Goldhofer 6-Achs-Tele-Semi Mit Hydr.rampen-Zwangs. nakup rabljenega (43.262)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Goldhofer6-Achs-Tele-Semi mit hydr.Rampen-zwangs.
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 75.700 kg, skupna masa: 93.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 885 mm, velikost pnevmatike: 245/70 R17.5, barva: bež, Leto izdelave: 2008, Gooseneck, rigid, in central beam design:
- Loading area: 3,700 mm x 2,480 mm
- Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at the end of the gooseneck)
- Closed outer frame
- Max. fifth wheel load: 26,000 kg
- Swing radius: 2,700 mm
- 2" kingpin
- Wooden floor
- Hydraulically operated landing legs
- One-piece aluminum drop sides, 400 mm high, closed on 3 sides including rear tailboard, stakes foldable and removable
- 2 pairs of lashing points LC 8,000 daN
Loading area:
- Single telescoping, continuous over chassis
- External/internal tube construction with 1,090 mm fixed loading platform section at front
- (L x W): 8,700 mm x 2,550 mm, extendable by 6,700 mm to max. 15,400 mm
- Steel floor covering
- Locking of extension stages via spring-loaded cylinders and conical bolts
- Vehicle optimized for maximum extension
- 7 pairs of lashing points LC 13,000 daN
- 6 pairs of lashing points LC 6,000 daN
Lhsdpexp U Tzofx Aibof
- 6 pairs of stake pockets 100 x 50 mm (LC 2,000 daN)
6-axle running gear:
- 1 rigid axle, 5 forced-steering axles
- Axle brand: SAF
- Chassis width: 2,550 mm
- 1st axle: load-dependent lift axle
- 2nd axle: manually liftable (not load-dependent)
- Wheelbase, starting from first axle: 1,310 mm
- Twin tires 245/70 R 17.5
- Air suspension, 200 mm lift
- Ride height: 885 mm +100 mm / -100 mm
- 2nd ride height: 845 mm +140 mm / -60 mm
- Floor covering: steel / wood
Vehicle rear:
- "Beveled" design (600 mm long, 10° bevel)
- 1,000 mm overhang from center of last axle
- Ramp eye detachable at the rear cross member
- Mechanical support for stowage during loading
- 1 pair of lashing points LC 6,000 daN
- 1 pair of lashing points LC 13,000 daN
Loading ramps:
- Two-piece loading ramps, length 2,850 mm + 1,540 mm, width 720 mm
- Hydraulic ramp lifting mechanism
- SuperGrip rubber surface
- Climbing strips on outside of ramps 20 mm x 20 mm x 100 mm
- Laterally adjustable by hydraulic cylinder to maximum external width of 2,790 mm or minimum internal spacing of 480 mm
- Integrated mechanical lock in ram lift cylinder for securing in transport position
- Mounting bracket for beacon light
Hydraulics:
- Hydraulic coupling for tractor unit (1 set), connectors for tractor, hydraulic pump on tractor unit with maximum 60 l/min delivery rate
- Hydraulic hand emergency pump
- Electric-hydraulic power pack
Rear steering:
- Rear steering bottle for manual steering of trailer axles by cable remote control, spiral cable extendable from 1.5 m to 5 m
Accessories included:
- Spare wheel holder at front of gooseneck, pluggable, galvanized
- Mounting bracket for stakes on gooseneck
- 2 pairs warning signs, approx. 423 mm x 423 mm
- Widening kit incl. widening beams, hook-on widening element at vehicle rear
- 1 pair wheel chocks incl. holder
- 1 spare wheel
- Central lubrication system with 2 grease pumps
- Single-color paint finish in RAL-1001 beige
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Goldhofer4-Achs-Tele-Semi mit hydr. Doppelklapprampen
Pokliči
Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design:
- Closed outer frame with cutouts for lashing straps (LC 1,500 daN)
- Steel floor with anti-slip coating
- Including perforated rail for aluminum approach ramps
- 2" king pin
- Manually operated BPW landing legs
- 550 mm long, 8° chamfer at end of gooseneck
- Front wall including park position for rear wall, 400 mm high
- Spare wheel holder mounted vertically on the front side of the gooseneck
- 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck
- Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized)
- Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center
- 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left
- 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right
Loading platform, single-extendable:
- Closed outer frame with cutouts for lashing straps (LC 1,500 daN)
- Fixed section at front 700 mm
- Steel plate floor with anti-slip coating
- Chamfered transition between fixed part and deck for bridging rails and wheel recesses
- Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm
- Prepared for hydraulic ramps (electrical supply)
- Rails to widen up to 3,000 mm
- 8° chamfered vehicle rear, 550 mm long
- Slide system for easy mounting/dismounting of ramps
Lsdpfx Aji Ai E Roibjhf
- Continuous mud flap at the rear
- 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck
- 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform
- 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform
- 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform
- 1 pair of stanchion pocket rails approx. center of the loading area
- 1 pair of stanchion pocket rails on the fixed part
- 1 pair of stanchion pocket rails behind the last axle
Ramps:
- Hydraulic double-folding ramps, 2,750+1,500x800 mm
- Larch wood surface
- Operated by remote control (wired and wireless)
- Quick-change ramp (dismantling system)
Chassis:
- Axle brand: BPW ECO Max
- 2 ride heights
- 4 axles @ 10 t (technically 12 t)
- Twin tires 245/70 R17.5
- 2 x rigid axles and 2 x friction-steered axles
- Reverse steering lock for friction-steered axles via reverse gear
- Brake system by Knorr (according to EU standards with EBS-E)
- Knorr TIM G2 (Trailer Information Module)
- RSS (Roll Stability Support) stability control
- Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible)
Accessories:
- 4 wheel chocks with holder
- 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm
- Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included
- Plug-in bulkhead at the end of the excavator trough
- Electrohydraulic unit for ramp operation
- Ramp control by wireless remote
- Hydraulic rear support legs for stabilization during loading
- 1 pair of additional reversing lights at the rear, activated when reversing
- Larch wood widening planks (option)
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Faymonville6-Achs-Tele-Semi mit PA-X Achssystem
Pokliči
Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck:
Lsdpfjk Af Svox Aibjhf
- Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10°
- Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles
- Open in the rear third
- For tractor units: 6 x 4 and 8 x 4
Load platform:
- Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°
- Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm
- Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length
Ramps:
- One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide
- Hydraulically foldable ramp tips
- Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward
- 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform
- Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles, Suspension, and Tires:
- PA-X axle system, all axles hydro-mechanically forced steered
- Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position
- 245/70 R 17.5 3PMSF
