Müller-Mitteltal Nizki Nakladalnik nakup rabljenega (241)

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, Leto izdelave: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extra Features Djdpsxcxmfsfx Af Ejcn Equipment: - 2 spring-assisted lifts for 400mm high steel side walls - Reinforced and certified superstructure according to EN 12642 XL load securing certificate - 10 UVV lashing hoops in the existing perforated pattern in the outer frame - Additional clamped wooden floor - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg load capacity Paintwork: - Wheels: silver - Chassis / front wall / drawbar / rear wall / stakes / ramps: hot-dip galvanized - Axles / springs: black - Side walls: RAL2011 deep orange We will be happy to offer you suitable financing, hire purchase, or leasing solutions. Delivery or shipping available by arrangement. We always have a selection of new equipment in stock and demo units available. Feel free to contact us! We rent vehicles with or without drivers, as well as machinery. A wide range of used machines and equipment always available. Subject to technical modifications, errors, and prior sale.

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.860 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prva registracija: 07/2022, Oprema: ABS, ? pocinkano podvozje ? nizko sklopljen ? vlečno oko 50 mm ? zaklep za kontejner ? po 12 pritrdilnih obročev na vsaki strani ? vzvratna kamera ? bobnaste zavore ? duomatski priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojna kolesa Dedpfx Afjxb Ig Sj Eecn ? BPW osi Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign boards at front and rear * Front: enclosed plastic fenders / Rear: straight, galvanized steel sheet skirts, each with spray protection * Side and rear contour marking tape, reflective * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle Dcodpfxjq Dyv Ij Af Een * Four stake pockets per side (stakes not included), also suitable as lashing points * Cargo securing package with: 2 lashing eyes (6.4 tons) front left & right on the main frame of the turntable platform * 5 pairs of UVV swing-down and retractable lashing rings * Loadable in all directions and recessed into the outer frame: 13.4 tons in the corners, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (except in the rear slope) * Widening planks stored in a compartment under the loading area * Excavator arm rest above rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on the side of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck pump outputs over 40 liters up to max. 140 liters/min), dual-circuit hydraulic system * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm via compensating unit * Chassis, turntable, folding outriggers, rear drop-down supports and drive-up ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 03/2026

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 900 mm, prva registracija: 07/2010, skupna širina: 2.550 mm, Skupna teža: 18.000 kg Lastna teža: 4.500 kg Nosilnost: 13.500 kg Skupna dolžina: 10.200 mm Dedpfx Afsxbwico Eocn Nakladalna dolžina: 8.200 mm Širina: skupna širina 2.550 mm / nakladalna širina 2.450 mm Višina nalaganja: ca. 900 mm Dodatne informacije - Škatla za orodje - Zadnji naklon - Sprednja snemljiva stena - Rešetkaste rampe 2.650 mm - BPW osi - Obročki za pritrditev težkega tovora 11 parov - 400 mm Kinnegrip preklopne stranice - Dvojna kolesa - Zračno vzmetenje - Zadnja podpora - Hitrospustni ventil - Vlečna oko 50 mm

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, dolžina tovornega prostora: 4.990 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 870 mm, prva registracija: 11/1999, Oprema: ABS, 3-stranski kiper nadgradnja, jeklene stranice 880 mm, nastavljiva vlečna oj, vlečni obroč 50 mm, Jost podporna noga, ABS, BPW Eco os(i), bobnaste zavore, zračno vzmetenje, vzvratne luči, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Dcjdpfxsw Ndqqo Af Ejn Naša ponudba je načeloma brez nove TÜV tehnične pregleda. Če želite nov TÜV pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila. Za to vozilo vam z veseljem pripravimo ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas!

