Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev

Faymonville MAX Trailer 3-A-Tele-Semi-Radmul.-Rampen

For every used semi-trailer, you receive a current & comprehensive inspection and function report.

Gooseneck:
- Gooseneck with rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood floor

Extendable loading area:
- Telescopic loading area with rear incline approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area
- Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc
- Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of swing-out lashing rings (LC 5,000 daN)
- 2 pairs of swing-out lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN)
- Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)

Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable
- Maximum load per pair: 40,000 kg

Axles and tires:
- BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock operable via reverse gear and manual activation
- Air suspension with raise and lower valve
- Axle tools
- TPMS tire pressure monitoring system compliant with ECE R 141
- Tires: 235/75 R17.5 3PMSF

Accessories included:
- Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
Rodpfxeyyldus Agfjr
- Yellow-red air couplings at the front galvanized connection rail
- 4 wheel chocks with holders
- Galvanized, extendable width extensions approx. 230 mm per side
- Galvanized folding supports under the incline of the loading area
- Cover plates to bridge the gap between ramps and loading area
- White reflective tape on sides and on extendable section, rear in red, according to EU regulations
- Electro-hydraulic unit at the rear, under the loading area
- European reflector boards (red-yellow) on the rear of the semi-trailer
- Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm)
- Bracket for rotating beacon on the warning signs
- On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm
- Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container
- 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area
- Removable, galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline
- Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area
- Speed sticker 80 km/h on rear and both sides
- Load manometer for determining axle loads, including load chart

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.