Accessories included:
- Plug-in steel front wall, approx. 400 mm high
- Supply line connection strip for tractor unit, mounted at the height of the outer frame profile
- 1 spare wheel
- Outer beams of gooseneck with mounting holes for bolted lashing rings
- First hole approx. 200 mm from front, then every approx. 400 mm
- 2 pairs of screw-in lashing rings included
- Chequer plate covering over the gooseneck
- On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high
- On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high
- 3.5" king pin / 2" king pin mounted
- Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide
- 4 chocks
- 4 axle load gauges
- Mechanical drop tube supports at the front
- 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm
- Mechanical drop tube supports at the front
- Continuous steel deck with baked-in sand layer as anti-slip protection on the platform
- 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements
- Sand coating on support surfaces of the intermediate table
- Mechanical locking for securing the intermediate table on the extension
- 8 pairs of stake pockets in the outer frame
- Extendable (galvanized) widenings, approx. 230 mm per side
- 1 pair of hydraulic rear supports
- Central lubrication system
- 1 reversing spotlight each on left and right rear of the vehicle
- 3 kW electro-hydraulic power unit
- Loose widening planks in reinforced steel U-frame
- Radio and cable remote control
- 4 warning signs, approx. 423 x 423 mm
Mali oglas
Regensburg
385 km
Polpriklopnik z nizko nakladalno ploščadjo
COMETTO Semi-Tieflader 6 Achs - Teleskop Nr: 202
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 84.000 kg, skupna masa: 105.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2000, Oprema: ABS, Vehicle Identification Number: ZCAS64M23Y0012202
HYDRAULIC SUSPENSION - Permissible total weight: 105,000 kg
Fifth wheel load: 27,000 kg - Axle loads: 6 x 13,000 kg
Unladen weight: 21,000 kg
RO HU due
Gooseneck: 3,900 mm
Saddle height: 1,350 - 1,450 mm
Low bed: Length: 13,550 mm (600 mm of which tapered) -- Width: 3,000 mm -- Loading height: 920 mm
Lodpfox Txllox Aibjhf
TELESCOPIC (with sliding table - 500 mm)
Insertable rails
Axle loads technical: 6 x 13,000 kg
ROR axles with drum brakes
Axle 1 = LIFTABLE
Axles 2, 3, 4, 5, 6 = FORCED STEERED
Tyres: 9.5 R 17.5
We expressly reserve the right to make changes, prior sale, and errors. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sale of goods. The details in the purchase agreement are binding.
Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be pleased to provide a quote from our partner workshops! The vehicle may be labelled and/or branded for advertising purposes. Our general delivery and payment terms apply.
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Meusburger3-Achs-Tele-Semi mit 1 Paar Radmulden
Pokliči
Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Chassis:
-Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm
-Frame neck 200 mm with beveled front corners
-Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area)
-2 king pin positions with replaceable 2” king pin
-Outer frame closed to the outside as hole profile outer frame
-Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
-Frame before and after extension with 80x80 mm step
-Reinforced frame design / point load support in retracted position at center of gravity
-Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame)
-With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle
-1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm
-Underrun protection = extended rear plate
-Drop support legs at rear
Floor:
-35 mm larch wood floor with aluminum omega profiles
Lsdpfeywv Ixox Aibohf
Axles, Steering and Tires:
-BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm
-S-cam brakes 300/200 mm, asbestos-free brake pads
-Automatic slack adjuster
-Lift-and-lower system with total lift approx. 200 mm
-2nd ride height via ball valve +50mm
-1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer
-3rd axle is a friction-steered trailing axle with electric and mechanical lock
-12 steel disc wheels, 10-hole, centrally offset
-12 tires 245/70 R 17.5 143/141J, tubeless
-Including tire pressure monitoring
Accessories:
-Removable drop sides and rear wall on the gooseneck, approx. 400 mm high
-Spare wheel holder
-Lateral aluminum side underrun protection
-4 wheel chocks with bracket
-Elongated license plate holder in the rear plate
-1 plug-in ECE sign at rear
-11 pairs of 10t lashing modules at the sides:
2x on gooseneck
2x on cargo bed in front of the extension
7x after extension
-Without rear towing eyes
-Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm
-4 holders for warning boards, insertable in stake pockets on the cargo bed
-6 pairs of side stake pockets for plug-in stakes 100x50 mm
-2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions)
-3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle)
-2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container
-Rubber apron mounted on underrun protection
-Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps
Optional: the trailer is available with aluminum loading ramps
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Tele-Semi mit 1 Paar Radmulden
Pokliči
Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis:
- Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm
- Neck height 200 mm with chamfered front corners
- Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer)
- 2 kingpin positions with replaceable 2” kingpin
- Outer frame closed to the outside as perforated outer frame
- Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
- Frame before and after extension with 80x80 mm step
- Reinforced frame design / point load focused in the retracted state
- Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame)
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle
- 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm
- Underrun protection = extended end plate
- Drop support legs at the rear
Axles, Steering and Tyres:
- BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lifting and lowering device with total lift approx. 200 mm
- 2nd driving position via ball valve +50mm
- 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, centered by offset
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Including tyre pressure monitoring
Accessories:
- Plug-in side and rear boards on swan neck, approx. 400 mm high
- Spare wheel holder
- Side aluminium underrun protection
- 4 wheel chocks with holder
- Elongated number plate holder in end plate
Ljdpfx Ajxnnk Dsibshf
- 1 removable ECE sign at the rear
- 11 pairs ZK modules 10t, on the side:
- 2x on the swan neck
- 2x on the loading platform in front of the extension
- 7x after the extension
- Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm
- 4 plug-in holders for warning signs in stake pockets on loading platform
- 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm
- 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions)
- 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle)
- 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underrun protection
Optional: The trailer is available with ramps.
