Faymonville 3-Achs-Semi-Ladeboden-Rampen-Gitterrost nakup rabljenega (47.103)

Stanje: rabljeno, lastna masa: 11.300 kg, največja dovoljena obremenitev: 38.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 12/2025, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Labod: -Labod v obliki gosiče, zasnovan za optimalno dolžino tovorne površine, dolžina približno 3.700 mm, zadnji del s poševnostjo približno 1.000 mm x 6° -Za vlečne kompozicije: 4 x 2 in 6 x 2 Tovor na površina v izvlečni izvedbi: -Tovor na površina, dolžina približno 9.600 mm s poševnostjo na zadnjem delu približno 900 mm x 6° -Tovor na površina, ki se po labodu hidravlično dviga in spušča -Dolžina približno 3.000 mm, nosilnost do približno 9.000 kg Rampe: -En par dvodelnih jeklenih ramp AXS, dolžina približno 4.675 mm in širina približno 900 mm -Rešetkast zaključek -Rampe se posamično hidravlično premikajo približno 235 mm navzven in približno 365 mm navznoter -Rešetkast zaključek in jeklena pločevina približno 5 mm, dodatna ojačitev na poševnosti tovorne površine Osi in pnevmatike: -Osi in vzmetenje BPW, 1. in 2. os fiksna, 3. os s krmilnim mehanizmom -3. os s elektromagnetno blokado pri vožnji nazaj, aktivacija preko vzvratne prestave in ročno -Tehnična obremenitev osi: 12.000 kg -Zračno vzmetenje z ventilom za dvig in spuščanje -235/75 R 17.5 3PMSF, dvojne pnevmatike -Senzorji za nadzor tlaka v pnevmatikah TPMS v vseh kolesih, vključno z rezervnim kolesom Dodatna oprema, ki je vključena: -Sprednja stena iz jekla, ki se vstavi, približno 400 mm visoka -Na labodu en par vstavljivih aluminijastih stranskih stranic, približno 400 mm visoke, eloksirane -4 klini za zaviranje -Elektrohidravlična agregat 3 kW za upravljanje hidravličnih funkcij, razen hidravličnih vitlov -Zunanji nosilci laboda z luknjami za pritrditev vijakov za zaporne obroče -Prva luknja približno 200 mm od sprednjega dela, nato približno vsakih 400 mm -2 para vijakov za zaporne obroče, vključno -1 par vijakov za zaporne obroče, vključno -3 pari vtičnih zapornih obročev na notranji strani zunanjega nosilca laboda -3 pari vtičnih zapornih obročev na sredini laboda -1 par vtičnih zapornih obročev zadaj na sredini laboda -Na labodu in zadnji poševnosti rešetkast zaključek z 5 mm jekleno ojačitvijo -2" kraljevski zatič -Vodilna plošča laboda za sedelno ploščo, približno 500 mm široka -Okrogla vtičnica NATO na priključni plošči spredaj -Električni vitel, približno 5.400 kg vlečne sile, z brezžičnim daljinskim upravljalnikom -Jeklena vrvica dolžine približno 24 m, premer vrvice približno 9,5 mm, vključno z objemko za pritrditev vrvice -Lakiran pesek na zunanjih nosilcih laboda Crsdpfxozxz Nbs Ai Eeg -Mehanske podpore za sedelno prikolico z 2-stopenjsko prestavo in ročico -JOST Modul B - statična preizkusna obremenitev = 50.000 kg -Neprekinjen rešetkast zaključek z 5 mm jekleno podlago, dodatna ojačitev, primeren za točkovno obremenitev: -na dvižni plošči -na tovor ni površini -Lakiran pesek -1 rezervno kolo -Odprtine v zunanjem okvirju tovor ne površine in dvižne plošče za obešanje zategovalnih trakov -11 parov vtičnih zapornih obročev, ki ležijo v zunanjem okvirju tovor ne površine, možnost nagibanja navzven: -3 pari v zunanjem okvirju dvižne plošče -8 parov v zunanjem okvirju tovor ne površine -11 parov vtičnih zapornih obročev vzdolž centralnega nosilca: -3 pari na dvižni plošči -8 parov v zadnjem delu tovor ne površine - 1 par nagibnih mehanskih zadnjih opor, upravljanje z eno roko -Centralni sistem za mazanje z 1 črpalko, znamke BEKAMAX, z normalno maščobo po standardu NLGI-2, brez priključka na rampe -WABCO pametni nadzorni sistem -1. os s pomočjo pri speljevanju -En vzvraten žaromet na levi in desni strani zadnjega dela vozila -4 opozorilne table, približno 423 x 423 mm, izvlečna za pr

