Müller-Mitteltal Prikolica Na Rolo nakup rabljenega (247)

Stanje: novo, največja dovoljena obremenitev: 6.110 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * KWH 8.8 ML: * RDÜ Tire Pressure Monitoring Hedpfx Asu I Iqrjghepa * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Wind * Rear spring-assisted square tube supports with base plate, safety locking bolts for various support heights * Drawbar with 40 mm bolt-on towing eye (height adjustable, mm) * 15-pin power connector * LED Lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossmembers * Enclosed steel mudguards with splash protection * Enclosed lateral underrun protection, can be used as an advertising surface * Plastic toolbox with floor lining (horizontal installation), approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with clamp lock for securing drum at carrier arm ends, as well as a central claw lock to secure drum assembly to chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-covered drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of centering cones made of polyamide, stepwise offset * Hydraulic pump unit with petrol engine * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight 2,690 kg * Vehicle hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.100 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2001, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna teža: 13.500 kg Lastna teža: 3.400 kg Nosilnost: 10.100 kg Hpjdpfx Aow Nu I Tsghsa Skupna dolžina: 8.100 mm Nakladalna dolžina: 6.000 mm Širina: skupna širina 2.550 mm / širina kesona 2.460 mm Višina nakladanja: ca. 1.000 mm Dodatne informacije - Pnevmatske gume: 285/70R19,5 - Stranske stene 400 mm, 1x deljene

Stanje: rabljeno, največja dovoljena obremenitev: 8.000 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2000, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Gross weight: 11,000 kg Unladen weight: 3,000 kg Payload: 8,000 kg Overall length: 7,450 mm Loading length: total 5,600 mm, including rear sloping section 1,000 mm Width: overall width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Further information - Sideboard height: 400 mm, split, foldable - Split spring-assisted ramps, dimensions approx. L: 3,380 mm W: 600 mm - Ramps covered with phenolic resin-coated plywood - Large lashing package - BPW axles Hpedpfx Agswz Drgohsa - Tyres 235/75 R17.5 - LED reversing lights - Plastic toolbox

Stanje: rabljeno, največja dovoljena obremenitev: 30.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2007, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.520 mm, skupna širina: 2.550 mm, Gross weight: 24,000kg / 40,000kg Unladen weight: 9,650kg Payload: 14,350kg / 30,350kg Overall length: 11,750mm Loading length: total 9,800mm, gooseneck approx. 2,400mm, lowbed incl. rear support approx. 7,400mm Width: 2,550mm Loading height: 860mm Hodpfxowlyx Rs Aghjpa Additional information: - Long, two-piece ramps with hydraulic operation - Excavator bucket rest - Twin tyres 235/75 R17.5'' - Wheel recesses - BPW axles - Comprehensive lashing package - Warning plates - 3m widening - LED reversing lights - Headboard total 2,000mm For further information, please contact:

Stanje: rabljeno, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2017, naslednji pregled (TÜV): 10/2025, Müller Mitteltal 3-Axle Low Loader Trailer with Ramps Type T3 Profi Hpsdpfev Hl Riex Aghoa Gross weight: 24,000 / 30,000 kg Payload: 17,940 / 23,940 kg Unladen weight: 6,060 kg Overall length: 10,800 mm Loading length: 8,300 mm / Loading bed: 6,500 mm Loading height: 900 mm Parabolic suspension Extensions with warning panels Heavy-duty lashing package Long ramps with spring assist Toolbox Storage compartment in gooseneck Vehicle available immediately. More new and used 3- and 4-axle low loader trailers available immediately. For more information, please contact:

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Equalizer block for low-bed semi-trailers incl. container locks. Price per equalizer block. -- Subject to typographical errors, mistakes, and changes. Sample images --. More data at: !, More Details: ! Hsdpexpwh Isfx Aghspa

Stanje: rabljeno, skupna masa: 46.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, naslednji pregled (TÜV): 06/2024, Oprema: ABS, * 3 osi * Zadnja krmiljena os * BPW osi * Pnevmatske gume 235/75R17,5 * Vdolbine za kolesa * Hidravlične rampe * Skladiščna škatla Hedpfx Asxy Ehdoghjpa ----Interna številka vozila 11304-----Pridržujemo si pravico do napak in vmesne prodaje

Stanje: rabljeno, lastna masa: 3.370 kg, največja dovoljena obremenitev: 8.630 kg, prva registracija: 10/2011, naslednji pregled (TÜV): 06/2024, skupna dolžina: 9.600 mm, skupna širina: 25.500 mm, skupna višina: 10.500 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R17.5 / 10mm, velikost sprednje pnevmatike: 235 / 75 R17.5 / 10mm, obratovalna teža: 12.000 kg,