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Tele-Semi-1P. Radmul.-hydr.Rampen
Pokliči
Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis:
- Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm
- Frame neck 200 mm with chamfered corners at the front
- Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel)
- 2 king pin positions with replaceable 2” king pin
- Outer frame closed to the outside and designed as perforated outer frame
- Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically
- Frame with 80x80 mm step at and after extension joint
- Reinforced frame design / maximum point load when retracted at center of gravity
- Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame)
- With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end
- 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep
- Rear underrun protection = extended rear plate
- Drop-down supports at the rear
Ramps:
- 2 two-piece loading ramps, special design with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit)
- Width approx. 800 mm
- Wooden surfacing
- Including anti-slip strips on ramps
- Can be locked in transport position with tie-down straps
- Operated by control lever mounted on rear right in frame
- Hydraulically laterally adjustable
Floor:
- 35 mm larch wood floor with aluminium omega profiles
Lodpfx Aexgm S Djibohf
Landing legs:
- Mechanical 24-ton landing legs with single-sided operation and compensating device
Axles, steering and tires:
- BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering system with total lift approx. 200 mm
- 2nd driving position via ball valve +50 mm
- 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center offset by center bore
- 12 tires, 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring system
Accessories:
- Insertable side and rear stakeboards on the swan neck, approx. 400 mm high
- Spare wheel carrier
- Side aluminium underrun protection
- 4 chocks
- 1 plug-in ECE rear warning board
- 11 pairs of ZK modules 10t, lateral:
- 2x on the swan neck
- 2x on loading area before extension
- 7x after extension
- Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width
- 4 plug-in sockets for warning signs in stake pockets on the loading platform
- 6 pairs of stake pockets laterally for 100x50 mm stakes
- 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions)
- 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle)
- 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underrun protection
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 4-Achs-Tele-Semi mit Rampen, zwgl.
Pokliči
Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°.
3 pairs of lashing rings
30 mm thick hardwood flooring
Extendable loading platform:
Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings
3 pairs of outward-folding lashing rings
1 pair of flat lashing rings at the front of the loading area
Cut-outs in the outer frame of the loading area for inserting tension straps
Hardwood flooring approx. 48 mm thick, checker plate covering above the axles
Two-part steel ramps:
One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering.
Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg
Landing legs:
JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and tires:
BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
Tires 245/70 R 17.5
Lsdpfel Uxdkex Aibehf
Braking system:
Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit
Steel construction:
Steel construction made from high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Paintwork:
First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer
High-quality one-color two-component (2K) top coat in Novagrau
Rear section metallized and painted in RAL 9010 (pure white)
Metallic paint not possible
Electrical system:
Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
Connections conforming to ISO
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories included:
2" kingpin
One galvanized steel headboard approx. 400 mm high
At the galvanized front connection strip, yellow-red air couplings
4 wheel chocks with holders at the headboard
One spare wheel with holder in front of the headboard
Electro-hydraulic power unit
Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles
Bracket at rear of gooseneck for ALU drive-on ramps
European reflector signs (red-yellow) at trailer rear
White reflective tape according to EU regulations at the sides, at the extension, and red at the rear
At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket
One holder for beacon at trailer rear
Galvanized folding supports under the loading platform chamfer
Ramp operating valves fitted on the right side of the trailer
Cover plates to bridge the gap between ramps and loading platform
One mudflap at trailer rear
Manual and description on USB stick
Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard
On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm
The rear galvanized stakes are removable, superstructure length approx. 2,560 mm
One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap
4 pairs of WADER container pockets in the loading area for a
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Pokliči
Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading Platform:
Extendable loading platform with rear chamfer approx. 500 mm x 8°
8 pairs of flip-out lashing rings
1 pair of recessed lashing rings at the front of the loading area
Cutouts in the outer frame for securing straps
Approx. 48 mm thick hardwood flooring; checker plate above the axles
Two-Part Steel Ramps:
One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg.
Landing Legs:
• JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load)
Axles and Tyres:
BPW axles and suspension, 4th and 5th axle self-steering
Technical axle load: 12,000 kg
4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually
Tyres: 235/75 R 17.5 3PMSF
Brake System:
Brake system according to EU regulations with EBS-E (4S3M)
Sockets and Lighting:
Electrical system according to EU standards, 24 Volt lighting
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets
Connections per ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Paintwork:
Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer
High-quality single-colour 2K topcoat in MB 7350 Novagrau
Rear section metallized and painted in RAL 9010 (pure white)
No metallic paint finish possible
Lhsdpfx Aijl Sl Izobof
Steel Structure:
High-strength fine-grained steel construction
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Accessories:
One spare wheel with holder in front of the front wall
2" king pin
Galvanized steel front wall approx. 400 mm high
Yellow-red air couplings on the galvanized front connection panel
2 wheel chocks with holder on the front wall
Mounting at the rear of the gooseneck for ALU approach ramps
Bracket for beacon at trailer rear
Galvanized supports under sloped area of load floor
White reflective tape per EU regulations on sides, extension, and red at the rear
Electro-hydraulic unit under the rear of loading platform
Warning sign brackets including sockets left/right on gooseneck and rear plate
Control valves for ramps mounted right side of trailer
Mudflap at rear of trailer
Manual and documentation on USB stick
3.5" loose king pin supplied
On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH)
Removable rear galvanized stakes
(Body length approx. 2,560 mm)
3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container
6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame
Galvanized extensions, extendable by approx. 230 mm per side
Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload
Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor
Checker plate coverings above the king pin and loading area...