Stanje: novo, skupna masa: 19.000 kg, največja dovoljena obremenitev: 14.750 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2025, Oprema: ABS, * Müller Mitteltal KaTaR 19 tandem three-way tipper trailer with aluminium drop sides and roll tarp * NEW VEHICLE, never registered * Available from December 2025 Reference number for inquiries: 24990 * Also available to order in your desired RAL colour and with customised equipment * Please request a quote from us! * Gross vehicle weight: 19t, payload: 14.75t * EBS with RSS (roll stability support) * Body: continuous asymmetrical aluminium side walls, 900mm high * Front and rear wall: 900mm high, made of steel * Body dimensions: 4,995mm x 2,380mm x 900mm, finished in RAL 9016 traffic white * 2 spring-assisted side wall lifters * 4 pairs of lashing rings recessed and foldable in 5mm steel floor, LC 3000 daN each * 1t support load, with accordingly increased payload * BPW Eco axles, air suspension, drum brakes, tyres: 385/65R 22.5 * Folding underrun protection for paver loading, galvanised * Adjustable drawbar with 50mm towing eye, offset +77mm/+33mm Djdpowr Sbqefx Af Escn * Front support leg with crank handle * 2 LED reversing lights * Front wall platform made of grating with access step and grab handles on the front wall * Roll tarp, fixed installation right in direction of travel, tarpaulin removable (for folding down the right side wall remove the tarpaulin), agate grey ---- * Financing available via our partners FM LeasingPartner or MMV Leasing for terms from 24 to 72 months, with or without down payment, with or without residual value. * Please request a quote! * Leasing, hire purchase, financing, trade-in possible ----* Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours available by appointment * We speak German, English, Russian, Polish, French * Leasing, financing, trade-in available

Stanje: rabljeno, skupna masa: 33.500 kg, največja dovoljena obremenitev: 25.800 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, prva registracija: 07/2011, Leto izdelave: 2011, Oprema: ABS, Condition: very good, drum 75% Djdpou Ear Asfx Af Ejcn Tyres: 70%

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.860 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prva registracija: 07/2022, Oprema: ABS, ? pocinkano ogrodje ? nizko spojeno ? vlečno uho 50 mm ? zaklep zabojnika ? po 12 priveznih obročkov na stran ? vzvratna kamera ? bobnaste zavore ? Duomatic priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojne pnevmatike ? BPW osi Vsi podatki brez garancije / vmesna prodaja pridržana. Dcjdpfx Ajxb Iglef Een

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning panels at the front & rear * Front closed plastic mudguards and rear straight galvanized steel fenders, each with splash guards Dodpstplwfjfx Af Eocn * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Four side stake pockets each (no stakes supplied), also usable as lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant lashing rings, swivelable and lowerable * Loadable in all directions and recessed into the outer frame corners: 13.4 t, elsewhere 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening planks stored in a compartment under the loading platform * Digger arm rest from rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing rings fitted to the side of the digger arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable ramp shift (sideways) * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to max. 140 l/min), dual-line hydraulics * Platform over turntable: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 860 mm +/- 30 mm with compensation unit * Chassis, turntable, folding outriggers, rear drop supports and drive-on ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc. painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 03/2026

Stanje: rabljeno, skupna masa: 8.600 kg, lastna masa: 2.650 kg, največja dovoljena obremenitev: 5.950 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.520 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 500 mm, prva registracija: 05/1996, barva: modra, številka stroja/vozila: 3795,

Stanje: rabljeno, lastna masa: 3.370 kg, največja dovoljena obremenitev: 8.630 kg, obratovalna teža: 12.000 kg, prva registracija: 10/2011, naslednji pregled (TÜV): 06/2024, vzmetenje: zrak/zrak, velikost pnevmatike: 235 / 75 R17.5 / 10mm, skupna dolžina: 9.600 mm, skupna širina: 25.500 mm, skupna višina: 10.500 mm, velikost sprednje pnevmatike: 235 / 75 R17.5 / 10mm,

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 11.050 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-Loader Three-Way Tipper Trailer with Ramps – NEW VEHICLE * Available mid-September 2025 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Enquiry no. 24906 * Brake wear indicator with display capability in the truck via EBS signal * Side marker lights with indicator control * Gross weight: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanised floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, folding, and removable, prepared for later retrofitting of side extension boards * Lockable compartment under tilt bridge for access ramp * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis galvanised, front wall galvanised * 4 UVV lashing rings LC 5000daN at the front and rear + 8 recessed and folding lashing eyes LC 3000daN centred in the tipper bed * Hardwood excavator bucket rest * 2-step access in front of the front wall (galvanised) * Continuously height-adjustable drawbar, galvanised, 40 mm towing eye * Wide tyres 385/55R 19.5 (quadruple), parabolic springs * Net hooks, bolted rear posts, galvanised * Tension cables for the rear drop side * Plastic toolbox mounted on the right side of the chassis frame * LED lighting system 12 + 24 volt * 2 LED reversing lights at the rear of the trailer * Hire-purchase price: * e.g. €550 for 60 months with no down payment, no final residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request an offer from us! * We are Müller-Mitteltal authorised distributor ---- Our business hours Monday – Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside of business hours, we are available by appointment We speak German, English, Polish, French. Dcjdpfx Afjwvx Tbe Ejn Whatsapp / Facetime

Stanje: rabljeno, skupna masa: 11.900 kg, lastna masa: 3.190 kg, največja dovoljena obremenitev: 8.710 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 350 mm, prva registracija: 01/2018, vzmetenje: jeklo, barva: rdeča, vrsta prenosa: mehanski, skupna dolžina: 8.433 mm, Oprema: ABS, Dolžina rampe 2700, širina 600, osi Gigant, vzmetni akumulator, bobnaste zavore, ABS, Duomatik, 15-polni. Nezavezujoča ponudba – spremembe in vmesna prodaja pridržane – prodaja brez kakršnekoli garancije – vse informacije brez jamstva! Dedsw Nrg Hjpfx Af Eocn

Stanje: rabljeno, skupna masa: 40.000 kg, največja dovoljena obremenitev: 31.600 kg, konfiguracija osi: 3 osi, prva registracija: 12/2001, Oprema: ABS, Vehicle identification number: WMM0000010046004 Unladen weight: 8,400 kg German roadworthiness inspection (HU): due BPW Eco axles with drum brakes Leaf spring suspension Upper deck length: 2,500 mm – loading height: 1,070 mm Lower deck length: 7,200 mm – loading height: 885 mm Dcjdpfx Afewwd R Is Esn Drawbar – 50 mm Hydraulic ramps, split – length 2,000 + 1,300 mm – width 660 mm Support legs Tyres: 235/75 R 17.5 Modifications, prior sale, and errors excepted. The description serves for general vehicle identification and does not constitute a warranty in the legal sense. The contractual description as per the purchase agreement is legally binding. Our offers generally do not include a new technical inspection (TÜV certificate). If a new TÜV certificate is required, we will be pleased to provide an offer from our partner workshops. Vehicle may feature advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: Dodpfxsv Dz N Aj Af Escn * Floor and front wall hot-dip galvanized * Wabco EBS * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring system * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem balancing unit * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye * Jost mechanical landing gear at the front * Two rear mechanical, hot-dip galvanized folding supports * Toolbox made of galvanized sheet steel, right side * 15-pin power connector * Bolted underrun protection * LED lighting * Plastic quarter mudguards * Net hooks on the sides and rear in the central locking brackets as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls, foldable without central stanchion, with drop-side spring lifts * Rear tailgate foldable and swinging, operated via manual central locking * Hot-dip galvanized, bolted rear stanchion * 1 x 5 t recessed, foldable lashing ring in each corner and 4 x 3 t recessed, foldable lashing rings on each side in the outer frame * 4 mm steel floor * Rear guide rail for loading ramps * Body reinforced with EN 12642 XL load securing certificate * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment beneath the loading platform, integrated into the chassis at the rear * Tires: 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted in black * Drop-side painted in RAL 9010 pure white * Painting of side walls in a custom RAL color available at extra charge * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 49/2025

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 11.050 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - Truck Tandem Three-Side Tipper - Payload (standard) approx.: 11,050 kg - Increased total weight up to 14.4 t with 285/70R19.5 tires Dodpewcy Nkefx Af Ejcn - Internal dimensions: 5,000 x 2,420 x 500 mm - Loaded floor height: 1,040 mm - 1 chassis with underrun protection, hot-dip galvanized version - Paint finish: axles with springs as well as air tanks etc. in black tone - 3 pairs of recessed and foldable lashing hooks in the steel floor, LC 3,000 daN - ABS 2S/2M, 24 Volt - 2 spring-assistors for 500 mm high steel sideboards - 1 central locking system left and right, swinging when side walls are not split Additional Equipment: 1 pair of UVV lashing rings recessed in steel floor instead of on the steel floor 1 Hardox 450 steel floor, 4 mm thick Height-adjustable drawbar via bevel gear with crank operation instead of standard 1 pair of aluminium ramps without curb (8.0 t/pair), 3,570 x 400 x 105 mm Suitable for rubber-tired and tracked vehicles Toolbox

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 14.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, prva registracija: 02/2010, naslednji pregled (TÜV): 05/2025, Leto izdelave: 2010, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Oprema: ABS, MÜLLER MITTELTAL RA18 Trailer for Swap Containers with External Rollers 5,500 mm – 7,000 mm, German trailer, second owner Technical Data Suitable for containers with external rollers, internal length 5,500–7,000 mm, for rear loading. Dimensions: - Gross weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread Features: - ABS/EBS connection according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer rails for container guidance, hot-dip galvanized - Container locking: The roll-off container is secured at 4 points by 2 pneumatic clamping units. After sliding on the container, the 4 securing claws are closed by activating a valve, clamping the container to the chassis frame. To the front, the container is additionally secured by 2 insertable lock parts (with holders), which can be positioned at various points along the guide rails. - 2x 9t BPW 420 mm drum brake axles with air suspension - Air suspension with lowering function - Frame: welded steel construction - Brake system: two-line EBS-compliant (EU standard) - DUOMATIC coupling head Dedpfx Afsvg T Nye Eocn - Spring-loaded parking brake - Electrics: 24 volts - Multi-chamber rear lights - 15-pin plug with connecting cable - Lighting according to EU regulations - Rims: factory silver - Underrun protection: aluminum profiles - Wheel chocks with holders - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Delivery available at extra cost All information subject to change! Sale to businesses or for export only! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: novo, skupna masa: 21.000 kg, največja dovoljena obremenitev: 16.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low-loader / Platform Trailer, drive-over version Ref. for enquiries – 11520, available immediately! NEW VEHICLE incl. COC * GVW: 21t, Payload: 16.60t, hot-dip galvanized chassis * Platform version with 400 mm front wall, ramp securing by ramp holding rod and diagonal bracing * 21 t GVW version: reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000 mm loading area with 400 mm high front wall * Ramps extended: 3,000 mm, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy one-person operation * Load securing package: 4 UVV drop-forged lashing brackets (LC 8,000 daN) mounted to existing hole pattern on 45° outer frame (protruding approx. 5 mm). Arrangement: approx. 1,000 mm from front/rear cross member. * 10 UVV retractable lashing brackets LC 3,000 daN in the outer frame’s hole grid * Softwood flooring, 50 mm. 2 UVV recessed lashing rings front + rear in the cross member, LC 10,000 daN each * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in front and rear cross members * Prepared for retrofitting container locks * Air suspension, Gigant axles incl. EBS 2S/2M * Raise and lower function * 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, right in the direction of travel * LED lighting system * 7-pin socket at the rear, wired for oversize lighting incl. rear light (58R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Warning sign for oversize loads * 1 removable LED beacon incl. bracket and installation * Folding supports at rear, landing leg at front with gearing crank ---- Lease-purchase example from our partner MMV Leasing: €635/month net, 60 months term, no down payment, €0 residual value Dsdjwkb Iwopfx Af Eocn Other terms possible with/without down payment or residual value! We are a MüllerMitteltal authorised dealer ---- Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of business hours by appointment * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * Leasing, financing, trade-in possible

Stanje: rabljeno, skupna masa: 13.500 kg, največja dovoljena obremenitev: 10.100 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 1.000 mm, prva registracija: 03/2001, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Skupna teža: 13.500 kg Lastna teža: 3.400 kg Djdpfxsw Nu I Te Af Eecn Nosilnost: 10.100 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: 6.000 mm Širina: skupna širina 2.550 mm / širina kesona 2.460 mm Višina nakladanja: ca. 1.000 mm Dodatne informacije - Pnevmatske gume: 285/70R19,5 - Stranske stene 400 mm, 1x deljene

Stanje: rabljeno, skupna masa: 6.500 kg, največja dovoljena obremenitev: 4.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, Leto izdelave: 1979, skupna širina: 2.500 mm, skupna višina: 3.000 mm,

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.670 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: * Floor and front wall hot-dip galvanized * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinder * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem compensating unit * Height-adjustable hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical hot-dip galvanized folding supports * Toolbox made of galvanized sheet steel, right side * 15-pin power plug * Bolted underrun protection * LED lighting * Plastic quarter mudguards * Net hooks on the sides and rear in the central locking mounts, as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel platform body, three-way tipper * Continuous drop sides without center stanchion, folding down with drop side spring lifters * Tailgate folds down and can swing by manual central locking * Hot-dip galvanized bolted rear stanchion * 1 per corner: 5 t recessed and foldable lashing rings, plus 4 x 3 t lashing rings per side, recessed and foldable in the side frame * 4 mm steel plate floor * Rear ramp guides for drive-up ramps * Body reinforced, load securing certificate according to EN 12642 XL * 1 pair aluminum drive-up ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment underneath the loading platform, integrated into the chassis, accessible from the rear * Tyres 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black * Side boards painted RAL 9010 pure white * Side panels can be painted in an RAL color of your choice for an extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 49/2025 Dsdpfjq Hg Dxjx Af Eecn

Stanje: novo, skupna masa: 8.800 kg, največja dovoljena obremenitev: 6.000 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * NEW VEHICLE without initial registration * Available immediately, * Reference number for inquiries: 11555 * TPMS tire pressure monitoring * EBS braking system, drum brakes, BPW axle, parabolic springs * Support winch at the front, spring-assisted square support legs at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm towing eye (height-adjustable) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, closed steel mudguards * Swiveling cable drum frame * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * For drum diameter 800–3,000 mm x (1,700 mm width between drum arms) Dsdpfxew R H Syo Af Eecn * With locking device for drum securing at arm ends as well as locking of drum frame to chassis with a centrally positioned claw lock * Motor-hydraulically powered pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic connectors, hoses, and pipes in NW 13. * Hydraulic drum drive with oil motor, valves, and rubberized drive rollers (adjustable). Hydraulic speed controller and brake for drum drive. * Additionally, hydraulic pump unit with petrol engine and manual starter, 13 HP with gear pump (150 bar), pressure supply either by connecting to truck hydraulics or pump unit * Alternatively, diesel engine with 6.5 HP, 150 bar, instead of petrol engine * 2 LED work lights mounted on the sides of the trailer (suitable for 12 V and 24 V), can be switched from the truck (truck-side installation required, connected to PIN 11) * Tool box approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated in side protection, exterior finished in RAL 9016 traffic white (polyester coated) ---- * Financing available through our partners with or without down payment or final installment, and different terms possible. Request an offer from us! * We are an authorized Müller Mitteltal dealer! * Example installment purchase from our partner FM LeasingPartner: e.g., €865 per month net, no down payment, and "0" euro remaining value at 48-month term. * Request an offer from us! ---- * Our opening hours * Monday–Thursday: 08:00–17:00 * Friday: 08:00–15:00 * Outside business hours, we are available by appointment * wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais ----

Stanje: novo, skupna masa: 9.600 kg, največja dovoljena obremenitev: 6.900 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2025, * EBS (electronic braking system) * Emergency release device for spring brake cylinder * Drum brake * SAF axle * Parabolic springs * Drawbar designed as a central axle with 40 mm bolt eye * Continuously adjustable drawbar height using spindle lifting element instead of fixed drawbar * Standard coupling height approx. 900 mm (+/- 150 mm) * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Front landing gear * Enclosed plastic mudguards * Folding underrun protection for pavers * 15-pin electrical connector * LED rear lights * Flashing side marker lights * Chassis made of fine-grained steel * Pallet three-way tipper body * 700 mm steel front wall * Asymmetrical continuous aluminium side walls, folding without central stanchion, with extended travel locks and pendulum function via manual central locking * 800 mm high steel tailgate with automatic tailgate opening when tipping rearwards * 4 mm Hardox 450 steel floor * Two pairs per side of 3 t (ton) lashing rings, recessed and foldable in steel floor * Chassis, drawbar, underrun protection hot-dip galvanised * Tipper body paintwork available in any desired RAL colour (excluding metallic & special colours) up to 6 weeks prior to delivery * New vehicle with manufacturer's warranty * Errors and interim sales excepted Dcodpfx Afew Ndr Uj Esn * Available from calendar week 51/2025 * Sample images; actual vehicle may differ from the pictures

Stanje: novo, skupna masa: 40.000 kg, največja dovoljena obremenitev: 30.740 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard board for load weight determination * Warning panel package front & rear * Reflective contour tape on sides and rear * Rotating beacon (removable) at rear * LED light * Straight drawbar with 50 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet plus spare wheel holder in basket design, right-hand side * Front closed plastic single mudguards * Rear straight steel mudguards each with spray protection (splash suppression) * Side underride protection * Bogie platform extended by 520 mm at the front with 45° corners and 3 recessed storage compartments incl. lid, lockable * Chassis made of high-tensile fine-grained steel * Floor above bogie platform made of 50 mm, and on low-bed platform made of 60 mm softwood * Outer planks of the access ramps made of hardwood * 4 stake pockets each side (stakes not included) with simultaneous 2 t lashing option * Lashing package consisting of: 2 lashing eyes 6.4 t at front left and right on the main frame of the bogie platform * At the sides, front and rear, 2 pairs each 13.4 t lashing rings on the outer frame, and 4 pairs each side 10 t swiveling and lowering lashing rings * Loadable in all directions and recessed in outer frame * 2 pairs of 6.4 t lashing rings at the sides in the excavator arm rest * 8 pairs of galvanized folding supports for 3 m total width (not at the rear slope) * Widening planks stored in a compartment left side * Excavator arm rest above rear axle up to end of approach slope approx. 2,100 x 740 x 190 mm * Mechanical support legs rear * Hydraulic folding ramps with hydraulically extendable tapered section approx. 4,650 x 720 mm incl. hydraulic lateral ramp displacement & load holding valve Djdpfx Asl Tik Nsf Eocn * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loaded loading height: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, folding supports and mechanical support legs hot-dip galvanized * Axles, drawbar, air tank and slewing ring painted in a black tone * 235/75 R 17.5 tires * New vehicle without first registration with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, skupna masa: 40.000 kg, največja dovoljena obremenitev: 30.740 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smart-board for payload determination * Warning panel packages front & rear * Reflective contour tape on sides and rear * Detachable revolving beacon at rear * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder (basket type) on right side * Front: closed single poly mudguards * Rear: straight steel mudflaps with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lid and lockable * Chassis made from high-strength fine-grained steel * Decking over turntable platform: 50 mm coniferous wood, low-bed platform: 60 mm coniferous wood * Outer decking of ramps made from hardwood * Four stake pockets each side (stakes not included) with simultaneous 2 t lashing option * Load securing package: 2 lashing rings (6.4 t) front left & right on main frame of turntable platform * Each side front/rear: two pairs of 13.4 t lashing rings on outer frame; each side: four pairs 10 t swivel/drop lashing rings, loadable in all directions, recessed into outer frame * 2 pairs of 6.4 t lashing rings at excavator arm rest * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear slope) * Extension planks stored left side in storage compartment * Excavator arm recess above rear axles to end of ramp: approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically deployable ramp tip (approx. 4,650 x 720 mm), including hydraulic lateral ramp shift & load holding valve * Loading platform above turntable: approx. 2,990 x 2,520 mm * Rear loading platform: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach angle) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical support legs hot-dip galvanized Dcsdpfx Ael Tphref Ejn * Axles, drawbar, air tanks, and turntable painted black * Tyres: 235/75 R 17.5 * New vehicle without first registration, manufacturer warranty included * Subject to errors and prior sale * Immediately available ex works Egestorf