Stanje: novo, največja dovoljena obremenitev: 38.900 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T5 profile 50.0: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle steering (axle lock for manoeuvring can be activated from the cab without additional truck-side installation, and additionally via a switch on the trailer); the lock must be disengaged before driving on public roads * Air suspension, lift and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm with lifted axle) * Forced relief and forced lowering of the lift axle for manoeuvring (requires truck-side installation), speed-dependent activation via EBS * Smartboard infotool with pressure sensors for total axle load display per axle group * TPMS with display option in the truck via EBS signal (no truck-side installation required) * Mechanical warning sign kit for 3m total width * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment * LED lighting system 12/24 V * Removable rear LED beacon * Toolbox, galvanised steel approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle, galvanised steel mud guards rear axle * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to rear) * Shortened low-loader deck by 500 mm to 6,280 mm incl. extended step by 500 mm to the front * Load securing package: 2 x 6.4 t lashing rings front corners, side front & rear corners each 2 x 13.4 t UVV lashing rings, 5 x 10 t UVV lashing rings per side (pivoting/lowering and loadable in all directions), 4 stake pockets per side additionally providing 2 t lashing option, 1 x 16 t UVV lashing ring on rear traverse * Rubber matting on folding ramp, approach slope, and low loader running surface * Bamboo wood inserted between main beams in excavator arm storage area * Extendable and folding outrigger extensions for 3 m total width (beam holder under chassis, right side) * Continuous excavator arm storage with reinforcement profile from last axle to rear cross member approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on sides * Hydraulic folding ramp with dual-line hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic capacity over 40 l/min up to 140 l/min) Hedpfx Asxptn Dsghjpa * Loaded platform height 890 mm +/- 20 mm (via air suspension) * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach ramp * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanised * Drawbar, axles, hydraulic axle supports, and air tanks painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 14/2026

Stanje: novo, največja dovoljena obremenitev: 20.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 flatbed: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering function and RTR feature * 1st axle liftable * Last axle as trailing steering axle with electro-pneumatic steering lock triggered via reverse gear pin (lock of the trailing axle from the towing vehicle for shunting purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for shunting only, not for public road traffic) * SmartBoard control box as information tool with pressure sensors for total axle load indication * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the loading slope * Foldable rear stanchions * Steel tailboard inserted in front of the rear stanchions * Mechanically adjustable warning sign package front and rear * Toolboxes made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm, mounted on the right side * 15-pin power connector * LED taillights * Removable LED beacon including bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm plug-in steel front wall * Perforated outer frame, bent approx. 45 degrees with fixture for mounting 3 t folding lashing rings * In each corner: 1 x 10 t lashing ring; additionally, 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various boreholes in front and end beams for 1.2 t lashing options * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-way hydraulic control block for optional retrofitting of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, loading ramps hot-dip galvanized Hedpfx Ajr Dpzxsghspa * Axles, air tanks, flange eye and front landing gear painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from week 13/2026 * Sample images

Stanje: rabljeno, lastna masa: 3.680 kg, največja dovoljena obremenitev: 10.720 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2021, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, KOT NOVO, široke pnevmatike, kiper ploščad CINKANA, 12 pritrdilnih obročev, stranske stene 600 mm, doplačilo za rampe 1.000 €, -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo! Hpedpfxex Hpuqj Aghoa

Stanje: rabljeno, največja dovoljena obremenitev: 22.450 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2018, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 11.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Leto izdelave: 2018, Oprema: ABS, Whatsapp/Viber (deutsch/english/arabian) : Whatsapp (deutsch/english) : ---- * Müller MItteltal TS2 Profi * hydraulische Rampen * Lenkachse * Seilwinde * Plattform 8m * Ladehöhe ca. 90cm * Gesamtladefläche 11,5m * Leergewicht 8.550kg * Containerverriegelung vorn * Luftfederung * SP 11.2026 * TÜV 05.2026 Hjdpex Hcuwefx Aghspa ## deutscher Auflieger aus erster Hand ## Finanzierung/Leasing/Mietkauf auf Anfrage möglich ----Werbung / Firmenlogos auf den Fahrzeugen können eventuell auf den Bildern digital entfernt worden sein. ----Ansprechpartner Telefonisch oder WhatsApp: (deutsch, englisch, arabisch) (deutsch, englisch) ----Wir freuen uns auf Ihren Besuch, um diesen so angenehm wie möglich zu machen, bitten wir um eine Terminvereinbarung. ----Irrtümer, Fehler und Zwischenverkauf vorbehalten. Alle Angaben ohne Gewähr, insbesondere Ausstattung und Zubehör.