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
MAX Trailer4-Achs-Tele-Semi-zwangsgelenkt
Pokliči
Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Extendable load area:
- Extendable loading platform with rear bevel approx. 1,000 mm x 8°
- 5 pairs of fold-out lashing rings (LC 5,000 daN)
- 3 pairs of fold-out lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN)
- Cut-outs in the outer frame for tensioning straps (LC 2,000 daN)
- Hardwood floor approx. 48 mm thick, checker plate over the axles
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load)
Brake system:
- WABCO brake system according to EU regulations with EBS-E (4S3M)
Steel construction:
- High-strength fine-grained steel chassis
Axles and tires:
- BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valve
- Axle tool kit
- TPMS tire pressure monitoring system to ECE R 141
- Tires: 245/70 R 17.5 3PMSF
Accessories included:
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection bar
- 4 wheel chocks with holders on the front wall
- One spare wheel with holder in front of the front wall
- Electro-hydraulic power unit
- Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles
- European reflective panels (red-yellow) on trailer rear
- White reflective tape in accordance with EU regulations on sides and on extension, rear red
Lhodpfx Aisykpbkebjf
- Mountings on gooseneck and rear left/right for warning signs, incl. socket
- Galvanized extensions, pull-out approx. 230 mm per side
- Mount for rotating beacon at rear of trailer
- Galvanized folding supports under the rear slope of the loading area
- Mudflap at the rear of the trailer
- Manual and documentation on USB stick
- BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard
- Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm
- Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm)
- INOX toolbox 1,350x400x400 mm on gooseneck
- Note: toolbox covers oil filler cap
- 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container
- 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame
- Sliding mounting bar for ALU loading ramps at the rear of the vehicle
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section
- Lift axle on front axle with control via TEBS-E depending on current axle load and load condition
- Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light
- Mounting for rotating beacon on the warning boards
- Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring
- Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance
- 80 km/h speed stickers on rear and both sides
- Load gauge for axle load measurement, incl. load diagram
Mali oglas
Regensburg
385 km
Polpriklopnik z nizko nakladalno ploščadjo
BROSHUISSemi Tieflader 5 Achser SAF TELESKOP - Nr.: 036
Pokliči
Stanje: rabljeno, skupna masa: 70.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1998, Oprema: ABS, Vehicle identification number: XL952N5SAWL007036
Fifth wheel load: 20,000 kg - Axle loads: 5 x 10,000 kg
Lsdpfx Aijyx N Dvebjhf
Unladen weight: 13,100 kg
Roadworthiness test (HU) due
Neck length: 4,100 mm
Coupling height: 1,250 mm
Low-bed: Length: 9,200 mm (650 mm thereof chamfered) -- Width: 2,525 mm -- Loading height: 880 mm
Extendable by 6,200 mm
Widenable to 3,000 mm
Detachable rails
Axle load (technical): 5 x 10,000 kg
SAF axles with drum brakes
Axles 1, 2: liftable
Axles 5, 6: friction-steered
Tyres: 235/75 R 17.5
=====
Subject to changes, prior sale and errors. The description is for general identification of the vehicle and does not constitute a warranty in the legal sense. The purchase contract description is binding.
Our offer is generally without new roadworthiness inspection (TÜV approval). If a new TÜV approval is required, we will gladly provide you with an offer from our partner workshops! Vehicle may be stickered and/or lettered with advertisements. Our general terms and conditions of delivery and payment apply.
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville5-Achs-Doppeltele-Semi-zwangsgelenkt
Pokliči
Stanje: rabljeno, lastna masa: 16.500 kg, največja dovoljena obremenitev: 67.500 kg, skupna masa: 84.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and function report.
Gooseneck:
- Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10°
- For tractor units: 6x2, 6x4, and short 8x4
Extendable loading platform:
- Loading platform, double-extendable, approx. 8,800 mm long with rear bevel approx. 500 mm x 10°
- A support table approx. 300 mm wide with elongated slots for hook-in and adjustable bridging elements is welded to the central beam, both front and rear
Hydraulic loading ramps:
- Removable hanging rail with bracket for mounting EU reflectors, warning signs, and speed stickers
- Hardwood covering on the loading deck's sloped area
- Control valves for the hydraulic ramps located on the right side of the vehicle
Axles and tires:
- BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered
- 1st axle equipped with electro-magnetic reverse lock, activatable via reverse gear and manually
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5 3PMSF
- TPMS tire pressure monitoring system in accordance with ECE R 141
- TPMS tire pressure sensors fitted in all wheels, including spare wheels
Accessories included:
- Plug-in steel front wall, approx. 400 mm high
Lhjdoyvrvcopfx Aibof
- Yellow-red air couplings at the connector panel
- 3 kW electro-hydraulic unit for controlling hydraulic functions (excluding hydraulic winches)
- 1 spare wheel
- Outer beam of gooseneck with mounting holes for bolted lashing rings
- First hole approx. 200 mm from the front, then every approx. 400 mm
- 2 pairs of screw-in lashing rings included (LC 5,000 daN)
- 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN)
- On the gooseneck, 1 pair of plug-in side ALU drop sides, approx. 400 mm high, anodised
- On the gooseneck, one plug-in ALU rear wall, approx. 400 mm high, anodised
- Approx. 40 mm thick hardwood flooring over the gooseneck
- 3.5" kingpin
- Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
- Round NATO socket at the front connector panel
- One-piece INOX toolbox approx. 2,480 x 340 x 390 mm
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B - static test load = 50,000 kg
- Continuous hardwood flooring (approx. 50 mm thick) on the loading platform and interrupted between the axles
- Loading platform locking with conically welded locking profiles, every 500 mm over the first 3,000 mm of extension on the large cross-section extension tube; thereafter, every 1,000 mm
- On the small cross-section extension tube, one locking point approx. every 3,000 mm and at full extension
- Elongated slots for hook-in and movable bridging elements at the front of the loading deck
- 1 pair of lashing rings on the front cross beam (LC 10,000 daN)
- 7 pairs of retractable lashing rings in the outer frame of the loading platform, foldable outward (LC 10,000 daN)
- Extendable widenings of approx. 230 mm per side
- 1 pair of mechanical rear supports
- Central lubrication system, 2-pump, brand BEKAMAX
- Radio and cable remote control
- 2 axle load gauges installed on the left side, including axle load diagram
- 1st axle with automatic lift axle function
- 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm
Mali oglas
Kirchberg
504 km
Polpriklopnik z nizko nakladalno ploščadjo
Semi Trailer 26 FGM 2-Achs Tieflader
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 19.080 kg, skupna masa: 28.480 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700,
Ljdpsykgkcefx Aibohf
Mali oglas
Petershagen
821 km
Polpriklopnik z nizko nakladalno ploščadjo
GOLDHOFERTop-Zustand, 2-Achs Tieflader mit Rampen
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 25.750 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2005, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Oprema: ABS, Goldhofer 2-osna nizkopodna prikolica
Ledpfeyn Tu Asx Aibjhf
* Gigant osi z bobnastimi zavorami
* Zračno vzmetenje
* Krmilne osi
* Rotacijska opozorilna luč
* Delovne luči
* Pnevmatske gume 235/75 R17,5
Pozor: Vozilo je bilo leta 2025 obnovljeno. Nova barva in popolnoma prenovljena tehnika.