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) Cjdotvfkfjpfx Ai Esrg - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) Crsdpfsuadk Nox Ai Eeg - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 12.700 kg, največja dovoljena obremenitev: 45.800 kg, skupna masa: 58.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 855 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: siv, Oprema: ABS, Labod, fiksna izvedba, z dvojno cevjo: -Sprednji vogali 90° -Zaprt zunanji okvir z izrezi za zategovalne trakove -Letev za aluminijaste nagibne rampe -2" kraljevi zatič -Mehansko upravljane BPW priključne opore na desni strani v smeri vožnje -550 mm dolg, 8° nagnjen konec laboda -3 pari zategovalnih obročev LC 5.000 daN, vgrajenih v površino tovornega prostora laboda -2 para žepov za vzdružnike 100 x 50 mm v tovornega prostoru laboda Izvlečna tovorna površina z dvema pogrebnima prostoroma za kolesa: -Zaprt zunanji okvir z izrezi za zategovalne trakove -Fiksni sprednji del 360 mm -Talna obloga iz pločevine z nedrsečo površino -Pograben prostor za bager vključno z ozkimi reži za pritrditev tovor -1 par fiksno nameščenih pogrebnih prostorov za kolesa pred prvo osjo, 390 mm globok vključno z lestvicami za vzpenjanje na nagibu -1 par fiksno nameščenih pogrebnih prostorov za kolesa med prvo in drugo osjo, 390 mm globok, vključno z lestvicami za vzpenjanje na nagibu -Tehnično maksimalna dolžina izvoza 3.340 mm -Aluminijasta pokrovnica za pogrebni prostor za kolesa „Premium“, polna širina 600 mm, razširljiva na 3.000 mm z 8 t obremenitvijo na os -Različne globine pogrebnih prostorov za kolesa z uporabo pokrovnice za pogrebni prostor za kolesa (globina cca: 390 mm in 260 mm) -Nagnjeno zadnje vozilo 8°, dolžina 550 mm -Izvedba z drsnikom za enostavo namestitve in odstranitve ramp -Mehanske, vzmetno podprte udobne opore za podporne noge na zadnji strani vozila za oporo med nalaganjem -Ščitniki za umazanijo na zadnji strani -1 par pritrdilnih točk LC 10.000 daN na sredini tovorne površine za labodom -1 par pritrdilnih točk LC 10.000 daN na sredini na začetku tovorne površine -1 par pritrdilnih točk LC 10.000 daN na sredini na zadnji strani tovorne površine -7 parov pritrdilnih točk LC 10.000 daN na zunanjem okvirju tovorne površine -5 parov žepov za vzdružnike 100 x 50 mm na zunanjem okvirju tovorne površine Rampe, 2-delne: -DxŠ 4.300 mm x 800 mm -Nosilnost 38 t; talna obloga iz smreke -Integrirana mehanska zapora v cilindru za dvig rampe za pritrditev rampe v transportnem položaju -Upravljanje rampe: dvižni mehanizem in premik hidravlični -Standardna ročna upravljalna enota za zadnjo funkcijo (rampe, podpora, premik) -Daljinski upravljalnik za upravljanje zadnjih funkcij -Elektro-hidravlična agregat za upravljanje rampe Štiriosna podvozja in pnevmatike: -Proizvajalec osi BPW ECO Max, na zrak vzmeten -Dvojne pnevmatike 245/70 R17.5 z 12 t obremenitvijo na os -Sistem za nadzor tlaka v pnevmatikah (TPMS) z senzorji tlaka v pnevmatikah, nameščenimi na platišču -3 osi z hidravličnim prisilnim krmiljenjem Goldhofer in 1 fiksna os -Zavorna sistem proizvajalca Knorr (v skladu z uredbami EU s sistemom EBS-E) -TIM G2 od Knorr (modul informacij o prikolici) Codpfszt Ic Rex Ai Eerg -Sistem za nadzor stabilnosti vozila RSS (Roll Stability Support) -Standardna druga višina tovorne površine na 895 mm (-100/+100) -Upravljanje zadnjega krmiljenja z daljinskim upravljalnikom -Vključno z enosledno funkcijo -Osnica s samodejnim dvigom, odvisno od obremenitve, na prvi osi vključno s pomočjo pri vožnji Dodatna oprema vključena: -Sprednja stena vključno s parkirnim položajem za zadnjo steno, 400 mm visoka -Aluminijaste stranske stene cca. 400 mm visoke, sestavljene iz 2x stranske stene, dolžina cca. 3.150 mm in zadnja stranska stena z vzdružniki (pocinkana) -Nosilec za rezervno kolo na labodu, vključno z rezervnim kolesom -2 para klinih za podpiranje vključno z nosilcem -Palice za razširit

