Polpriklopnik z nizkim nakladalnikom

Faymonville MAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.

Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick

Loading area:
- Telescopic loading area with rear incline approx. 1,000 mm x 8°
- 1 pair of permanently integrated wheel wells in front of the axles, approx. 2,850 x 970 x 400 mm
- Wheel wells with 15 x 15 mm square climbing strips and lower width extensions
- Between the 1st and 2nd axle, one pair of fixed wheel wells with cover, approx. 1,610 x 970 x 400 mm
- Recess in both the incline and extending into the loading area for receiving the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- Cutouts in the outer frame of the loading area for securing straps. (LC 2,000 daN)
- Includes 3-piece removable galvanized covers over the wheel wells – max. point load 3.5 t / piece.

Hydraulic Two-piece Steel Ramps:
- A pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood overlay
- Ramps with hydraulically operated folding sections (up/down), hydraulic lifting system, and hydraulic horizontal adjustment

Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock barrier activated via reverse gear and manual control
- Air suspension with raise/lower valve
- Axle tools
- Tyres 235/75 R 17.5

Accessories included:
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with holder mounted in front of the front wall
- Yellow-red air couplings on the galvanized connector strip at the front
- 4 wheel chocks with holders on the front wall
- Rear gooseneck receiver for ALU approach ramps
Podpfx Aeup U Hzjf Nogu
- Galvanised, extendable width extensions, approx. 230 mm per side
- Galvanized folding supports under rear incline of the loading area
- Rear mounting bracket for rotating beacon at the trailer rear
- White reflective tape as per EU regulations on sides, on extension, and rear (red)
- Mounts for warning panels on both sides of the gooseneck and rear panel, incl. socket
- One mudflap at the trailer rear
- European reflective plates (red-yellow) at trailer rear
- On the gooseneck, ALU plug-in side and rear walls approx. 2,440 x 400 mm
- Rear galvanized removable stanchions (body length approx. 2,560 mm)
- 2 pairs WADER container locks in the loading area for one 20 ft or 30 ft container
- 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm in loading area outer frame
- Removable galvanized intermediate table with 1 pair WADER container locks
- Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame of loading area incline
- Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm
- Mounting for rotating beacon on warning panels
- 80 km/h speed stickers at rear and on both sides
- Load gauge for axle load determination including load chart
- HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) using hot finishing

Available as an option:
- Tool box on the gooseneck

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.