Prikolica z nizko platformoMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Prikolica z nizko platformo
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Fiksna cena plus DDV
29.900 €
(35.581 € bruto)
Leto izdelave
2025
Stanje
Novo
Lokacija
Egestorf 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Fiksna cena plus DDV
29.900 €
(35.581 € bruto)
- Lokacija prodajalca:
- Eichenstich 12, 21272 Egestorf, Nemčija

Pokliči
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 10.900 kg
- Skupna masa:
- 14.400 kg
- Konfiguracija osi:
- 2 osi
- Dolžina tovornega prostora:
- 6.270 mm
- Širina tovornega prostora:
- 2.470 mm
- Višina nakladalnega prostora:
- 400 mm
Podrobnosti ponudbe
- ID oglasa:
- A128-69-180
- Referenčna številka:
- 6158
- Posodobitev:
- nazadnje dne 19.02.2026
Opis
ETÜ-TA-R 14.4
----Braking System:
* EBS Electronic Braking System
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow Bar / Flange Towing Eye:
* Height-adjustable tow bar, adjustable by 300 mm
* Tow bar extension by 250 mm to a total of 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED rear lights 12 / 24 V
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right side of the headboard
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the headboard for retrofitting container locks
* Bolted headboard made of smooth sheet metal
* Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist
* Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard
* Bolt-on rear posts
* Rear approach angle approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing point in each front and rear corner
* Various holes in the front and rear cross member for 1.2 t lashing options
----Ramps:
Nksdpfx Abepk Dv Re Uew
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps
* Side wall color RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex works Egestorf
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
----Braking System:
* EBS Electronic Braking System
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow Bar / Flange Towing Eye:
* Height-adjustable tow bar, adjustable by 300 mm
* Tow bar extension by 250 mm to a total of 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED rear lights 12 / 24 V
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right side of the headboard
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the headboard for retrofitting container locks
* Bolted headboard made of smooth sheet metal
* Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist
* Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard
* Bolt-on rear posts
* Rear approach angle approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing point in each front and rear corner
* Various holes in the front and rear cross member for 1.2 t lashing options
----Ramps:
Nksdpfx Abepk Dv Re Uew
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps
* Side wall color RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex works Egestorf
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
180 Oglasi na spletu
Pošlji povpraševanje
Telefon & Faks
+49 40 33... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake
























































