Müller-Mitteltal Prikolica Na Rolo nakup rabljenega (240)

Stanje: novo, skupna masa: 24.000 kg, največja dovoljena obremenitev: 18.900 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes * TPMS (Tire Pressure Monitoring System) * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Middle axle liftable * Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye and height adjustment * Toolbox made of powder-coated steel sheet and spare wheel holder in basket design, mounted right side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter-mudguards with spray protection * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor plate with roller recesses in bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically pluggable front stop angles in track guides * Load securing certificate according to DIN 30722 - 1 Crodpfx Aotplv Ted Ush * Transport of up to 2 skip containers possible with a maximum of 10 m³ volume each * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with swingable stop * 3 pairs of 10 t safety lashing rings (UVV) on sides for securing inserts to ensure positive and non-positive locking of skips * Each side with 4 cloverleaf-style lashing rails, plus 1 pair of 13.4 t safety lashing rings (UVV) to the front * Load securing certificate to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip surface in the run-up area of the ramp incline * Mechanical drop supports at rear * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Tires: 235/75 R17.5 * Loaded ride height approx. 1,003 mm * Payload 18,900 kg * Technically permissible gross weight of 27,000 kg * Axles, turntable, drawbar and air tanks painted black * New vehicle, unregistered, with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 50/2025

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation necessary * 15-pin power connector * LED lighting * Landing gear at the front * Rear fold-out support legs mounted externally * Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right-hand side of the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks Codpfjl Th Dfox Ad Uerh * Bolted bulkhead made from smooth sheet metal * Steel side walls – trapezoidal profile – foldable, split once in the center * Steel rear wall can be slid in between the ramps; mounting fixture for storage inside in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing brackets possible every 600 mm – 4 lashing rings installed on each side * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes for 1.2 t lashing options in the front and rear cross members * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding support legs and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and landing gear painted in black * Side wall color freely selectable up to approx. 2 weeks before production date, but no metallic or special colors * --reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available in Egestorf

Stanje: novo, skupna masa: 19.000 kg, največja dovoljena obremenitev: 14.660 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 19.0: * Wabco EBS braking system * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalization unit Codpfx Adel Th Hlj Ujrh * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing leg at front * External folding supports at rear * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED rear lights * 50 mm softwood floor * Fitting in front of bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Side walls made of trapezoidal steel sheet, folding with sideboard spring assist * Steel rear wall can be inserted between ramps – storage bracket for unused position inside at bulkhead * Bolted rear stanchions * Perforated outer frame approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * In each corner at front and rear: 1 x 10 t lashing ring; various holes for 1.2 t lashing option in head and end crossmembers * One-piece mechanical grating ramps with spring system for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps, and folding supports hot-dip galvanized * Sideboard paint finish in RAL 9010 pure white * Side wall paint in any RAL shade available at extra cost * Axles, springs, air tanks, flange towing eye, and landing leg painted in black * New vehicle with full manufacturer's warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: * Loading area: 5.37 m * TPMS (Tire Pressure Monitoring System) * EBS braking system Credjl Th Ncjpfx Ad Ujh * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensator unit * Drawbar height-adjustable by approx. 300 mm * Jost landing gear, front * External folding support legs, rear * Plastic toolbox, front right, outside on the bulkhead * Side underrun protection * LED lighting * Plastic quarter mudguards * 50 mm softwood floor * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled sheet steel, foldable, with drop-side lift assist * Steel rear wall, slidable between the ramp brackets, can be stored inside in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, bent approx. 45° with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Front and rear corners each with 1 x 6.3 t lashing ring * Various 1.2 t lashing options in bulkhead and rear crossmember (with pre-drilled holes) * One-piece mechanical grating ramps with spring-assist for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach slope approx. 860 mm chassis * Drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tank, 40 mm flange towing eye painted in black * Wheelbase: 990 mm * Tyres: 235/75R17.5 * Side wall paintwork in RAL2011 deep orange * Side walls available in any other RAL color for an extra charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.950 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, * ETÜ-TA-ER 14.4 Flatbed: * TPMS (Tire Pressure Monitoring System) * EBS (Electronic Braking System) Cedpfsq Dyvnox Ad Ujrh * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 ton BPW axles * Air suspension with lifting and lowering function * Mechanically adjustable 3 m warning sign boards at front and rear * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * Landing gear crank at front * External folding support legs at rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at rear (activated via reverse gear) * 1 removable LED beacon (including bracket) at rear * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable * Locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN conform) with an absolute external width of 3,000 mm * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm, installation of 3 t drop lashing rings every 600 mm possible – each side equipped with 5 x 3 t UVV lashing rings, in the front and rear corners each 1 x 6.3 t lashing ring (front directly behind container locks in timber floor, rear in end crossmember), various 1.2 t lashing point options in front wall and end crossmember * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t / pair) suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed below loading bed in chassis * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air reservoirs, landing crank at front and flange towing eye painted black * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex works Egestorf at the A7

