Prikolica z nizko platformo

MÜLLER-MITTELTAL 14,4 to. Tandem Tieflader mit Auffahrrampen

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: * TPMS (tire pressure monitoring system) * Electronic brake system (EBS) Isdpfx Asxglibeb Uotr * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic suspension with equalizing unit * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * Jost landing gear at front * Externally mounted hot-dip galvanized folding rear supports * Plastic toolbox, front right outside on the headboard * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Headboard * Rear wall * Tailgate and loading ramps * 50 mm softwood flooring * Pre-installed fittings in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Drop-side panels made of trapezoidal-profile steel sheet, foldable, with drop-side lifting assist * Rear wall, made of steel, can be slid in between the ramps – storage bracket inside in front of the headboard when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm; installation of 3 t folding lashing rings every 600 mm possible; in the front and rear corners, 1 x 6.3 t lashing ring each; in the front and end crossmember, various holes for 1.2 t lashing options * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed down to 20 mm) * Rear access slope approx. 860 mm * --Reinforced and certified bodywork according to EN 12642 XL, including load securing certificate-- * Drop-side colour in RAL 2011 deep orange * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 08/2026 * Sample photos

Stanje: rabljeno, moč: 54,5 kW (74,10 KM), vrsta goriva: dizel, barva: rumena, Leto izdelave: 2000, obratovalne ure: 2.826 h, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler JCB, model: 535-95 4x4x4, first use: 2001, LIFTING CAPACITY: 3,500 kg, LIFTING HEIGHT: 9.50 m, 4-cylinder PERKINS diesel engine (model: 1906/2200 – 74.12 hp / 54.50 kW at 2,200 rpm), PALLET FORKS, QUICK COUPLER, ADDITIONAL HYDRAULICS, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, FRAME LEVELLING SYSTEM, LOAD MANAGEMENT SYSTEM, ROPS / FOPS (operator protection), trailer hitch, large operator cab (with tinted glass), FRONT WORK LIGHTS, road lighting, COMFORT SEAT, three WINDSHIELD WIPERS, two EXTERNAL MIRRORS, WARNING BEACON, heating / ventilation, lashing and transport points. Tyres: ROUGH TERRAIN TYRES (15.5/80 – 24) – all around approx. 98%. Transport dimensions: Length: approx. 6,200 mm (approx. 5,100 mm without forks), Width: approx. 2,270 mm, Height: approx. 2,470 mm. Ijdjvfdlijpfx Ab Uetr FINANCING AVAILABLE / WORLDWIDE TRANSPORT AT FAVORABLE RATES / FOR EXPORT ONLY NET PRICE PAYABLE! © pb

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: * RDÜ (tyre pressure monitoring system) * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizer unit * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at front * Externally mounted, hot-dip galvanized foldable stabilizers at rear * Plastic toolbox, front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Tailboard * Tailgate and loading ramps * 50 mm softwood floor * Pre-equipped at the bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Side panels made of trapezoidal profiled steel, foldable with sideboard spring assist * Steel tailboard, can be slid between ramps (with bracket for storage inside the bulkhead when not in use) * Removable steel end stanchions, bolted * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm; option to install 3 t lashing shackles every 600 mm; in each front and rear corner, 1 x 6.3 t lashing point; various pre-drilled holes in the bulkhead and end traverse for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including cargo securing certificate-- * Sideboard color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Errors and prior sale excepted Ijdpfx Abexglh Ro Uotr * Available from calendar week 08/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency Release Device for Spring Brake Cylinders Iedpfx Aervvfleb Uetr * LED Lighting * Drum Brakes * 2 x 7 t Gigant Axles * Parabolic Springs with Equalizer Unit * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Jost landing gear at front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on bulkhead, made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet, foldable, with sideboard lifting springs * Rear wall made of steel, slidable between the ramps (with the holder stored inside the bulkhead when not in use) * Bolt-on rear corner stanchions * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm; option to install 3 t drop lashing rings every 600 mm; in each front and rear corner, 1 x 6.3 t lashing ring; various holes in bulkhead and rear crossmember for 1.2 t lashing points * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm height) * Rear approach angle approx. 860 mm * -- Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate -- * Drop side color RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available ex works from calendar week 08/2026

Stanje: skoraj kot novo (rabljeno), prevoženi kilometri: 113.000 km, Leto izdelave: 2021, FORD TRANSIT CUSTOM MAXI 2021 DIESEL HYBRID, ENGINE SIZE 2.0L, 113,000 KM. TIMING BELT AND SERVICE JUST PERFORMED. AIR CONDITIONING, FACTORY STEREO, CRUISE CONTROL, PARKING SENSORS. SINGLE OWNER. 1-YEAR WARRANTY. FINANCING AVAILABLE. Iedpfxov H Dkhe Ab Uetr

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring system * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensator unit * Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front landing gear (support winch) * External foldable rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * In front of the front wall and rear slope, preparation for retrofitting container locks for transporting 20" containers * Bolted smooth sheet metal front wall * Drop-down steel side walls – trapezoidal profile – split once in the middle * Insertable steel rear wall; can be stored inside in the ramp holder at the front wall when not in use * Bolted rear corner posts * Perforated outer frame, kinked at approx. 45 degrees, 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm; each front and rear corner with 1 x 6.3 t lashing point; various boreholes in the front and end crossmembers for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) Itedpfov Eq Evox Ab Usr * Rear entry slope approx. 860 mm chassis * Drawbar, front wall, tailgate, foldable supports and loading ramps hot-dip galvanized * --- Axles, springs, air tanks, flange drawbar eye as well as landing gear painted in a black tone --- * Reinforced and certified body according to EN 12642 XL incl. load securing certificate -- * Wheelbase 1,140 mm * Side wall painting in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra cost * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring system * Brake system - EBS * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with balancing unit * Drawbar height-adjustable by approx. 300 mm – drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, front right exterior at the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Pre-fitted at front bulkhead and rear slope for optional retrofitting of container locks for 20" container transport * Bolted bulkhead made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet – center hinged, split in 1 section * Steel rear wall, can be stored between ramp brackets; when not in use, stowed inside at the bulkhead * Bolted rear stanchions * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings possible every 600 mm; in each front and rear corner 1 x 6.3 t lashing ring; various holes in the front and rear cross-members for 1.2 t lashing points * One-piece mechanical steel grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Rear approach slope, chassis approx. 860 mm * Drawbar, bulkhead, tailgate, drop-down supports and ramps hot-dip galvanized * --Axles, springs, air tanks, flanged towing eye and support winch painted in black -- * Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Wheelbase 1,140 * Side wall paintwork in RAL 9010 pure white * Side wall painting in an RAL color of your choice available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 47/2025 Iodjv D Tcbopfx Ab Uotr