Za dodatne informacije smo vam na voljo.
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Goldhofer2+4-Achs-Tiefbett-Kombination VP 6
Pokliči
Stanje: novo, lastna masa: 27.000 kg, največja dovoljena obremenitev: 72.500 kg, skupna masa: 99.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 550 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 r 17,5, barva: siv, Oprema: ABS, Swan neck, detachable:
Loading area: 3,750 mm x 2,480 mm
Technical fifth wheel load up to max. 30,000 kg
Lsdpfx Aijhlz Rnsbohf
Hydromechanical steering
Hydraulic lift and lowering function
2 support cylinders
Hydraulic function controls on the left travel direction side
Access ladder to swan neck
Hydraulic claw locking for deck or chassis
Multi-function quick coupling
Lighting for swan neck control elements under the fold-down protective cover
3.5" king pin
2-axle front chassis:
4 wheels per axle line, ball bearing slewing ring-mounted pendulum axle assemblies
Axle make: Gigant
Chassis width 2,750 mm / Wheelbase 1,510 mm
Hydraulic axle compensation, stroke 600 mm
Ride height: 1,145 mm +340 mm/-260 mm
Floor covering: sheet metal
Brake system 2-axle front chassis:
Drum-type, all-wheel pneumatic brake system
Automatic load-dependent brake (ALB) (AGS)
Parking brake via spring-loaded cylinders
EBS / ABS (Electronic Braking System)
EBS socket at the front of the swan neck
Duomatic coupling for brake connection between chassis and loading deck
Excavator bridge 5,500 mm to 10,000 mm:
Box-type inner/outer tubes
Outer tube height 400 mm
Load height 550 mm, ground clearance 150 mm
Preparation of outer tube for attachment of fold-out extensions
4-axle rear chassis:
4 wheels per axle line, ball bearing slewing ring-mounted pendulum axle assemblies
Axle make: Gigant
Chassis width 2,750 mm / Wheelbase 1,510 mm
Hydraulic axle compensation, stroke 600 mm
Ride height: 1,100 mm +385 mm/-215 mm
Floor covering: sheet metal
Combined excavator/basin trough
Brake system 4-axle rear chassis:
Drum brake with automatic load-dependent brake (ALB) (AGS)
Two-line all-wheel pneumatic brake system
Parking brake via spring-loaded cylinders
EBS / ABS (Electronic Braking System)
Vehicle rear:
Standard 90° design, 580 mm overhang from center of last axle
No ramp brackets on rear cross member
Hydraulics:
Hydraulic connection for tractor unit (1 set), couplings for tractor (without lines), pump on the tractor unit with max. 60 l/min flow rate, additional flow divider for tractor units up to 120 l/min.
6-way block valve in the swan neck, for depressurization of the swan neck articulation
Hydraulic unit with Hatz diesel engine 10 kW, sound-insulated, hydraulic pump capacity 12 l/min, incl. electric starter and manual throttle adjustment, mounted on the side of the swan neck, standard paint DB7350 nova grey, weight approx. 460 kg
Accessories included:
Spare wheel carrier on the loading area of the swan neck with one mounted spare wheel
2 pairs of wheel chocks
Aluminium drop sides, closed on 3 sides (including rear wall), height 400 mm, stakes (foldable and removable)
Goldhofer stowage box "Premium", mounted at front of swan neck, corners chamfered at 45°, dimensions approx. 550 x 400 x 2,540 mm, with side doors and forward-folding rectangular lid, lockable doors and lid, 2 removable internal partitions
2 pairs of warning panels, 423 x 423 mm, with 3 LED position lights each, incl. mounting tube for beacon, holders for warning panels extendable up to max. 4,200 mm
Additional warning sign holder, mounted on the front chassis
LED beacons (2 pcs), plug-in, light controlled via parking light
Central lubrication system, type "Progressive" for standard grease, with 3 pumps
2 pairs of lashing points M36, bolted, LC=16,000 daN, loose
1 "Convoi Exceptionnel" sign
1 set of aluminium drive-on ramps for front access to the excavator bridge, 2-piece, with climbing strips
Mali oglas
Wiesmoor
957 km
Polpriklopnik z nizko nakladalno ploščadjo
BROSHUIS3ABSD-48 3-Achs Semi-Tieflader 2-fach Teleskop S
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 34.440 kg, skupna masa: 46.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 46.500 kg
Lastna masa: 12.060 kg
Nosilnost: 34.440 kg
Skupna dolžina: 13.550 mm - 26.550 mm
Širina: 2.550 mm
Dodatne informacije
- 3 osi hidravlično prisilno vodene
- Klin za preusmeritev nad sedlom
- Vpenjalna letev za rampe
- Vstavni koli na nakladalni površini
- Dvojno teleskopsko raztegljiv do 26.550 mm
- Orodni kovček na labodjem vratu
- E-kolo
- priprava za eln
- hidravlična funkcija sledenja z električnim daljinskim upravljanjem
Lodeycpbnspfx Aibshf
- velik paket za pritrditev
- lastna hidravlična črpalna enota
Na voljo tudi novi in rabljeni polpriklopniki nizkopodnežnega tipa.
Več informacij na
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedr.