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering mechanism * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with in-cab display via EBS signal – no vehicle-side installation required * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, front right exterior on front wall * Side underride guard Crsdpsl Thvxefx Ad Ush * Plastic quarter mudguards * 50 mm softwood flooring * Provisions in front of front wall and rear for retrofitting 20" container locks * Bolted smooth sheet front wall * Side walls made of trapezoidal-profile steel sheet, foldable, split 1x in the middle * Steel rear wall, insertable between the ramps, storage bracket for non-use inside at the front wall * Bolted rear stakes * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing eyes possible every 600 mm – 4 lashing rings each side installed * In each corner (front and rear) 1 x 6.3 t lashing ring * Various bores in front and end crossmember for 1.2 t lashing points * One-piece mechanical grating-type loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear drive-on slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side wall paint color freely selectable up to approx. 2 weeks before production date, metallic and special colors excluded * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available immediately Egestorf

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2024, * PT 30 Profile: * EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function as well as RtR valve * Smart-Board mounted on trailer as information tool (separate axle load indication front and rear) * Tyre pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanised steel sheet skirts with spray protection * Contour marking tape, reflective on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment by means of draw spring & turnbuckle * Tool box, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side Cedpfx Aerwc R Hjd Ujrh * Accessory box in turntable with folding lid, 2 built-in container locks (immediately behind turntable platform) * ROBOT-welded anti-slip coating on turntable platform steel plate (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on front wall support, front & rear 1 pair UVV lashing rings (13.4 t) as well as 3 pairs each side UVV lashing rings (10 t), swivelling and lowerable, loadable in all directions and recessed in outer frame, each side 3 stanchion pockets with simultaneous 2 t lashing capacity * 6 pairs mechanical folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stored in the centre of the load area * Hydraulic one-piece ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shifting * Chassis, turntable, folding outriggers, drop supports and approach ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted in a shade of black * Loading edge height (laden): approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.950 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, * ETÜ-TA-ER 14.4 flatbed: * RDÜ (tire pressure monitoring system) * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t BPW axles * Air suspension with lifting and lowering system * Mechanically adjustable 3-meter warning sign panels front and rear * Height-adjustable drawbar with 40 mm flange towing eye (adjustable by approx. 300 mm) Csdpfx Ajv D Tbded Ujrh * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-measure of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left and right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (including bracket) at the rear * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container outer width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm, container locks extended = 2,819 mm (this dimension is not per DIN) at an absolute outer width of 3,000 mm * Perforated outer frame, approx. 45-degree edge, with 2 t lashing points every 480 mm; option to install 3 t recessed lashing rings every 600 mm; additionally, 5 x 3 t UVV lashing rings installed per side; one 6.3 t lashing ring in each front and rear corner (front directly behind container locks in wooden floor, rear in rear cross member); multiple holes provided in front and rear cross members for 1.2 t lashing points * 1 pair of aluminum slide-in ramps, approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment recessed into the chassis under the loading deck * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange towing eye painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Ready for immediate delivery from Egestorf on the A7

