Prikolica z nizko platformo

MÜLLER-MITTELTAL T3 Tiefl., Luft., Schwarzdeckentransporte

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profile 30.0: * EBS-E (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lift/lower system * SmartBoard as trailer infotool with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panels front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Folding (hot-dip galvanized) lid for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) mounted right side * 15-pin electrical connector * LED lighting 12/24 V Nsdpfx Ageq Dyvcsyocp * LED beacon (removable) at rear * Side marker lights with indicator function * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Rubber lining on folding ramps as well as on the access slope, left and right (approx. 860 mm long) * Rubber lining on the longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-bed platform * Each side with 4 stake pockets, with simultaneous 2-ton lashing capacity * Load securing package consists of: 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame—in the corners 13.4 tons, elsewhere 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not possible in rear slope) * Board holder under the loading area, lengthwise * Roller stop raised in front of front crossmember with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump flow in truck over 40 to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulics * Platform over kingpin: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm access slope) * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding width extensions & loading ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted black * Loaded height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20 of 2026

Stanje: rabljeno, lastna masa: 4.020 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2017, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 11 m³, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Barva RAL 6002 bledo zelena Bobnasta zavora EBS Nosilnost 14.980 kg Zračno dvižno vzmetenje Dno 4 mm - stena 4 mm BPW osi Fiksna podvozna zaščita Nodexdk Anopfx Agyocp 5 parov pritrditvenih obročev Stranske aluminijaste stranice, nihajne in zložljive z dvižnimi vzmetmi Električna drsna ponjava Schwarzmüller Pridržujemo si pravico do napak

Stanje: novo, lastna masa: 4.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.880 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Frame Central axle welded steel frame construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; pin locking system for the tipper body with cross-over safety. Drawbar Cranked drawbar with height-adjustable heavy-duty bolted towing eye 50 mm (approx. 110 mm adjustment). Support equipment Front: 1 mechanical landing leg with crank, on the left in the direction of travel; 1 access step bolted on. Axles SAF Intradrum axles with drum brakes, S-cam brake 420/180 mm, load capacity 9 t/axle, reinforced axle bodies, off-road version, automatic brake slack adjusters. No axle lift. Braking system / Suspension Braking system according to ECE regulation R13 Two-line compressed air brake system Braking system by Knorr Nedpowc Tbmsfx Agyocp EBS system 2S2M, 2nd axle sensed RSS/RSP stability control system Spring-loaded parking brake on 2nd axle Aluminum air tanks Brake/air connection lines with two single coupling heads (yellow/red) EBS/ABS connection cable Hose lines installed under the drawbar Electronic air suspension with automatic lowering via inductive switch and additional lowering lock via rotary switch on the trailer No lift and lowering device Assistance/Safety Systems SWIT – Schwarzmüller Intelligent Telematics, “LOCAL TRAC” package Tipper body Steel welded construction Fixed steel front wall, 4 mm, approx. 980 mm high 2 access steps inside and 1 outside on the front wall Wear-resistant fine-grained steel floor plate 5 mm (Slight floor waviness due to welding distortion possible) 5 pairs of high-lift lashing rings, 5 t (distance between lashing rings approx. 2,320 mm) One-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, folding with extended pivot catches and spring-lift assistance, additionally pendular Manual central locking for side walls left and right 2 rear corner posts at side wall height, fixed to the side Steel tailgate 4 mm (HB400), approx. 980 mm high, pendular with recessed mountings, hooks for dosing chains on rear wall and underside of body Tailgate locking = automatic pneumatic lock With sealing strips Hydraulics Single-line system with hydraulic connection hose incl. quick coupling SVK DN13 Tipper cylinder for 3-way tipping, starting lifting force approx. 30 t; 1 safety cable Tarp Plastic rolling tarp incl. aluminum tube and hand crank, side overhang approx. 400 mm, without customs closure, horizontal rope lacing on the right in direction of travel, zig-zag lacing front and rear; bracket and catch for rolled tarp on the right; hand crank holder Tarp fastening on the left in direction of travel with 2 tension belts with rubber pads and tension locks on the underside of the body Tarp color similar to RAL 9006 White Aluminum Paintwork Steel grit cleaning, epoxy zinc phosphate primer (multi-layer) and spray coating with 2-component polyurethane top coat Chassis = RAL 7021 Black Grey Tipper body including front wall = RAL 7021 Black Grey Side walls = RAL 7001 Silver Grey Rear corner posts = RAL 7021 Black Grey Tailgate = RAL 7021 Black Grey Wheel hubs black = powder-coated Support legs black = powder-coated Side underrun protection = factory selection Plastic parts black, unpainted Powder-coated add-on components black Hot-dip galvanized add-on components unpainted Errors excepted.

