * Tire pressure monitoring with display in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded: 900 mm, adjustable height at the head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign package at front and rear * Toolbox made of galvanized steel sheet—black powder coated—approx. 650 x 300 x 600 mm, right side * Hydraulic flow divider Kedpfer Dpz Asx Adkodw * Continuous sidewalls (without center stake) up to the drive-on slope * Folding rear stanchions * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon, including bracket and installation * 2 x LED reversing lights at vehicle rear (actuated by reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t folding lashing brackets * One 10 t lashing ring in each corner, plus two 10 t and three 6.3 t lashing rings per side * Various holes in front and rear crossmembers for 1.2 t lashing possibilities * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-bank hydraulic control valve for possible retrofitting of hydraulic ramp shift * Chassis, drawbar, front wall, rear mechanical supports, drive-on ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front landing gear painted in black * Hydraulic flow divider in trailer (for hydraulic pump output in the truck above 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 13/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders Kedjl Tqkwspfx Adkodw * Disc brakes * Duomatic brake coupling * 2 x 10-ton SAF axles * Air suspension with automatic lowering when uncoupling the brakes * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle * Plastic tool box on right side, enclosed plastic mudguards * Enclosed side underrun protection suitable as advertising space * Rear underrun protection with 2 impact buffers * Foldable "A" sign at the rear for waste disposal * LED tail lights with protective cover * 2 x 7-pin electrical connectors * Chassis hot-dip galvanized (excluding air tanks, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Locking of the roll-on container using pneumatic 4-point claw system * Front: 2 insertable container stops with 2 additional locking positions * Unladen ride height approx. 1,165 mm * --Permissible gross weight technically possible: 20,000 kg-- * Suitable for container lengths of 5,000 to 7,000 mm * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic brake system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when uncoupling the brake * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic toolbox on the right side, closed plastic mudguards * Side impact protection closed on one side, suitable as an advertising surface * Rear underrun protection with 2 buffer stops Kdodpfxjl Tpy He Adksw * Foldable "A"-sign at the rear for waste disposal * LED tail lights with protective housing * 2 x 7-pin power connectors * Chassis hot-dip galvanized (excluding air tanks, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Roll-off container secured with pneumatic 4-point claw locking system * At the front: 2 plug-in container stops with 2 additional plug-in positions * Unladen ride height approx. 1,165 mm * -- Permissible gross weight of 20,000 kg technically possible -- * Suitable for 5,000 – 7,000 mm container lengths * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, lastna masa: 7.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2006, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 9.100 mm, širina tovornega prostora: 2.750 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, barva: siv, Oprema: ABS, Bobnasta zavora Nosilnost 22.200 kg Gumijasta tla Hidravlične dvojne rampe in hidravlični pomik Gigant osi Pridržujemo si pravico do napak Ksdpfxowh Rwvo Adksdw

Stanje: novo, največja dovoljena obremenitev: 6.000 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * NEW VEHICLE without initial registration * Available immediately, * Reference number for inquiries: 11555 * TPMS tire pressure monitoring * EBS braking system, drum brakes, BPW axle, parabolic springs * Support winch at the front, spring-assisted square support legs at the rear with base plate and safety locking pins for various support heights Kdedew R H Syjpfx Adkjw * Drawbar with 40 mm towing eye (height-adjustable) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, closed steel mudguards * Swiveling cable drum frame * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * For drum diameter 800–3,000 mm x (1,700 mm width between drum arms) * With locking device for drum securing at arm ends as well as locking of drum frame to chassis with a centrally positioned claw lock * Motor-hydraulically powered pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic connectors, hoses, and pipes in NW 13. * Hydraulic drum drive with oil motor, valves, and rubberized drive rollers (adjustable). Hydraulic speed controller and brake for drum drive. * Additionally, hydraulic pump unit with petrol engine and manual starter, 13 HP with gear pump (150 bar), pressure supply either by connecting to truck hydraulics or pump unit * Alternatively, diesel engine with 6.5 HP, 150 bar, instead of petrol engine * 2 LED work lights mounted on the sides of the trailer (suitable for 12 V and 24 V), can be switched from the truck (truck-side installation required, connected to PIN 11) * Tool box approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated in side protection, exterior finished in RAL 9016 traffic white (polyester coated) ---- * Financing available through our partners with or without down payment or final installment, and different terms possible. Request an offer from us! * We are an authorized Müller Mitteltal dealer! * Example installment purchase from our partner FM LeasingPartner: e.g., €865 per month net, no down payment, and "0" euro remaining value at 48-month term. * Request an offer from us! ---- * Our opening hours * Monday–Thursday: 08:00–17:00 * Friday: 08:00–15:00 * Outside business hours, we are available by appointment * wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais ----