Pokliči
Stanje: rabljeno, lastna masa: 10.650 kg, največja dovoljena obremenitev: 40.310 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2024, obratovalna teža: 10.650 kg, Oprema: ABS, For every used semi-trailer, you receive a current and complete inspection and functional report.
Gooseneck:
- Gooseneck with 30 mm thick hardwood flooring
- Rear section of gooseneck straight design
- 3 pairs of lashing rings (LC 5,000 daN)
Loading area:
- Extendable loading area design
- 5 pairs of fold-out lashing rings (LC 5,000 daN)
- 3 pairs of fold-out lashing rings (LC 10,000 daN)
- 1 pair of flush-mounted lashing rings at the front of the loading area (LC 10,000 daN)
- Cutouts in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, with checker plate flooring over the axles
Axles and Tyres:
- BPW axles, two fixed and two self-steering axles
- Air suspension, drum brakes, with raise/lower function
- Self-steering axles with electro-magnetic reverse lock, activatable via reverse gear or manually
- Axle tools
- Tyres 205/65 R17.5
Braking system:
- WABCO braking system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel construction made from high-strength fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Paintwork:
- First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat finish, single color, in Nova Grey
Accessories included:
- Spare wheel holder in front of the front wall
- 2" king pin
- Galvanized steel front wall, approx. 400 mm high
- On the galvanized connector bar at the front, yellow-red air couplings
- 4 wheel chocks with holders at the front wall
- Galvanized folding supports under the loading area slope
- Bracket for a revolving beacon at the rear of the trailer
- Extendable galvanized side extensions, approx. 230 mm per side
- White reflective tape on the sides in accordance with EU regulations, at extension and red at the rear
- Mounts for warning boards on both sides of the gooseneck and rear apron, including socket
- Rear mudflap
- European reflective signs (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system according to ECE R 141
- Plug-in ALU side and rear walls on the gooseneck, approx. 2,440 x 400 mm
Lhsdpfxsxfa E Uj Aibsf
- Rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
- 7 pairs of WADER container pockets: 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container over the gooseneck; 2x 20ft container
- 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading area
- Lift axle on the front axle with TEBS E control depending on current axle load and load condition
- Movable hanging rail for ALU loading ramps at the rear of the vehicle
- Sanded anti-slip coating painted on checker plates on the gooseneck and loading platform
- Four approx. 400 mm extendable warning boards, approx. 423 x 423 mm, with position light
- Mount for beacon on warning boards
- 80 km/h speed stickers on the rear and both sides
- Load gauge for axle load determination, including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces hot galvanized with ZINACOR 850 metallization (zinc 85%, aluminium 15%)
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
MAX Trailer2-Achs-Tele-Semi Sattelauflieger
Pokliči
Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Extendable loading platform:
- Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8°
- 5 pairs of folding external lashing rings (LC 5,000 daN)
- 3 pairs of folding external lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tyres:
- BPW axles, hydro-mechanically forced steering
- Technical axle load: 12,000 kg
- Air suspension with raise/lower valve
- Axle tool kit
- TPMS tyre pressure monitoring system according to ECE R 141
- Tyres: 235/75 R17.5 3PMSF
Accessories included:
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection strip
Lhodsyxc Eyopfx Aibjf
- 2 wheel chocks with holder on the front wall
- One spare wheel with holder in front of the front wall
- Electro-hydraulic unit
- Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring
- European reflective warning plates (red-yellow) at the rear of the trailer
- White reflective tape according to EU regulations on the sides and on the extension, red at the rear
- Gooseneck and rear left and right brackets for warning signs, including socket
- Sliding hook-in bar for ALU loading ramps at the rear of the vehicle
- One bracket for a rotating beacon at the rear of the trailer
- Galvanized folding supports under the rear bevel of the loading platform
- One mudguard at the rear of the trailer
- Operating manual and documentation on USB stick
- Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover
- Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm
- The rear galvanized stanchions are removable (body length approx. 2,560 mm)
- 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container
- 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
- One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel
- Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light
- On the warning signs a bracket for a rotating beacon
- Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring
- On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection
- Speed sticker 80 km/h at the rear and on both sides
- Axle load gauge for determining axle loads, including load diagram
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen
Pokliči
Stanje: rabljeno, lastna masa: 14.350 kg, največja dovoljena obremenitev: 48.650 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Gooseneck:
- SNT design gooseneck for optimized loading platform length, length approx. 3,700 mm
- Gooseneck rear with approx. 1,000 mm x 10° bevel
Loading Platform:
- Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10°
- Recessed area in platform and bevel for accommodating the excavator’s dipper stick
Ramps:
- 1 pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with hardwood decking
- Hydraulically folding ramp tips
- Ramps hydraulically adjustable individually, approx. 235 mm outward and 215 mm inward
- Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the ramp outer frame
Axles and Suspension:
- BPW axles and suspension, first axle steering assist, all other axles forced steered hydromechanical
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reverse-lock, activated via reverse gear or manually
- Air suspension with lift/lower valve
- 235/75 R 17.5 tires
- TPMS tire monitoring system
Ljdpfxoyrfn Ns Aibshf
Included Accessories:
- Detachable steel front wall, approx. 400 mm high
- 3kW electro-hydraulic power pack for hydraulic controls (except hydraulic winches)
- Park position for warning signs on gooseneck when not in use
- 1 spare wheel
- Gooseneck outer beams with fixing holes for bolted lashing rings
- First borehole approx. 200 mm from the front, then every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of recessed lashing rings at the rear of the gooseneck
- Gooseneck with 1 pair of plug-in anodized ALU sideboards, approx. 400 mm high
- Gooseneck with plug-in anodized ALU rear board, approx. 400 mm high
- Gooseneck deck with 40 mm thick hardwood, with checker plate above king pin
- 2" king pin
- Guide plate on gooseneck for fifth wheel, approx. 500 mm wide
- Round NATO socket on the front connector strip
- 4 wheel chocks
- Mechanical landing legs with 2-speed gearbox and crank
- Loading platform with continuous and between-axle interrupted approx. 50 mm thick hardwood deck
- Platform locking with conically welded locking profiles every 250 mm
- Including pre-tensioning plate
- 1 intermediate table, approx. 300 mm wide, for extension tube with large cross-section; intermediate table has offset loading surface and extendable hanging rails for aluminum bridging elements
- 1 pair of lashing rings on the front cross member
- 8 pairs of recessed lashing rings in outer frame of platform, can be folded outwards
- Galvanized extensions extendable by approx. 230 mm per side
- Wheel wells with square climbing bars, 15 x 15 mm, open continuously in front of the axles to the gooseneck cross member, approx. 700 x 410 mm
- ALU covers for wheel wells, also usable as bridging elements for extension or as widening planks
- Aluminum elements lockable onto extension tubes of the widenings
- Extendable U-profiles for ALU covers
- Wheel wells with square climbing bars, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- 1st axle with automatic lift axle function
- 4 warning signs, approx. 423 x 423 mm
- Radio and cable remote control
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen-zg
Pokliči
Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report.
