Nizki nakladalnik

Faymonville MAX Trailer 4-Achs-Tele-Semi mit Rampen, zwgl.

Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°.
3 pairs of lashing rings
30 mm thick hardwood flooring

Extendable loading platform:
Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings
3 pairs of outward-folding lashing rings
1 pair of flat lashing rings at the front of the loading area
Cut-outs in the outer frame of the loading area for inserting tension straps
Hardwood flooring approx. 48 mm thick, checker plate covering above the axles

Two-part steel ramps:
One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering.
Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg

Landing legs:
JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)

Axles and tires:
BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
Tires 245/70 R 17.5

Braking system:
Todjl Uxdkspfx Ah Ejd
Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit

Steel construction:
Steel construction made from high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)

Paintwork:
First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer
High-quality one-color two-component (2K) top coat in Novagrau
Rear section metallized and painted in RAL 9010 (pure white)
Metallic paint not possible

Electrical system:
Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
Connections conforming to ISO
24N ISO-1185
24S ISO-3731
15-pin ISO-12098

Accessories included:
2" kingpin
One galvanized steel headboard approx. 400 mm high
At the galvanized front connection strip, yellow-red air couplings
4 wheel chocks with holders at the headboard
One spare wheel with holder in front of the headboard
Electro-hydraulic power unit
Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles
Bracket at rear of gooseneck for ALU drive-on ramps
European reflector signs (red-yellow) at trailer rear
White reflective tape according to EU regulations at the sides, at the extension, and red at the rear
At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket
One holder for beacon at trailer rear
Galvanized folding supports under the loading platform chamfer
Ramp operating valves fitted on the right side of the trailer
Cover plates to bridge the gap between ramps and loading platform
One mudflap at trailer rear
Manual and description on USB stick
Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard
On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm
The rear galvanized stakes are removable, superstructure length approx. 2,560 mm
One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap
4 pairs of WADER container pockets in the loading area for a

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.