Stanje: rabljeno, prva registracija: 06/2010, dolžina tovornega prostora: 11.350 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, - Krmiljena os - Daljinsko upravljanje - Hidravlične rampe - Zgornja nakladalna površina 3500 mm - Spodnja nakladalna površina 7850 mm Hpodpfxjx Dzn Ue Aghea

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/1999, dolžina tovornega prostora: 4.990 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 870 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, 3-stranski kiper nadgradnja, jeklene stranice 880 mm, nastavljiva vlečna oj, vlečni obroč 50 mm, Jost podporna noga, ABS, BPW Eco os(i), bobnaste zavore, zračno vzmetenje, vzvratne luči, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Hpsdpfx Agjw Ndqqshsa Naša ponudba je načeloma brez nove TÜV tehnične pregleda. Če želite nov TÜV pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila. Za to vozilo vam z veseljem pripravimo ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 5.000 kg, skupna masa: 7.200 kg, konfiguracija osi: 2 osi, prva registracija: 04/1979, Leto izdelave: 1979, Tristrani kiper prikolica v izvedbi za 80 km/h, dvokrožni pnevmatski zavorni sistem, zadnji priklop z hidravličnim priključkom in zavorni priključki za dodatno prikolico. Jeklene stranice. Po navedbah lastnika je prikolica v dobrem, delujočem stanju! Prodaja v videnem stanju, brez TÜV, po naročilu stranke. Gotovinska cena: 4.500,00 € Hedpfx Aoxzzgleghspa

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 09/1993, Leto izdelave: 1993, Oprema: ABS, = Further Options and Equipment = - Electronic Braking System (EBS) = Notes = Müller-Mitteltal low-loader trailer 2-axle low-loader trailer ZSA Loading ramps ID No. 892 Processing We look forward to advising you Contract signing or vehicle collection at our dealership. Please arrange an appointment. If you cannot come to our dealership, we offer the complete transaction via phone/email/WhatsApp/fax. On request, we will deliver your new vehicle directly to your door. This means for you: the best price, maximum safety and convenience when handling the transaction. Hjdpfoxt Rw Rox Aghjpa We are also happy to accept your used vehicle in part exchange. We offer you the possibility of a digital vehicle evaluation based on your vehicle pictures, even without a visit to our premises. Our specialised purchasing team guarantees you the best possible price. If you wish, we can deliver your new "used" vehicle nationwide directly to your doorstep and take your trade-in with us. Financing - Leasing Immediate approval and settlement of existing loans Your specialist partner for passenger cars, transporters, commercial vehicles and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Always over 400 vehicles in stock All details in adverts, online, price labels and images are non-binding descriptions, and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or transmission errors. Listed features may need to be checked separately. The offer is generally made without new MOT. We are happy to provide an offer for inspection at our partner workshop. Errors and prior sale excepted. = Further Information = Unladen weight: 4,600 kg Payload: 13,400 kg Gross Vehicle Weight: 18,000 kg Sale price: €6,500, US$7,562