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.620 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9: * 5.5-meter platform, fully finished in RAL 9010 pure white * TPMS (Tire Pressure Monitoring System) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t Gigant axles * Parabolic suspension with tandem equalizer unit * 300 mm height-adjustable, hot-dip galvanized tow bar with 40 mm DIN towing eye * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding supports at the rear * Galvanized steel toolbox mounted on right-hand side * 15-pin electrical connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Plastic quarter mudguards * Lashing hooks along the sides and rear at the central locking mounts, plus 3 on the front wall * Hot-dip galvanized chassis * Steel platform body with 3-way tipper function * Continuous side walls, foldable, without central stanchions, with drop-side spring lift Credpfx Aem Angvod Ush * Rear flap foldable and swinging, operated by manual central locking system * Bolted, hot-dip galvanized rear corner posts * Each corner with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm steel floor plate * Mounting rail at the rear for loading ramps * Prepped for later installation of drop-side extensions * Reinforced superstructure with EN 12642 XL load securing certificate * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable compartment mounted under the load bed at the rear of the chassis * Axles, springs, air tanks, tow bar and landing gear painted in black * Platform body colour: RAL 9010 pure white * Painting of side walls and tipping body in a different RAL colour available at extra cost * Tyres: 235/75R17.5 * Wheelbase: 990 mm * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf at the A7

Stanje: novo, skupna masa: 40.000 kg, največja dovoljena obremenitev: 31.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest Csdpfxol Tnu Aj Ad Uerh * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.700 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (TPMS) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at rear * Pressure gauge for axle load determination (axle-specific on two air suspension circuits) * Side underrun protection * Swing-down supports at rear chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic fenders and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) toolbox lid on fifth-wheel platform * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 2 x 7-pin electrical sockets * Four stake pockets per side, each with simultaneous 2 t lashing capacity * Load securing package consists of: 2 lashing eyes (6.4 t) at front left & right on main frame of fifth-wheel platform, 5 pairs of UVV-certified lashing rings, swiveling and lowerable, loadable in all directions and recessed in outer frame – in corners 13.4 t, otherwise 10 t. * 6 pairs of mechanical folding outriggers for total width of 3 m (excluding rear slope) * Widening planks stowed in center of loading bed * Hydraulically operated, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable Crjdpfx Ajl Tq Eued Ujh * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm loading slope) * Chassis, turntable, drawbar, fold-out extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc., finished in black paint * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: novo, skupna masa: 19.000 kg, največja dovoljena obremenitev: 14.550 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension, drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at front * Rear external folding supports * Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted laterally on the right (black powder-coated) Cjdpfx Adopk D Nce Ujrh * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drilling rig transport on chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet, foldable with board-side wall spring assist * Steel rear wall can be slotted in between ramps – bracket for storage inside at front wall when not in use * Rear stanchions bolted * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner 1 x 10 t lashing ring, various holes in front and rear crossmembers for 1.2 t lashing points * One-piece mechanical grating loading ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (retractable up to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, rear panel, rear folding supports and loading ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 * Body side walls painted in RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 16.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer with pressure sensors for display of total axle load per axle group * Side underrun protection * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel panels, each with spray protection * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm (black powder-coated) mounted on right side * 15-pin power connector * LED lighting 12/24 V Codpfx Aetplv Ned Ujrh * LED revolving beacon (removable), rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (no installation required on the truck) * Rubber covering on the folding ramps as well as on the inclined ramp surface, left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from front to rear cross beam * Hardwood flooring on the walking surfaces of the low bed platform * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package comprising 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions, recessed into the outer frame – in corners 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear incline) * Plank holder under the cargo area, lengthwise * Roller stop in front of the front cross member, raised, with one 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic side ramp displacement * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof * Dual-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm ramped section) * Loaded platform height: approx. 890 mm +/- 20 mm with air suspension * Chassis, turntable, roller stop, folding extensions & ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.850 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline": * Floor and front wall hot-dip galvanized * EBS braking system Credpfx Ael Thymod Uoh * Emergency release device for spring brake cylinder * TPMS (Tire Pressure Monitoring System) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem leveling system * Drawbar adjustable in height by 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 rear mechanical hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, right side * 15-pin electrical connector * LED lighting * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the sides and rear in the central locking mounts, and 2 pieces on the front wall * Steel pallet 3-way tipper body (continuous sidewalls—no center stanchions—foldable with drop side spring assist) * Rear stanchions bolted * Combined steel wing doors at rear, 2-leaf, asymmetrically split, swiveling and lockable up to 270°, non-foldable; with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized rotary bar lock and central locking * Deactivation function for automatic rear flap when tipping backwards with open wing door * In each corner 1 x 5 t lashing point, plus 4 x 3 t lashing rings each side, recessed in the outer frame * 4 mm steel floor plate, mounting rail at rear for loading ramps * Body reinforced with load securing certificate per EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, recessed under the loading area in the chassis * Chassis, drawbar, front wall, tipper platform, rear stanchions, underride guard, mechanical drop supports hot-dip galvanized * Sidewalls and tailgate painted in RAL 9010 pure white * Sidewall painting in a RAL color tone available at additional cost * Axles, springs, flange towing eye, air tank and landing gear painted in black * New vehicle, no prior registration, with manufacturer warranty * Errors and prior sale excepted * Immediately available ex works Egestorf at the A7

