Polpriklopnik z nizko nakladalno ploščadjo

Faymonville 4-1+3-Achs-Tele-Semi-Radmulden-Rampen-zg

For every used semi-trailer, you will receive a current and comprehensive inspection and functional report.

Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long
- Gooseneck rear with chamfer, approx. 1,000 mm x 10°

Loading platform:
- Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10°
- A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick
- Pneumatic locking with conical locking bolts and reinforced locking positions
- Hardwood surface on the chamfer of the loading platform

Ramps:
- 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with hardwood inlay
- Hydraulically foldable ramp tips
- Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp

Axles and Suspension:
- BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension
- Tyres 235/75 R 17.5
- TPMS tyre monitoring system
- TPMS tyre pressure sensors
Bcsdpjypb Akefx Af Aew

Included Accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3kW electro-hydraulic unit for hydraulic operations
- 1 spare wheel
- Outer beams on the gooseneck with fixing holes for bolted lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear of the gooseneck
- On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
- On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized
- 2" kingpin
- Round NATO socket at the front connection bar
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front crossmember
- 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards
- Extendable galvanized outriggers, approx. 230 mm per side
- Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm
- ALU covers for the wheel recesses
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- Widenable U-profiles for inserting the ALU covers
- Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- 1 pair of mechanical rear supports
- Remote steering control from both front and rear by cable remote control, with axle single-track alignment control
- 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535
- Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame
- Central lubrication system with 1 pump, BEKAMAX
- Radio remote control for steering in addition to cable remote
- Wabco Smart Board system
- 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.