Stanje: rabljeno, največja dovoljena obremenitev: 14.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2010, naslednji pregled (TÜV): 05/2025, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Leto izdelave: 2010, Oprema: ABS, MÜLLER MITTELTAL RA18 Trailer for Swap Containers with External Rollers 5,500 mm – 7,000 mm, German trailer, second owner Technical Data Suitable for containers with external rollers, internal length 5,500–7,000 mm, for rear loading. Dimensions: - Gross weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread Features: Kdjdpovg T Nyofx Adkow - ABS/EBS connection according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer rails for container guidance, hot-dip galvanized - Container locking: The roll-off container is secured at 4 points by 2 pneumatic clamping units. After sliding on the container, the 4 securing claws are closed by activating a valve, clamping the container to the chassis frame. To the front, the container is additionally secured by 2 insertable lock parts (with holders), which can be positioned at various points along the guide rails. - 2x 9t BPW 420 mm drum brake axles with air suspension - Air suspension with lowering function - Frame: welded steel construction - Brake system: two-line EBS-compliant (EU standard) - DUOMATIC coupling head - Spring-loaded parking brake - Electrics: 24 volts - Multi-chamber rear lights - 15-pin plug with connecting cable - Lighting according to EU regulations - Rims: factory silver - Underrun protection: aluminum profiles - Wheel chocks with holders - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Delivery available at extra cost All information subject to change! Sale to businesses or for export only! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-actuated cylinders * TPMS (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Center axle can be lifted * Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye & height adjustment device * Tool box made of powder-coated sheet steel as well as basket-type spare wheel holder on the right side * Reflective contour marking tape on the sides and rear * Side underrun protection * Plastic quarter mudguards with spray guard * Plastic rear impact protection buffer * LED rear lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for container guidance * Sheet steel floor with roller recesses in bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking and mechanically inserted stop angles at the front in the track section * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering, the front 4 skip stops are inserted with oscillating stops * 3 pairs of 10 t UVV lashing rings on the sides for securing chains/straps by positive and frictional connection * 4 cloverleaf lashing brackets on each side and 1 pair of 13.4 t UVV lashing rings at the front Kedopk D Iiopfx Adksdw * Load securing certification as per DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip surface in the drive-up slope area * Mechanical drop-down supports at the rear * 1 pair of aluminium approach ramps (16 t per pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * Tyres 235/75 R17.5 * Ride height loaded approx. 1,003 mm * Payload 18,900 kg * Technically permissible total weight of 27,000 kg * Axles, turntable, drawbar and air tanks painted black * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors * Available from calendar week 50/2025