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.780 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: * EBS, emergency release device for spring brake cylinders * TPMS tire pressure monitoring system * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizing mechanism * Height-adjustable drawbar, hot-dip galvanized, adjustable by approx. 300 mm, with 40 mm flange towing eye * Jost mechanical landing gear, front * 2 mechanical, hot-dip galvanized folding supports at the rear * Toolbox made of galvanized sheet steel, mounted right side * 15-pin electrical connector * Bolted underrun protection with LED tail lights * Quarter plastic mudguards * Net hooks on the sides and rear, integrated in the central locking brackets, plus 3 additional hooks on the front wall’s exterior * Hot-dip galvanized chassis * Steel 3-way tipper body, fully galvanized Credpfx Aopk D Dmsd Uoh * Continuous, drop-side panels without center stanchions, fold-down with board wall spring lift assist * Tailgate foldable and swinging open via manual central locking * Hot-dip galvanized bolted rear stanchion * Each corner features 1 x 5 t recessed and folding lashing ring; additionally, 4 x 3 t recessed and folding lashing rings fitted on the outer frame on each side * 4 mm steel floor, ramp mounting track at rear for approach ramps * Structure reinforced, includes EN 12642 XL load securing certificate * 1 pair of aluminum ramps approx. 3,570 x 400 mm (carrying capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, integrated under the loading area in the chassis * Tires: 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted black * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf, near the A7

Stanje: novo, skupna masa: 21.000 kg, največja dovoljena obremenitev: 16.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem compensating aggregate with 100 mm wide parabolic springs * Support windlass at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball coupling (offset by +77 mm / 33 mm adjustable via head plate) with elevated gantry for connection lines * 12 V 7 + 4 pole electrical wiring * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from towing vehicle without vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel Pal.- three-way tipper body with M-Strong side walls (fixed front wall, continuous side walls without central stanchions, swinging via manual central locking and mechanically foldable with side wall spring lifter * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * In each corner 1 x 7 t, and on each side 4 x 3 t recessed and foldable lashing rings * Hot-dip galvanized two-step access ladder in front of the front wall (left side) * 1 pair of aluminum ramps (10 t/pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 rear-integrated storage compartments for aluminum ramps in the chassis; load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * unloaded approx. 590 mm-- * Body paint finish in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection are hot-dip galvanized * Axles, air tanks, front support windlass * K80 coupling painted in a shade of black Credpfx Ader Dpz Ho Ush * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Drawbar height-adjustable by approx. 300 mm Codjrwc R Aspfx Ad Uorh * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * Front landing gear * Rear externally mounted folding support legs * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm, front right on bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted 400 mm smooth sheet bulkhead * Bolted rear stanchions * Drop sides with spring assist * Perforated outer frame, approx. 45 degrees folded with 2 t lashing capacity every 480 mm, installation of 3 t lashing rings every 600 mm possible; each front and rear corner equipped with 1 x 6.3 t lashing ring; multiple drilling points in front and end beam for 1.2 t lashing capacity * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump rates on truck over 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tank, front landing gear, and flange draw eye painted in a shade of black * Drop side paint finish in RAL 9010 pure white * Side walls available in other RAL colors for an additional charge * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 46 / 2025