Gooseneck:
Lodpfxjypb Ake Aibjhf
- Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long
- Gooseneck rear with chamfer, approx. 1,000 mm x 10°
Loading platform:
- Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10°
- A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick
- Pneumatic locking with conical locking bolts and reinforced locking positions
- Hardwood surface on the chamfer of the loading platform
Ramps:
- 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with hardwood inlay
- Hydraulically foldable ramp tips
- Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles and Suspension:
- BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension
- Tyres 235/75 R 17.5
- TPMS tyre monitoring system
- TPMS tyre pressure sensors
Included Accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3kW electro-hydraulic unit for hydraulic operations
- 1 spare wheel
- Outer beams on the gooseneck with fixing holes for bolted lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear of the gooseneck
- On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
- On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized
- 2" kingpin
- Round NATO socket at the front connection bar
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front crossmember
- 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards
- Extendable galvanized outriggers, approx. 230 mm per side
- Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm
- ALU covers for the wheel recesses
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- Widenable U-profiles for inserting the ALU covers
- Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- 1 pair of mechanical rear supports
- Remote steering control from both front and rear by cable remote control, with axle single-track alignment control
- 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535
- Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame
- Central lubrication system with 1 pump, BEKAMAX
- Radio remote control for steering in addition to cable remote
- Wabco Smart Board system
- 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Pokliči
Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Load Area:
- Extendable loading area with rear taper approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions
- Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN)
- 5 pairs of folding lashing rings on the outside (LC 5,000 daN)
- 2 pairs of folding lashing rings on the outside (LC 10,000 daN)
- 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN)
- Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN)
Ledpoup U Hzjfx Aibohf
- Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc.
Two-piece Steel Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing
- Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 steering trailing axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tool kit
- Tyres 235/75 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141
Accessories Included:
- Mounts for warning signs left and right at the gooseneck and at the rear, each with socket
- One spare wheel
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings at the galvanized front connector strip
- 4 wheel chocks
- Galvanized, extendable outriggers approx. 230 mm per side
- Galvanized folding supports beneath the loading area bevel
- Rear trailer bracket for rotating beacon
- Cover plates for bridging the gap between ramps and load area
- White reflective tape to EU regulations, sides and on extensions; rear in red
- Electro-hydraulic unit installed at the rear beneath the loading area
- Ramp control valves mounted on right trailer side
- European reflective panels (red-yellow) on rear of trailer
- Four extendable warning boards, approx. 423 x 423 mm, with position light
- Bracket for rotating beacon on warning boards
- Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm
- Rear galvanized removable stakes (structure length approx. 2,560 mm)
- 2 pairs of WADER container pockets in loading area for 20ft or 30ft container
- 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area
- Removable, galvanized intermediate table with 1 pair of WADER container pockets
- Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling
- Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection
- 80 km/h speed stickers rear and both sides
- Load manometer for axle load measurement, including load chart.
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Tele-Semi m. hydr. Rampen-nlla.
Pokliči
Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck:
• Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Extendable loading platform:
• Loading platform in extendable design with rear taper approx. 1,000 mm x 8°
• Cut-outs in outer frame of loading platform for attaching tensioning straps
• Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles
Two-piece steel ramps:
• One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering
• Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable
• Maximum load per pair: approx. 40,000 kg
Axles and tires:
• BPW axles and suspension, 2 rigid axles, 1 self-steering axle
• Technical axle load: 12,000 kg
• Electromagnetic reverse lock, activated via reverse gear or manually
• Air suspension with lift and lower valve
• Axle tools
• 235/75 R 17.5 3PMSF
Braking system:
• WABCO braking system according to EU regulations with EBS-E
Paintwork:
• First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer
• High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint
• Rear section metallized and painted in RAL 9010
Landing legs:
• JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load)
Steel construction:
• Steel construction made of high-strength fine-grain steels
• Steel grades:
• S355J2+N/S355MC
• S690QL/S700MC
Electrical system:
• Electrical system in accordance with EU regulations, 24 Volt lighting
Ledpfx Ajhlz S Njibshf
• ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets
Accessories included:
• One spare wheel with holder
• Galvanized steel front wall approx. 400 mm high
• Yellow-red air couplings on the galvanized front connection panel
• 4 wheel chocks
• Rear mounting bracket for beacon light at the end of the semitrailer
• Recess at rear of gooseneck for ALU approach ramps
• Galvanized folding supports under the loading platform taper
• Cover plates to bridge the gap between ramps and loading platform
• White reflector tape per EU regulations on sides, extension, and red at rear
• Electro-hydraulic unit at rear, under the loading platform
• On gooseneck and ramps, left and right, each with a holder for warning signs, including socket
• Operating valves for the ramps located on the right side of the trailer
• ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm
• The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm)
• Four warning panels extendable by approx. 400 mm with a position light
• 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container
• 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform
• Galvanized extensions, extendable by approx. 230 mm per side
• 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper
• Painted anti-slip sand layer on checker plates, above king pin and loading platform
• Load gauge for axle load measurement, including load diagram
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen zg
Pokliči
Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm
- Rear gooseneck with bevel approx. 1,000 mm x 10°
Loading Platform:
- Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°
- A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick
- Pneumatic locking with conical locking bolts and reinforced lock positions
- Hardwood covering on the loading platform bevel
Ramps:
- 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm
- Ramps with hardwood covering
- Hydraulically folding ramp tips
- Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward
- Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp
Axles and Suspension:
- BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with raising and lowering valve
- Tyres 235/75 R 17.5, twin tires
- TPMS tire monitoring system compliant with ECE R141
- TPMS sensors installed in all wheels including spares
Accessories included:
- Removable steel front wall, approx. 400 mm high
- 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches
- Parking position on gooseneck for warning boards when not in use
Lhjdpfxek Aht Uj Aibef
- 1 spare wheel
- On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised
- On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised
- Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin
- 2" king pin
- Guide plate on gooseneck for fifth wheel, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- 1 intermediate table, approx. 300 mm wide
- Extensions (galvanised) extendable by approx. 230 mm per side
- Wheel recesses with square climbing cleats
- ALU covers for the wheel recesses
- 1 pair of mechanical rear supports
- Remote steering at front and rear via cable remote control, with single track monitoring of axles
- 1st axle with automatic lift axle function
- Central lubrication system with 1 BEKAMAX brand pump
- Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring
- Wabco Smart Board System
- 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 5-Achs-Tele-Semi-nachlaufg.