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lift and lower system, including RtR valve * Hill-hold assist for maneuvering, switchable to the first axle via EBS (no truck-side installation required) * SmartBoard as an infotool mounted on the trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Lock for the trailing axle actuated from the cab for maneuvering purposes via EBS (no truck-side installation required) * Second king pin position 2 * Side underrun protection, landing legs at the front and swing-down support legs at the rear of the chassis * 15-pin electrical socket * LED lighting 12/24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display possibility in the truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning panel kits at the front and rear * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Fifth-wheel platform with 45° chamfered front corners and a front-mounted toolbox made of galvanized, powder-coated sheet steel, B = 2,480 x H = 500 x L = 665 mm, with hinged lid * On the side of the fifth-wheel platform, 400 mm aluminum drop and removable side walls (in RAL color of choice) * Rear wall – inserted to 150 mm height Hedjtpta Dspfx Aghopa * Rear slope on the fifth-wheel platform to the lowbed approx. 700 mm long with checker plate covering, and a perforated strip at the end for attaching aluminum drive-on ramps * Fifth-wheel platform with 50 mm clamped wood planks, and low-bed platform with 60 mm clamped wood planks * Tear plate above the axles * 9 x mechanical folding extensions for an overall width of 3 meters, but not on the rear slope (extension boards available with transverse closed storage compartment beneath the loading area) * 3 storage compartments under the fifth-wheel platform for optional aluminum drive-on ramps or wooden planks for covering wheel recesses * Swivel arm as carrier for connection lines from the truck to the trailer * Load securing package includes: on the fifth-wheel platform, perforated outer frame with 45° angled profile, with hole pattern for lashing equipment (2 t lashing force per lashing point at a minimum spacing of 480 mm) * On each side, 3 x 13.4 t recessed lashing rings in the floor (1 on the fifth-wheel platform, 1 on the longitudinal beam after the gooseneck, and 1 over the middle axle next to the longitudinal beam) * On each side, 3 x 13.4 t lashing rings on the outer frame (1 at the start of the fifth-wheel platform gooseneck, 1 at the start of the ramp, 1 at the end of the ramp) * On each side, 2 x 10 t lashing rings (1 between the front wheel recess and first axle, 1 between the second and third axles) * On each side, 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) * Extended excavator arm trough, continuously from the end of the last rigid axle over the steering axle up to the rear, with internal reinforcement profile approx. W = 770 mm, rear depth = 270 mm / front depth 170 mm, on each side 2 x 6.4 t lashing rings in the excavator arm trough * On each side, 2 wheel recesses, 390 m

Stanje: rabljeno, največja dovoljena obremenitev: 25.400 kg, skupna masa: 35.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2003, Oprema: ABS, Int. št.: B - 12 Po naročilu stranke * Müller Mitteltal * TTS-VLL * Dvoosna polprikolica * Nizkopodni priklopnik * Kolutne vdolbine Hsdpfx Agsxvf Tfohspa * Hidravlične rampe Možna menjava starega za novo Financiranje od 3,99 % Napake in vmesna prodaja pridržani! Podatki v tem oglasu so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Oprema navedena v oglasu je treba preveriti posebej. Vse informacije v oglasih so nezavezujoče! Dostava po celotni Nemčiji na zahtevo Odpiralni čas: ponedeljek do četrtek od 9:00 do 17:00, petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Storage compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, -- printing errors, mistakes and changes reserved, sample images --, For more data see: !, More details: ! Hpodpjxnx Rnjfx Aghja

Stanje: rabljeno, največja dovoljena obremenitev: 29.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 14.910 mm, širina tovornega prostora: 2.520 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, Low bed 5500 mm, extendable to 3000 mm, foldable extensions, loading height: approx. 630 mm, gooseneck dimensions (LxW) 3510x2485 mm, aluminum side walls 400 mm, height difference between gooseneck and bed: 845 mm, high bed 4220 mm, rear ramp: 870 mm, front ramp: 880 mm, hydraulically operated ramps, laterally adjustable (LxW) 2800x800 mm, electro-hydraulic unit for hydraulic functions, NATO jump-start socket, 8 heavy-duty lashing rings per side, 3 lashing brackets per side, rotating beacon, support winches, folding rear supports, extendable warning boards, ABS, EBS, BPW Eco axle(s), hydraulically forced steering axles, drum brake system, air suspension with lift-lower function. Vehicle may be wrapped or labeled with advertising. Hodpfx Aoxvwb Ieghepa Our offer does not include a new technical inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may be wrapped or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-way Tipper Trailer with Ramps, NEW VEHICLE * Immediately available in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Inquiry No. 24906 * Remote diagnostics with display option in the truck via EBS signal * Side marker lights with indicator activation * Gross weight: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m x 0.5m, laser-welded drop sides, pendulum-mounted, folding, and removable, prepared for retrofitting side extensions * Lockable compartment under the tipping platform for loading ramp * Incl. 1 pair of aluminium approach ramps, 8t per pair, 3.57m length * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV-certified lashing rings LC 5000daN front and rear + 8 folding, recessed lashing rings (centered) LC 3000daN on the tipping floor * Excavator bucket rest made of hardwood Hpsdpjwvx Tbofx Aghja * Two-step access ladder in front of the front wall (hot-dip galvanized) * Continuously height-adjustable drawbar, hot-dip galvanized, tow eye 40mm * Wide tires 385/55R 19.5 (4x), parabolic springs * Net hooks, rear stakes bolted on, hot-dip galvanized * Bracing cables for the rear side wall * Plastic toolbox on the right-hand side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights on the rear of the trailer * Hire-purchase price: * E.g. €550 for 60 months with no down payment and no final residual value. An offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment available. * Request a quote from us! * We are Müller-Mitteltal authorized dealer ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours available by appointment We speak German, English, Polish, French WhatsApp / Facetime