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Cjdpfxsk Aht Ue Ai Eerg Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) Crodpfewviwkjx Ai Eog - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Crodpfxohlz S Ne Ai Esg Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, lastna masa: 11.950 kg, največja dovoljena obremenitev: 37.550 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-piece steel ramps: - One pair of galvanized two-piece steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of externally foldable lashing rings - 3 pairs of externally foldable lashing rings - 1 pair of flat lashing rings at the front of the loading area - Approx. 48 mm thick hardwood flooring; tread plate surface above the axles Axles and wheels: - BPW axles and suspension; two axles fixed, one self-steering axle - Air suspension with raise/lower valve - Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually - Tyres: 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tyre pressure monitoring system in accordance with ECE R 141 - 2" kingpin - One galvanized steel bulkhead - Yellow-red air couplings at the galvanized front connector rail - 4 wheel chocks with holders - Recess at the rear of the gooseneck for ALU access ramps - 3 heights of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - A holder for a revolving beacon at the rear of the trailer - Height-adjustable tarpaulin structure (3,960 mm) - Galvanized front wall with a tensioning mechanism for the sliding curtain - Height adjustment possible by approx. 400 mm Credpfxsy Drdce Ai Esg - "EDSCHA" branded roof, forward-slidable on aluminum roof beam profiles, bolted to front and rear walls - 3 pairs of sliding stanchions on the loading area - Structure hydraulically extendable at the rear by approx. 750 mm to the left and right - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm length reserve, tension belts spaced approx. 600 mm apart - Height to top edge of structure approx. 3,960 mm - Driving with an open sliding roof is not permitted and will lead to damage of the tarpaulin - Cover plates to bridge the gap between ramps and loading platform - Electro-hydraulic unit at the rear, under the loading platform - At the gooseneck and ramps, left and right respectively, one holder for warning signs including socket - European reflective signs (red-yellow) at the rear of the trailer - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - Lifting axle at the front axle with control via TEBS E depending on current axle load and loading condition - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in the direction of travel, between the axles - Painted sand layer on tread plates on the gooseneck and loading platform as anti-slip protection - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm - Axle load gauge including load diagram - HRM (High Resistance Metallisation) metallization of the outer frame - Entire steel structure shot-blasted, then all defined visible surfaces hot-finished in metallisation with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Cjdpfjya E A Nex Ai Ejrg Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches Crodpfsrvw U Sjx Ai Eog • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve Codpfeuqlmnsx Ai Eerg - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: rabljeno, lastna masa: 11.880 kg, največja dovoljena obremenitev: 49.920 kg, konfiguracija osi: 3 osi, prva registracija: 05/2026, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Vratni del (»swan neck«): - Vratni del z zadnjim naklonom približno 750 mm x 10° - 3 pari pritrdilnih obročev (nosilnost 5.000 daN) - Obloga iz trdega lesa, debeline 30 mm Nosilna ploščad: - Nosilna ploščad v izvlečni izvedbi z zadnjim naklonom približno 1.000 mm x 8° - 5 parov pritrdilnih obročev, ki se odklopijo navzven (nosilnost 5.000 daN) - 3 pari pritrdilnih obročev, ki se odklopijo navzven (nosilnost 10.000 daN) - 1 par pritrdilnih obročev, nameščenih vodoravno na sprednji strani nosilne ploščadi (nosilnost 10.000 daN) - Odprtine na zunanjem okvirju nosilne ploščadi za pritrditev zateznih pasov (nosilnost 2.000 daN) - Obloga iz trdega lesa, debeline približno 48 mm, nad osmi je obloga iz profilirane pločevine Rampe: - En par pocinkanih, dvodelnih jeklenih ramp, približno 2.750 + 1.400 x 800 mm, z oblogo iz trdega lesa, debeline približno 48 mm - Rampa z hidravlično dvižnimi in zložljivimi deli rampe, hidravličnim dvigalom in hidravlično premikalnim mehanizmom - Največja obremenitev na par: 40.000 kg Podporni noge: - JOST podpirne noge (mehanske) z 2-stopenjskim menjalnikom za dvigovno silo 24 t (testna obremenitev 50 t) Osi in pnevmatike: - BPW osi, dve osi fiksni, dve osi krmilni - Z zračno vzmetjo, z bobnastimi zavorami, z funkcijo dvigovanja/spuščanja - Krmilne osi s elektromagnetno blokado pri vzvratni vožnji, ki se aktivira s prestavo za vzvratno vožnjo ali ročno - Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu s standardom ECE R 141 - Pnevmatike 235/75 R17.5 Barvanje: - Peskanje s korundom za optimalno oprijemljivost prevlečnega sistema - HRM metalizacija celotnega šasija vozila z ZINACOR 850 (85 % cink/15 % aluminij) - Končni premaz z 2 slojema 2K lakom, enobarvno v barvi DB 7350 Novograu Dodatna oprema: - Na vratnem delu in na zadnji strani, levo in desno, po en nosilec za opozorilne table, vključno z vtičnico - En rezervni zagon z nosilcem - 2" kraljevska glava (King Pin) - En pocinkani jekleni sprednji panel, visok približno 400 mm - Na pocinkani priključni letev spredaj, rumeno-rdeče zračne sklopke - 4 podložni klini z nosilcem - Pocinkani, zložljivi podporni noge pod naklonom nosilne ploščadi - En nosilec za krožno luč na zadnji strani prikolice - Pokrovne plošče za zapiranje prostora med rampami in nosilno ploščadjo - Bela odsevna trak v skladu z evropskimi predpisi, bočno in na izvlečni plošči, zadaj rdeč - Elektro-hidravlična agregat zadaj, pod nosilno ploščadjo - Upravljalni ventili za rampe, nameščeni na desni strani prikolice - En odbijač na zadnji strani - Evropske odsevne table (rdeče-rumene) na zadnji strani prikolice - Navodila in opis na USB pomnilniku - Štiri opozorilne table, ki se iztegnejo za približno 400 mm, približno 423 x 423 mm z pozicijsko lučjo - Na vratnem delu lahko pritrdite ALU stranske in zadnje stene, približno 2.440 x 400 mm - Zadnje, pocinkane priključne lege so odstranljive (dolžina nadstavka približno 2.560 mm) - 4 pari WADER stranskih vreč na nosilni ploščadi za 1x 20-stopalni, 2x 20-stopalni ali 1x 40-stopalni kontejner - 7 parov stranskih vreč za priključne lege 100 x 50 mm na zunanjem okvirju nosilne ploščadi - Razširitve, pocinkane, iztegljive za približno 230 mm na vsaki strani - Dvigni os na sprednji osi, upravljanje preko TEBS-E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenjenosti - Kvadratne lestve 20 x 20 mm, v razmiku 200 mm, na zunanjem okvirju naklona nosilne ploščadi Crodpfx Aiezp Ntvo Eeg - Na profiliranih pločevinah na vratnem delu in na nosilni ploščadi nanesen