Stanje: rabljeno, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, naslednji pregled (TÜV): 07/2025, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking mechanism, underrun protection, side aluminum side guard, twin tires. Ksdpfxowypl Ns Adksdw Body: 2-axle outer roller trailer for roll-off containers from 5.5 m to 7 m or 2x 10 m³ skip containers, BPW axles, drum brakes, pneumatic locking, pneumatic lowering drawbar. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2006, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.250 mm, * Dolly trailer for roll-off & skip containers * Pneumatic container locking system * Lowerable drawbar * BPW air suspension axles As inspected or offered, without additional services or accessories. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be provided with advertising stickers and/or signage. Our general terms and conditions of delivery and payment apply. We support you with export processing, preparation of export documents, procurement of license plates, supplier declarations, etc.! Kjdpfeizy Nysx Adkedw The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment must be checked separately if necessary. We expressly reserve the right to prior sale, as this item is also offered on other platforms. Accessory information is provided without guarantee. Subject to changes, prior sale, or errors. We offer and strongly recommend a viewing and inspection to avoid any misconceptions regarding condition and suitability by the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Stanje: rabljeno, največja dovoljena obremenitev: 13.470 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 7.075 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2023, Oprema: ABS, Immediately available stock vehicle with registration dated 07/2024 Kodpfx Asugzqtodkodw ABS, EBS-E, RSS, 2 x 10 t axles (Gigant), steel rims, 235/75 R17.5 tires, drum brakes, automatic slack adjusters, air suspension, lift/lower function, WABCO SmartBoard, weight detection / axle load display via EBS CAN bus signal for display in the truck cab (vehicle must be appropriately prepared, not a certified scale), release valve on front axle, spring-loaded parking brake on rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made from galvanized steel approx. 1,000x300x600mm, storage compartment for container net approx. 1,000x300x600mm, closed side underrun protection, fixed underrun bar, rear apron on underrun bar, folding A-sign, ramp compartment incl. aluminium loading ramps (2,800 mm long, 470 mm wide, approx. 10,600 kg pair load capacity), hot-dip galvanized chassis, module lights partially with LEDs, two additional LED reversing lights on rear of vehicle. Load securing package: 8 pieces UVV safety lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the outer frame (protruding over material thickness). Arrangement: 1 pair in front of rear carrier / 3 pairs on flatbed area, 1 pair of folding lashing eyes (LC 13,500 daN) on front wall crossmember, 3 pairs of folding lashing eyes (LC 10,000 daN) recessed into outer frame, 8 repositionable trough stops for lateral centering of skip containers, front 4 trough stops inserted with swinging stop. Duomatic coupling head / 15-pin power supply Drawbar 2,100mm plus 500mm lowering device / 40mm DIN towing eye Truck coupling height: approx. 780–980 mm Container length: 5,500 mm – 7,000 mm internal, for 2 x 10 m³ skip containers or construction machinery transport Overall height: approx. 950 mm when unladen (centering edge 970 mm) Technically permissible gross weight up to 20,000 kg Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, refuse collection vehicles, truck cranes and aerial work platforms... Contact us! Financing required? We will gladly provide you with a non-binding financing offer. This offer is subject to change, without guarantee or warranty. Sale subject to prior sale. A reservation requires a down payment of 10% of the purchase price. There is no reservation or claim to availability until the payment is received. The purchase is concluded only upon receipt of payment. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment is received. Payments are accepted exclusively in euros without additional fees for the seller and only via bank transfer or cash. No cheques.

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2 in 1 – suitable for roll-off containers and as a low loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 ton axles Kdsdpfx Aol Tpc Aedkow * Air suspension with manual lowering function at the rear * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design on the right side * Reflective contour tape on the sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffers * Foldable A-board at the rear * LED tail lights * 15-pin electrical connector * Main frame with raised outer frame for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical insertable end stops at the front in the guide rail, load securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair of 10t UVV lashing rings at the front on the headboard carrier as well as 3 pairs of 10t UVV lashing rings on the sides in the outer frame, on each side 4 x 2t lashing eyes in cloverleaf design, as well as 4 x 8t lashing brackets recessed in the outer frame * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at the rear * 1 pair of aluminium loading ramps (10.6t / pair) 2,800 x 470 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * Chassis, bogie, locking parts, rear drop supports hot-dip galvanized * However, drawbar, axles, air tanks painted in black * New vehicle, unregistered, with full manufacturer’s warranty * Subject to prior sale and errors excepted * Available from calendar week 05 / 2026

Stanje: rabljeno, lastna masa: 3.000 kg, največja dovoljena obremenitev: 15.000 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2007, vzmetenje: zrak, velikost pnevmatike: 385/55R22.5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden Kdsdoi Rq Sdepfx Adksw Superstructure: 2-axle hook-lift trailer for containers up to 7 m, 2x 9 t BPW axles, drum brakes, 2x pneumatic locking mechanisms. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, največja dovoljena obremenitev: 18.610 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 7.075 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2023, Oprema: ABS, Immediately available stock vehicle with day registration in 07/2024. ABS, EBS-E, RSS, 3 x 9 t axles (Gigant), steel rims, 235/75 R17.5 tires, drum brakes, automatic slack adjusters, air suspension, lift/lower function, 2nd axle as lifting axle, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal shown on driver’s cab display (truck must be pre-equipped, not a calibrated scale), release valve on front axle, spring-loaded brake on rear axle, two pairs of pneumatic container locks for roll-off containers, toolbox made of galvanized sheet steel approx. 1,000 x 300 x 600 mm, storage box for container net approx. 1,000 x 300 x 600 mm, closed side underrun protection, fixed underrun guard, rear skirt on underrun guard, foldable A-sign, ramp compartment incl. aluminium loading ramps (2,800 mm long, 470 mm wide, approx. 10,600 kg load capacity per pair), hot-dip galvanized chassis, combination lights partly LED, 2 extra LED reversing lights at the rear. Load securing package: 8 units of UVV-certified folding lashing brackets (LC 8,000 daN) mounted to existing hole pattern on outer frame (protruding over material thickness) – arrangement: 1 pair in front of rear crossmember, 3 pairs in the flatbed area; 1 pair foldable lashing eyes (LC 13,500 daN) on bulkhead carrier; 3 pairs of foldable lashing eyes (LC 10,000 daN) recessed in outer frame; 8 repositionable container stops to laterally center demountable containers, front 4 stops positioned with pivoting hold. Duomatic coupling head / 15-pin power supply Drawbar 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Kjdpfjugzqyex Adkjdw Truck coupling height: approx. 780-980 mm Body length: 5,500 mm - 7,000 mm i.Li. or 2 x 10 cbm roll-off containers or construction machinery transport Build height: approx. 950 mm (unladen vehicle, centering edge 970 mm) Technically up to 27,000 kg GVW possible Multiple units available! Hüffermann Krandienst GmbH: We trade, we rent, we repair. Roll-off trailers, roll-off tippers, refuse collection vehicles, truck cranes and work platforms… Contact us! Financing wanted? We will gladly prepare a non-binding financing offer for you. This offer is non-binding and without guarantee or warranty. Subject to prior sale. A deposit of 10% of the purchase price is required for reservation. No reservation or claim to availability exists until payment is received. The purchase is only concluded once payment has been received. The vehicle remains the property of Hüffermann Krandienst GmbH until payment is made in full. Payments accepted only in euros, free of charge for the seller, by bank transfer or cash. No checks accepted.

Stanje: novo, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: * Wabco EBS (electronic braking system) * RDÜ tire monitoring system Ksdpfxjl Thyqo Adksdw * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front, 2 external drop-down supports at the rear * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * Hot-dip galvanized chassis * 15-pin electrical connector * LED rear lights * Closed single plastic mudguards * Foldable A-board at the rear * Plastic underrun protection buffers * Hot-dip galvanized underrun protection with integrated chain storage box, dimensions: W= 370 mm x D= 420 mm x H= 480 mm, front left & right * 2 repositionable skip stops for lateral centering of skips * Skip stops at the front can be inserted in 4 positions with oscillating stop * 2 x 5.3 t UVV lashing rings per side for attaching tie-down equipment * Axles, springs, air tanks and support winch painted in black * Subject to errors and prior sale * New vehicle with manufacturer's warranty * Available from calendar week 05 / 2026

Stanje: rabljeno, lastna masa: 5.100 kg, največja dovoljena obremenitev: 12.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/1998, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1 mm, skupna dolžina: 2.550 mm, skupna širina: 1.600 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, medosna razdalja: 5.400 mm, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container locking system, underrun protection, pneumatically adjustable drawbar, side aluminum underrun protection, twin tires, storage box, removable side panels Kdedpfx Adsi Rpxwekjw Wheelbase: 5400 mm Body: Trailer for roll-off containers with lengths from 6m to 6.75m, SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stops. The trailer can also be used as a flatbed! Aluminum side panels with a height of 600 mm are included with the trailer! Ramps available at an additional price of €900.00 net! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors.

Stanje: novo, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: * Includes 2 ratchet tensioners permanently mounted on the outer frame with chain box * Both sides fitted with eye and quick-shortener, Y-special version, 6.3 t * Tension force with load securing certificate * Wabco EBS * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders Kdsdpfx Ajpk Dyxodkew * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Jost landing gear at the front * 2 x external drop-down supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis * 15-pin power connector * LED tail lights * Closed plastic single mudguards * Foldable A-board at the rear * Plastic impact protection buffers on the underrun guard * Hot-dip galvanized underrun protection with integrated chain stowage box, dimensions W=370 mm x D=420 mm x H=480 mm, front left & right * 2 re-positionable bin stops for lateral centering of bins * Front bin stops with pivoting stop, pluggable in 4 positions * Side-mounted, each with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Axles, springs, air tanks, and landing gear painted black * Subject to errors and prior sale * New vehicle with manufacturer's warranty * Available from week

Stanje: rabljeno, lastna masa: 3.750 kg, največja dovoljena obremenitev: 14.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/1993, skupna dolžina: 2.450 mm, skupna širina: 1.500 mm, vzmetenje: jeklo, velikost pnevmatike: 385 / 65 R 22,5, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, leaf suspension, ABS (anti-lock braking system), lateral aluminium underrun protection Body: 6.0 to 7.0 m container, mechanical locking ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Ksdsi Rmktjpfx Adksdw