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.870 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: * Loading platform: 6.27 m * Suitable for container transport * RDÜ tire pressure monitoring system * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t BPW axles * Parabolic leaf springs with compensating unit * Drawbar adjustable in height by 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Quarter mudguards made of plastic * LED lighting * Chassis, drawbar, front wall, rear wall, rear stanchions, and loading ramps are hot-dip galvanized * 50 mm softwood flooring * Pre-installed fittings for retrofitting container locks in front of the front wall * Bolted flat sheet front wall * Drop-down side walls made of trapezoidal-profiled steel with spring-assisted tailboard lifter * Steel rear wall can be inserted between the ramp brackets, stored inside in front of front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear crossmembers for 1.2 t lashing options Codpjq Ra D Njfx Ad Ujrh * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm thick) * Rear approach angle approx. 860 mm * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * Plastic toolbox * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.750 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring system * Brake system - EBS * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with balancing unit * Drawbar height-adjustable by approx. 300 mm – drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, front right exterior at the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Pre-fitted at front bulkhead and rear slope for optional retrofitting of container locks for 20" container transport * Bolted bulkhead made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet – center hinged, split in 1 section * Steel rear wall, can be stored between ramp brackets; when not in use, stowed inside at the bulkhead * Bolted rear stanchions * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings possible every 600 mm; in each front and rear corner 1 x 6.3 t lashing ring; various holes in the front and rear cross-members for 1.2 t lashing points * One-piece mechanical steel grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Rear approach slope, chassis approx. 860 mm * Drawbar, bulkhead, tailgate, drop-down supports and ramps hot-dip galvanized * --Axles, springs, air tanks, flanged towing eye and support winch painted in black -- Cjdpfsv D Tcbsx Ad Uorh * Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Wheelbase 1,140 * Side wall paintwork in RAL 9010 pure white * Side wall painting in an RAL color of your choice available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 47/2025

Stanje: novo, konfiguracija osi: 2 osi, skupna masa: 21.000 kg, največja dovoljena obremenitev: 16.500 kg, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, * KA-TA-R 21.0: * Chassis painted black (not galvanized) * Two-axle tandem agricultural trailer * Steel three-way tipper body with Bordmatic system * EBS (electronic braking system with RSS) * TPMS tire pressure monitoring system * Emergency release device for spring-actuated brake cylinders * Drum brakes * Gigant axles * Air suspension with ride height control during tipping * Traction assist for shunting, active on the first axle (controlled via EBS) * Front landing gear Csdpfx Aov D Tb Rjd Usrh * EBS multi-voltage system for towing vehicles with 12V & 24V electrics * 13-pin 12V power connector * Drawbar with K80 ball coupling (adjustable, coupling height approx. 440 - 550 mm when loaded), equipped with raised gallows for connection lines * Bolted steel underrun protection * Plastic quarter mudguards in front of the first and behind the last axle * Chassis constructed from high-strength fine-grained steel * Steel three-way tipper superstructure, fixed front wall, continuous side walls without intermediate posts, right side wall swinging and foldable with central locking and drop side spring lift, left side wall foldable with hydraulic drop side, tailgate swinging via automatic hook locking * 5 mm HARDOX 450 steel floor plate or equivalent * Four 3-ton UVV lashing rings per side recessed into the outer frame * Support load: 3 tons * Tyres: 600/55/R22.5 * New vehicle with manufacturer warranty * Subject to errors and prior sale * Delivery time upon request

Stanje: novo, konfiguracija osi: 2 osi, skupna masa: 14.400 kg, največja dovoljena obremenitev: 12.080 kg, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizer assembly * Height-adjustable drawbar (+/- 150 mm) with 40 mm bolt-type towing eye * Jost landing gear at the front, side underrun protection * Foldable A-panel at rear * 15-pin electrical connector, multi-chamber tail lights * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding wear plate 750 x 1,000 mm in the front area including 2 removable bin stops, each can be fixed in 2 positions * 4 repositionable bin stops, can be fixed in 2 positions for sideways centering of bins * On each side 1 x (13.5 t) UVV lashing point for attaching tensioning elements * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick shortener (tension force 6,300 kg) * Rear cross member suitable for positioning aluminum ramps including 2 additional rear support legs * Loading height (unladen): approx. 710 mm * Chassis, front wall, side walls, mudguards, drawbar, rear support legs hot-dip galvanized * Axles, springs, landing gear, air tanks painted in black * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading height (unladen): approx. 710 mm, sale without container * Color: hot-dip galvanized * Vehicle has a day registration from 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf, near the A7 Cjdpfxol Th Dme Ad Usrh