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Ncodpfxen Aw Hks Agyop Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: novo, moč: 294 kW (399,73 KM), vrsta goriva: dizel, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x6, medosna razdalja: 20.240 mm, gorivo: dizel, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: euro2, vzmetenje: jeklo, Oprema: klimatska naprava, = Further options and equipment = - Leaf suspension = Notes = Model year: 2024 = Company information = Van Vliet Automotive Trading - Your Truck Partner A wide range of new trucks, trailers, 4x4 vehicles, and machinery. Immediately available! Our in-house (production) workshops, modification center, and paint shop ensure fast and project-specific processing of your order, anywhere in the world. ISO and AEO certified. Logistic handling and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers providing on-site technical support and training globally. Contact our experienced, multilingual customer service team now for professional, project-specific, and competitive consultation. = Further information = Transmission: TipMatic 12.28OD, automatic Model year: 2024 Tire size: 315/80R22.5 Suspension: leaf suspension Nedpfovpqcisx Agyscp = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported by extensive after-sales services, including spare parts supply and (local) training programs. WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings.

Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis - Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring, storage box integrated into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflaps Extendable extensions to 3,000 mm (not at the rear bevel) (Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for extension to 3,000 mm Low-bed lashing rings 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame 1 x by the neck area The remaining points are distributed at no more than 1200 mm intervals 1 x at the rear bevel 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) Drawbar Turntable Trailer Coupling Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical Axle load equalisation (rocker balancing) Brake System 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake included 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles ensuring the proper function of ABS! Wheels and Tyres 235/75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver finish Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate Rear bevel with 70 mm softwood flooring Ncedpfx Agoi Riy Esysp Low-bed area incl. rear bevel 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered, included With spring assist Operating Notes An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed! The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EU-FGV) 24/7 service hotline Prepared for double-line license plate holder Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear Paintwork Frame DB 7350 Novagrau 10-year guarantee against rust-through Drawbar galvanized or black, manufacturer's choice Access ramps hot-dip galvanized Note: Archive images!

Stanje: rabljeno, prevoženi kilometri: 392.370 km, moč: 427 kW (580,56 KM), prva registracija: 03/2017, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 04/2026, barva: siv, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 3.800 mm, prostornina tovornega prostora: 12 m³, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 2.390 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, Meiller three-way tipper body, Bordmatik sideboard mechanisms, hydraulic connection for trailer, Duo-Matic brake coupling, stainless steel toolbox, emergency brake assist, lane departure warning system, adaptive cruise control, traction control, hill start assist, ABS, differential locks, engine brake, air conditioning, auxiliary heater, navigation system, heated and electrically adjustable exterior mirrors, electric window lifts for driver and passenger doors, electrically operated glass sunroof, refrigerator box, multifunction steering wheel, cruise control, driver’s comfort suspension seat, leather seats, single sleeper berth, fog lights, rotating beacon, air horns on cab roof, leaf spring suspension. The vehicle may be fitted with advertising stickers and/or decals. Ref. no.: SI86563 Our offer is generally without a renewed technical inspection (TÜV). If you require a new TÜV inspection, we would be pleased to provide you with an offer from our partner workshops! The vehicle may be fitted with advertising stickers and/or decals. Our general terms and conditions of delivery and payment apply. We are happy to offer you a financing or leasing solution for this item. Nedox Tx Aqjpfx Agyjcp Feel free to contact us!

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings Ncodpfxoq Dyv Ij Agysp * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026