Pokliči
Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck:
• Gooseneck with rear chamfer of approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Loading Platform:
• Extendable loading platform with rear chamfer of approx. 500 mm x 8°
• 9 pairs of folding external lashing rings
• 1 pair of recessed lashing rings at the front of the loading platform
• Cutouts in the outer frame of the loading platform for attaching tension belts
• Approx. 48 mm thick hardwood flooring, checker plate above the axles
Landing Legs:
• JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and Tyres:
• BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering
• Technical axle load: 12,000 kg
• 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually
• Tyres: 235/75 R 17.5 3PMSF
Brake System:
• WABCO brake system in accordance with EU regulations including EBS-E (4S3M)
Paintwork:
• Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer
• High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau
• Rear section metallized and painted in RAL 9010 (Pure White)
Steel Construction:
• Steel structure made from high-strength fine-grain steels
Lsdpfx Aoma Hf Reibjhf
• Steel grades:
• S355J2+N/S355MC (yield strength 355MPa)
• S690QL/S700MC (yield strength 690MPa)
Accessories:
• One spare wheel with holder in front of the front wall
• 2" king pin
• Galvanized steel front wall, approx. 400 mm high
• Front galvanized connection strip with yellow-red air couplings
• 2 wheel chocks with holders mounted on the front wall
• Rear mount on gooseneck for ALU drive-on ramps
• Galvanized extendable wideners appx. 230 mm per side
• Bracket for a beacon at the rear of the trailer
• Galvanized supports under the chamfer of the loading platform
• White reflector tape on the sides as per EU regulations, red at the extension and rear
• Mounts for warning panels including socket left and right at the gooseneck and rear panel
• Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm
• Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm)
• 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container
• 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
• Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition
• Movable mounting rails for ALU drive-on ramps at the rear of the vehicle
• 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform
• BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover
• Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm
• Holder for beacon mounted on the warning panels
• European reflector plates (red-yellow) on the rear of the trailer
• 80 km/h speed limit stickers at rear and both sides
• Axle load gauge with load diagram included
• HRM Metallisation (High Resistance Metallisation) of the outer frame
• Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Faymonville4-2+2-Achs-Tele-Semi m. Radmulden u. Rampen
Pokliči
Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck:
Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm
Gooseneck rear with chamfering approx. 1,000 mm x 10°
Loading Platform:
Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10°
Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick
Pneumatic locking with conical pin and reinforced locking positions
Supply lines routed protected within the extendable beam, adapting to the respective platform length
Ramps:
1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm
Hydraulically folding ramp tips
Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside
Axles and Suspension:
BPW axles and suspension, two rigid axles, two steering trailing axles
Electromagnetic reverse lock, activated via reverse gear and manually
Air suspension with lift and lower valve
Axle tool
Tyres: 235/75 R17.5 3PMSF twin tyres
Load index: 143/141J (144/144F)
Brake System:
WABCO braking system, EBS-E in accordance with EU regulations
Lighting System:
24-volt lighting system in "ASPÖCK-NORDIK full LED"
Ljdpfx Aijk Ahugsbohf
Metalizing:
Standard HRM metallization of the outer frame
Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined
Steel Construction:
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welders certified as per DIN-EN 287-1
MAG welding process according to EN ISO 4063
Shielding gas M21 as per EN ISO 14175
Accessories Included:
Front wall made of steel, plug-in, height approx. 400 mm
ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin
24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098
Round NATO socket on the front connection strip
Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO)
3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches
1 spare wheel with mounting adapter
Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm
2 pairs of screw-in lashing rings included
One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring
1 pair of screw-in lashing rings
Approx. 40 mm thick hardwood covering above the gooseneck
On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized
On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized
2" kingpin
Gooseneck guide plate for fifth wheel, approx. 500 mm wide
4 wheel chocks with holder
Holder for aluminium approach ramps
Mechanical landing gear with 2-speed gearbox and crank
Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles
Platform locking with conically welded locking profiles every 250 mm incl. tension plate
Slotted holes at the front of the loading platform for attachable and adjustable bridging elements
1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering
Front and rear with slotted holes
Olajšamo vam iskanje: "goldhofer 6-achs-tele-semi mit hydr.rampen-zwangs."
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.


























































































































































































































































