Priklopnik z delovno ploščadjoMÜLLER-MITTELTAL
        14,4 to. Tieflader, luftgefed. mit Auffahrrampen    
 Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL
        14,4 to. Tieflader, luftgefed. mit Auffahrrampen    
                                                     Stalna cena brez DDV                                            
                                            29.900 €                                    
                        (35.581 € bruto)                    
                Leto izdelave            
                2025            
            Stanje        
            Novo                    
            Lokacija        
                                                Egestorf                                            

 Prikaži slike            
 Prikaži karto            
Osnovni podatki
Cena in lokacija
                             Stalna cena brez DDV                    
                            29.900 €                    
                (35.581 € bruto)            
- Lokacija:
 -             Eichenstich 12, 21272 Egestorf, DE                

 
 Klic            
Tehnične podrobnosti
- Največja dovoljena obremenitev:
 - 10.900 kg
 
- Skupna masa:
 - 14.400 kg
 
- Konfiguracija osi:
 - 2 osi
 
- Dolžina tovornega prostora:
 - 6.270 mm
 
- Širina tovornega prostora:
 - 2.470 mm
 
- Višina nakladalnega prostora:
 - 400 mm
 
Podrobnosti ponudbe
- ID ponudbe:
 - A144-06-196
 
- Št. reference:
 - 61581
 
- Nazadnje posodobljeno:
 - dne 25.06.2025
 
Opis
        * ETÜ-TA-R 14.4:
* TPMS (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension
* Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm
* Jost landing gear at the front
* LED rear lights
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right on the outside of the front wall
* Side underride protection
* Plastic quarter mudguards
* Hot-dip galvanized chassis, as well as drawbar, front wall, rear wall, tailgate, and loading ramps
* 50 mm softwood floor
Bjdpfx Asq Dyvyeh Eslp
* Fixture in front of the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal profile steel sheet, folding, with board spring lifter
* Steel rear wall, can be slid in between the ramps—storage bracket for rear wall in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm, option to fit 3 t recessed lashing rings every 600 mm; in each front and rear corner one 6.3 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm)
* Approach angle at rear approx. 860 mm
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* Side panel color RAL 9010 pure white
* Painting of the side walls in a RAL color shade available at an extra charge
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
* TPMS (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension
* Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm
* Jost landing gear at the front
* LED rear lights
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right on the outside of the front wall
* Side underride protection
* Plastic quarter mudguards
* Hot-dip galvanized chassis, as well as drawbar, front wall, rear wall, tailgate, and loading ramps
* 50 mm softwood floor
Bjdpfx Asq Dyvyeh Eslp
* Fixture in front of the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal profile steel sheet, folding, with board spring lifter
* Steel rear wall, can be slid in between the ramps—storage bracket for rear wall in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm, option to fit 3 t recessed lashing rings every 600 mm; in each front and rear corner one 6.3 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm)
* Approach angle at rear approx. 860 mm
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* Side panel color RAL 9010 pure white
* Painting of the side walls in a RAL color shade available at an extra charge
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
            Opomba:        Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.    
Registriran od: 2001
Pošlji zahtevo
Telefon & Faks
                            +49 40 33... oglasi                
 Ti oglasi bi vas prav tako lahko zanimali.
            Vaš oglas je bil uspešno izbrisan            
            Prišlo je do napake            

























































