Prikolica z nizko platformoMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Prikolica z nizko platformo
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Stalna cena brez DDV
27.900 €
(33.201 € bruto)
Leto izdelave
2025
Stanje
Novo
Lokacija
Egestorf 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Stalna cena brez DDV
27.900 €
(33.201 € bruto)
- Lokacija prodajalca:
- Eichenstich 12, 21272 Egestorf, Nemčija

Klic
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 8.650 kg
- Skupna masa:
- 11.900 kg
- Konfiguracija osi:
- 2 osi
- Dolžina tovornega prostora:
- 5.000 mm
- Širina tovornega prostora:
- 2.420 mm
- Višina nakladalnega prostora:
- 500 mm
Podrobnosti ponudbe
- ID ponudbe:
- A104-26-970
- Št. reference:
- 61561
- Nazadnje posodobljeno:
- dne 19.12.2025
Opis
* KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
Itedpfx Asl Thw Ijb Uer
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic suspension with tandem equalizer
----Drawbar / Flange Eye:
* Height-adjustable drawbar (300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural tractor units
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic tool box mounted on right side
* 2-step boarding step, front left in direction of travel
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear, located in the central locking mounts, as well as 2 units on the bulkhead
* Steel pallet - 3-way tipper body (continuous side walls – without central stanchions –, foldable with drop side spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor plate
* Rear ramp mounting track
----Load Securing:
* Each corner equipped with 1 x 5 t lashing point
* Additionally, 4 x 3 t lashing rings recessed into each outer frame
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis, accessible from rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, bulkhead, drop sides, folding supports and rear stanchions hot-dip galvanized
* Springs, air tanks, flange towing eye and landing gear painted in black
* Drop sides hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
Itedpfx Asl Thw Ijb Uer
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic suspension with tandem equalizer
----Drawbar / Flange Eye:
* Height-adjustable drawbar (300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural tractor units
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic tool box mounted on right side
* 2-step boarding step, front left in direction of travel
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear, located in the central locking mounts, as well as 2 units on the bulkhead
* Steel pallet - 3-way tipper body (continuous side walls – without central stanchions –, foldable with drop side spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor plate
* Rear ramp mounting track
----Load Securing:
* Each corner equipped with 1 x 5 t lashing point
* Additionally, 4 x 3 t lashing rings recessed into each outer frame
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis, accessible from rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, bulkhead, drop sides, folding supports and rear stanchions hot-dip galvanized
* Springs, air tanks, flange towing eye and landing gear painted in black
* Drop sides hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
Pošlji zahtevo
Telefon & Faks
+49 40 33... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake





























