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * Load securing package (LASI-Paket) * Wabco system * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 2 x 12 t Gigant axles * Parabolic leaf springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and adjustable height coupling * Tool box made of powder-coated sheet steel, mounted on right side * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Storage box for container nets made of galvanized sheet metal approx. 960 x 300 x 400/450 mm, right side * Plastic rear collision protection buffer * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (~25 mm higher) for guidance of roll-off containers * Steel floor with recesses for rollers in the bogie area * Capable of transporting roll-off containers with a length of 5,500 – 7,000 mm * Pneumatic four-point locking system and mechanical plug-in stop blocks at the front of the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of skips; front 4 bin stops plug-in with pivoting stopper Kdodpfxel Thwce Adkew * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive load securing, 4 cloverleaf-shaped lashing points on each side, and 1 pair of 13.4 t UVV lashing rings at the front; load securing certification per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp track area * Mechanical drop supports at the rear * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles; lockable storage compartment accessible from the rear * 235/75 R 17.5 twin tires * Unladen weight: 4,360 kg * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 48 / 2025

Stanje: novo, največja dovoljena obremenitev: 13.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no installation required on the truck side) * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5 t axles * Air suspension with manual rear lowering * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device * Tool box made of powder-coated steel sheet, plus basket-type spare wheel holder, mounted on the right side * Reflective contour tape on sides & rear * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bump stops * Folding "A" sign at the rear * Multi-chamber tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame for container guidance * Steel floor with recessed roller tracks in bogie area * Suitable for container transport with bodies from 5,500 - 7,000 mm long * Pneumatic 4-point container clamp locking system as well as mechanically insertable stops at the front of the running track * Load securing certificate according to DIN 30722-1 * Can transport up to 2 skip containers with a maximum volume of 10 m³ * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops inserted with pendulum stops * 3 pairs of 10 t UVV lashing rings on the sides for securing load with tensioning devices, 4 cloverleaf-type lashing bars per side, and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with 4 x 8 t lashing eyes each recessed into the outer frame per side Kdedpewb Rakofx Adksw * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead applied as anti-slip coating in run-up area of the ramp incline * Mechanical rear support legs * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage from the rear) * --Permissible total weight of 20,000 kg technically feasible-- * New vehicle without first registration, with manufacturer's warranty * Errors and subject to prior sale * Available from calendar week 41/2025

Stanje: novo, največja dovoljena obremenitev: 14.680 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2025, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring brake cylinders * Disc brakes * 2 x 11 t Sauer axles * Air suspension (automatically lowers when decoupling the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Plastic toolbox 450 x 470 mm, mounted right side * Side net box 1,000 x 500 x 500 mm * Enclosed plastic mudguards front & rear * Enclosed side underrun protection usable as advertising panel * Rear underrun guard * Rear plastic impact protection buffers * Dangerous goods sign at the rear * 15-pin power connector * LED tail lights * Roller track length approx. 6,830 mm * Pneumatic 4-point clamp lock * Mechanically adjustable stop brackets (2 positions) front left and right on running rails * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * --Permissible gross weight technically possible: 20,000 kg-- * Approx. 1,130 mm ride height loaded * Suitable for 5,500 - 7,000 mm container lengths * Hot-dip galvanized chassis * Air tanks, axles, slewing ring, and drawbar * New vehicle with manufacturer’s warranty Kodpsv Nulzjfx Adkjdw * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2025, * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross clamping units * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when disconnecting the brake) * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 858 x 500 x 500 mm, right-hand side * Storage box for container net made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side mounted * Enclosed plastic mudguards, front & rear axles * Enclosed side underrun protection (RAL 9010 pure white) usable as advertising space * Rear underrun protection * Plastic rear impact buffers * Foldable A-sign (warning sign) * Hazardous goods sign with document holder and rear reflective parking warning panel * 15-pin electrical connector * LED lighting system with protective cover * 2 LED reversing lights (activated via reverse gear) * Additional loading from the front with lowered running rails at the rear and insertable stop * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions), front left and right on the running rails * Roller track length approx. 6,830 mm * Pneumatic 4-point clamp lock * For transport of external roll-off containers according to DIN 30722 part 1 – Dekra load securing certificate available * Loaded platform height approx. 1,130 mm * Chassis and locking parts hot-dip galvanized * Air reservoir, axles, turntable, and drawbar painted in a shade of black * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer’s warranty Kodel Tn U Rjpfx Adkjdw * Subject to errors and prior sale * Available immediately ex Egestorf