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal—no truck-side installation required * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer assembly * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front right side of the chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks in the central locking area as well as 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced Strong sideboards (continuous upper side walls with internal reinforcement tube—without center stanchions—can be folded down with board wall assist spring) * Bolted rear stanchions * Combination steel swing rear doors, 2-wing asymmetrically split, swiveling and lockable up to 270°—not foldable—additionally with pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at rear and central locking system, deactivation function for automatic tailgate when tipping backwards with opened swing door * Each corner fitted with 1 x 5 ton lashing point and 4 x 3 ton lashing rings on each side, recessed into the outer frame * 4 mm floor plate made of fine-grain steel * Rear guide rail for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons/pair), suitable for pneumatic-tyre and tracked vehicles * Lockable storage compartment from the rear, recessed under the loading deck in the chassis for the ramps * Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a black tone * Tires: 358/55 R 19.5 * Sideboard paint finish in RAL 9010 pure white * Custom RAL colors for side walls available at extra cost Hpodex Hm Rijpfx Aghea * Errors and prior sale excepted * Immediately available from calendar week 10/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2025, * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brake * SAF axle * Parabolic springs * Drawbar as central pole with 40 mm bolt type towing eye * Stepless drawbar height adjustment with spindle lifting device instead of a fixed drawbar * Standard coupling height approx. 900 mm (+/- 150 mm) * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Support winch at front * Closed plastic mudguards * Foldable underrun protection for road paver Hpedpow Ndr Uefx Aghja * 15-pin electrical socket * LED tail lights * Flashing side marker lights * Chassis made of fine-grained steel * Pallet—three-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls—continuous, without central stanchion—foldable with long-path locks and swingable via manual central locking * 800 mm high steel tailgate with automatic tailgate opening during tipping to the rear * 4 mm Hardox 450 steel floor * Two pairs of 3 t lashing rings recessed and foldable in the steel floor on each side * Chassis, drawbar, underrun protection hot-dip galvanized * Tipper body painted in a RAL colour of choice up to 6 weeks before delivery possible (excluding metallic and special colours) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling * 2 x SAF axles (2 tons each) * Air suspension with lowering function via radio remote control * 1st axle as a (fully automatic) lift axle * Lift axle with driving height +30 mm via adjustment cylinder * Start-assist function for shunting purposes and forced lowering on the first axle – controlled by speed-dependent EBS electronics – (no installation required on truck side, additionally with cable for control from tractor) * 50 mm flange drawbar eye – height-adjustable by +77 mm and -33 mm – for 2-ton vertical load * BPW landing gear jack at front * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connecting cables for agricultural and forestry vehicles * Power supply for wireless control 12+24 V via tail light circuit * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-cut aluminum wheels * Detachable pin tow coupling (use only when underride guard is retracted) * Enclosed plastic single mudguards * Two-step access ladder in front of bulkhead, driver's side * Shovel and broom holder in front of bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising panel Hodpfjx Dp Agex Aghepa * 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on driver's side rear) with radio remote control operation * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year of manufacture 2023) * Base frame made of high-tensile fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift control via radio remote control * Remote control with quick function for tipping, but not for winching * Emergency stop switches on left and right sides * Container mounting with 4 lateral supports and one roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at the rear * Approved for 20 tons gross weight (2 x 9-ton axles) and 2-ton vertical load * Loading height unladen approx. 1,300 mm with lowered lift axle * Note: If the remote control is outside the charging cradle, the service brake must be engaged to enable radio release. The brake connections must remain permanently attached to allow hydraulic/pneumatic valve actuation. * Monitoring system for underrun protection to ensure it is retracted when tipping * Chassis, drawbar, access steps, underride guard, and drop supports hot-dip galvanized * Axles, air tanks, and landing gear jack in front painted in black * Palfinger hooklift painted in black/yellow * Errors and prior sale excepted * Vehicle is in very good / as-new condition * Vehicle available immediately

Stanje: novo, največja dovoljena obremenitev: 6.110 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * KWH 8.8 ML: * TPMS (Tire Pressure Monitoring System) * EBS brake system * Drum brakes * BPW axle * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights Hpodsu I Iqfopfx Aghsa * Drawbar with 40 mm screw towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Enclosed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm with clamping lock to secure the drum at the support arm ends and a central claw locking device securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotatable ends * 1 pair of polyamide centering cones with stepped offsets * Hydraulic pump unit with petrol engine * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf