Prikolica z nizko platformoMÜLLER-MITTELTAL
3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
Prikolica z nizko platformo
MÜLLER-MITTELTAL
3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
Stalna cena brez DDV
46.900 €
(55.811 € bruto)
Leto izdelave
2024
Stanje
Novo
Lokacija
Egestorf 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Stalna cena brez DDV
46.900 €
(55.811 € bruto)
- Lokacija prodajalca:
- Eichenstich 12, 21272 Egestorf, Nemčija

Klic
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 23.700 kg
- Skupna masa:
- 30.000 kg
- Konfiguracija osi:
- 3 osi
Podrobnosti ponudbe
- ID ponudbe:
- A104-34-320
- Št. reference:
- 5902
- Nazadnje posodobljeno:
- dne 10.07.2025
Opis
* T3 Profi 30.0:
* Wabco EBS-E (electronic braking system)
* Tire pressure monitoring system (TPMS)
* Emergency release device for spring brake cylinders
Itodpol Tq Euofx Ab Uor
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with manual lowering at rear
* Pressure gauge for axle load determination (axle-specific on two air suspension circuits)
* Side underrun protection
* Swing-down supports at rear chassis frame
* Mechanically adjustable warning panel sets front and rear
* Front closed plastic fenders and rear straight galvanized steel skirts, each with splash guards
* Reflective contour tape on sides and rear
* Fold-down (hot-dip galvanized) toolbox lid on fifth-wheel platform
* LED tail lights
* Removable rotating beacon at rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 2 x 7-pin electrical sockets
* Four stake pockets per side, each with simultaneous 2 t lashing capacity
* Load securing package consists of: 2 lashing eyes (6.4 t) at front left & right on main frame of fifth-wheel platform, 5 pairs of UVV-certified lashing rings, swiveling and lowerable, loadable in all directions and recessed in outer frame – in corners 13.4 t, otherwise 10 t.
* 6 pairs of mechanical folding outriggers for total width of 3 m (excluding rear slope)
* Widening planks stowed in center of loading bed
* Hydraulically operated, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm loading slope)
* Chassis, turntable, drawbar, fold-out extensions & loading ramps hot-dip galvanized
* Axles, turntable, air tanks, etc., finished in black paint
* Tires: 235/75 R 17.5
* Payload approx. 24,000 kg at 30,000 kg gross weight
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Immediately available ex Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
* Wabco EBS-E (electronic braking system)
* Tire pressure monitoring system (TPMS)
* Emergency release device for spring brake cylinders
Itodpol Tq Euofx Ab Uor
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with manual lowering at rear
* Pressure gauge for axle load determination (axle-specific on two air suspension circuits)
* Side underrun protection
* Swing-down supports at rear chassis frame
* Mechanically adjustable warning panel sets front and rear
* Front closed plastic fenders and rear straight galvanized steel skirts, each with splash guards
* Reflective contour tape on sides and rear
* Fold-down (hot-dip galvanized) toolbox lid on fifth-wheel platform
* LED tail lights
* Removable rotating beacon at rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 2 x 7-pin electrical sockets
* Four stake pockets per side, each with simultaneous 2 t lashing capacity
* Load securing package consists of: 2 lashing eyes (6.4 t) at front left & right on main frame of fifth-wheel platform, 5 pairs of UVV-certified lashing rings, swiveling and lowerable, loadable in all directions and recessed in outer frame – in corners 13.4 t, otherwise 10 t.
* 6 pairs of mechanical folding outriggers for total width of 3 m (excluding rear slope)
* Widening planks stowed in center of loading bed
* Hydraulically operated, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm loading slope)
* Chassis, turntable, drawbar, fold-out extensions & loading ramps hot-dip galvanized
* Axles, turntable, air tanks, etc., finished in black paint
* Tires: 235/75 R 17.5
* Payload approx. 24,000 kg at 30,000 kg gross weight
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Immediately available ex Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
Pošlji zahtevo
Telefon & Faks
+49 40 33... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake





































