Polpriklopnik z nizko nakladalno ploščadjo

MAX Trailer 2-Achs-Tele-Semi Sattelauflieger

Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring

Extendable loading platform:
- Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8°
- 5 pairs of folding external lashing rings (LC 5,000 daN)
- 3 pairs of folding external lashing rings (LC 10,000 daN)
Nwjdpfx Ajyxc Eyjg Isd
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering

Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)

Axles and tyres:
- BPW axles, hydro-mechanically forced steering
- Technical axle load: 12,000 kg
- Air suspension with raise/lower valve
- Axle tool kit
- TPMS tyre pressure monitoring system according to ECE R 141
- Tyres: 235/75 R17.5 3PMSF

Accessories included:
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection strip
- 2 wheel chocks with holder on the front wall
- One spare wheel with holder in front of the front wall
- Electro-hydraulic unit
- Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring
- European reflective warning plates (red-yellow) at the rear of the trailer
- White reflective tape according to EU regulations on the sides and on the extension, red at the rear
- Gooseneck and rear left and right brackets for warning signs, including socket
- Sliding hook-in bar for ALU loading ramps at the rear of the vehicle
- One bracket for a rotating beacon at the rear of the trailer
- Galvanized folding supports under the rear bevel of the loading platform
- One mudguard at the rear of the trailer
- Operating manual and documentation on USB stick
- Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover
- Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm
- The rear galvanized stanchions are removable (body length approx. 2,560 mm)
- 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container
- 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
- One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel
- Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light
- On the warning signs a bracket for a rotating beacon
- Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring
- On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection
- Speed sticker 80 km/h at the rear and on both sides
- Axle load gauge for determining axle loads, including load diagram

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.