Stanje: novo, skupna masa: 21.000 kg, največja dovoljena obremenitev: 16.750 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinder * Drum brakes * 2 x 11 ton Gigant axles * Air suspension with lifting and lowering device * Preparation for retrofitting container locks in front of the bulkhead and rear slope, for the transport of 20” containers * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, right-hand side * Side underrun protection * Plastic quarter mudguards Cedpfoq Dyu Uox Ad Usrh * 15-pin power connector * LED lights * 21 ton GVW version with reinforced chassis and reinforced axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor in clamped design * Preparation for retrofitting container locks in front of the bulkhead * Bolted bulkhead made of flat sheet * Split side walls made of steel sheet – trapezoidal profile – foldable with folding stanchion in the center * Steel rear wall, retractable between the ramps – bracket for storage in front of the bulkhead when not in use * Rear stanchions bolted * Perforated outer frame approx. 45° angled with 2 ton lashing capacity every 480 mm * Installation of 3 ton lashing rings possible every 600 mm * 1 x 10 ton lashing ring in each corner, front and rear * Lashing package: each side with 2 x 8 ton retractable lashing rings in the outer frame, various holes in the bulkhead and end member for 1.2 ton lashing possibility * One-piece mechanical grating drive-on ramps with spring system for single-person operation approx. 3,000 x 620 mm (can be slid together up to 20 mm) * Rear chassis approach angle approx. 860 mm * Drawbar, bulkhead, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Unladen loading height approx. 940 mm * Laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side panel paint color can be chosen freely up to approx. 2 weeks before production date (no metallic or special colors) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, skupna masa: 19.000 kg, največja dovoljena obremenitev: 14.200 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2023, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Lateral underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lighting * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor, clamped version * Pre-fitted for subsequent installation of container locks in front of bulkhead * Bolted bulkhead made from smooth steel sheet * Split side walls made from trapezoidal-profile steel, fold-down with central folding stanchion * Sliding steel tailgate between ramps – storage bracket in front of bulkhead when not in use * Bolted rear stanchions * Perforated exterior frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * Load securing package: 1 x 10 t certified lashing point in each front and rear corner, 2 x 8 t certified retractable lashing points per side, various 1.2 t lashing points in front and end crossmember * One-piece mechanical grid ramps with spring assist for single-person operation, approx. 3,000 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, air tanks, flanged towing eye, and landing gear painted in black * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 Cedpfxol Tp Alo Ad Uerh * Sideboard painted RAL 9010 pure white * Side wall painting in any RAL colour shade available at extra cost * Vehicle has temporary (day) registration (not in use) * Subject to errors and prior sale. * Immediately available ex works Egestorf, A7.

Stanje: novo, skupna masa: 19.000 kg, največja dovoljena obremenitev: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ Tire Pressure Monitoring System * Emergency release for spring brake cylinders * Drum brakes * 2 x 11 ton Gigant axles Crjdpfx Adsmi Tcqe Ush * Air suspension with lifting and lowering system * Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * Folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped design * Fittings in front of bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Split steel side walls, trapezoidal profile, drop-down with central folding stanchion * Steel rear panel, can be slid in between the ramps; storage for unused panel on the inside front wall * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Load securing package: 1 x 10 t UVV lashing ring in each corner front and rear, 2 x 8 t UVV retractable lashing rings per side recessed in outer frame, various holes for 1.2 t lashing points in front and end crossmembers * One-piece slide-in ramps approx. 2,750 x 620 mm * Rear ramp angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, support legs and loading ramps hot-dip galvanized * --- Axles, air tanks, flange eye, and landing gear painted in black tone --- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem leveling aggregate * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, front right side of chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks at the central lock mountings and 2 pieces at the bulkhead * Chassis made of fine-grain steel * Steel platform – 3-way tipper body with reinforced Strong sidewalls (continuous upper sidewalls with internal tube reinforcement, no central stanchions, foldable sidewalls with drop side spring lifters) * Removable rear stanchions (bolted) * Combination steel double-leaf rear swing doors – asymmetrically split – 270° swing and lockable (not foldable), with additional pendulum frame for automatic rear door opening during tipping, locking via galvanized rotary latch at the rear and central locking system. Deactivation function for automatic rear door operation when tipping backwards with open swing doors. * In each corner: 1 x 5 t lashing ring; on each side: 4 x 3 t lashing rings sunk in the outer frame * 4 mm fine-grain steel floor plate * Rear mounting rail for ramps * Reinforced body with load securing certificate Cedpjl Thwysfx Ad Usrh * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis, integrated ramp storage * Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted black * Tires: 285/70 R19.5 * Sideboard paint RAL 9010 pure white * Sidewall paint in any RAL color possible for additional charge * Vehicle has a day registration (unused) * Subject to errors and prior sale * Available immediately from Egestorf