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm - Gooseneck height 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward, punch-hole design - Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable - Step 80x80 mm in the frame before and after the division - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended rear plate - Drop leg supports at the rear Ramps: - 2 single-piece aluminum ramps, special version with spring-assisted lifting - Length x width approx. 2,500 mm x 600 mm - Lockable in transit position with lashing straps - Manually adjustable sideways Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with a total lift of approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tyre pressure monitoring included Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing gear with single-side operation and compensating support Paintwork: - Steel grit-blasted, spray-galvanized chassis and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey - Reflective side and rear stripes in yellow Accessories: - Plug-in side and rear panels on gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks with holders - Elongated license plate holder in rear plate - 1 ECE panel at the rear, plug-in - 11 pairs ZK modules 10t, side-mounted: Codpfxoxnym Dj Ai Ejrg - 2x on gooseneck - 2x on loading platform before extension - 7x after extension - Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm - 4 holders for warning signs, plug-in to stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes - 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted to underrun protection

Stanje: novo, lastna masa: 11.800 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: siv, Oprema: ABS, Labuž s sredinsko cevjo, tog: -Sprednji vogali 90° -Zaprt zunanji okvir z izrezi za napenjalne trakove -Perforirana letvica za alu-nakladalne rampe -2" kraljevski zatič -BPW mehansko upravljani podporni stebri, desno v smeri vožnje -550 mm dolg, 8° zožen konec labuža -3 pari vgrajenih pritrdilnih obročev v nakladalni površini labuža, 2 para žepov za kole v velikosti 100 x 50 mm v labužu Nakladalna površina: -Zaprt zunanji okvir z izrezi za napenjalne trakove -Fiksni sprednji del 360 mm -Talna obloga iz pločevine z nedrsečo prevleko -Izrez za bagersko roko z vzdolžnimi odprtinami za pritrditev tovora -1 par fiksnih vdolbin za kolesa pred prvo osjo, globina 390 mm, vključno z lestvami za vzpon v poševnini -1 par fiksnih vdolbin za kolesa med prvo in drugo osjo, globina 390 mm, vključno z lestvami za vzpon v poševnini -Maksimalno tehnično izvlečenje 3.740 mm -Aluminijasti pokrovi za vdolbine za kolesa "Premium", širina 600 mm, razširljivo na 3.000 mm, nosilnost koles do 8 t -Različne globine vdolbin glede na uporabo pokrova (ca. 390 mm in 260 mm globine) -Zaobljen zadnji del vozila 8°, dolžine 550 mm -Izvedba s sani za enostavno montažo/demontažo ramp -Mehanske, vzmetno podprte komfortne padajoče podpore na zadku za podporo ob nakladanju -Preko celotne širine montiran blatnik na zadku -1 par pritrdilnih točk LC 10.000 daN sredi začetka nakladalne površine -1 par pritrdilnih točk LC 10.000 daN sredi zadnjega dela nakladalne površine -7 parov pritrdilnih točk LC 10.000 daN v zunanjem okviru nakladalne površine 3-osno podvozje: -BPW ECO Max osi, zračno vzmetene -Dvojne pnevmatike 245/70 R17.5 z 12 t nosilnosti na os -Sistem za nadzor tlaka v pnevmatikah (RDKS) s senzorji na platiščih -2x os s hidravličnim prisilnim krmiljenjem, 1x toga os -Zavorni sistem tipa Knorr (po EU predpisih z EBS-E) -TIM G2 by Knorr (TrailerInformationModul) -Stabilizacija vozila RSS (Roll Stability Support) -Privzeto druga nakladalna višina 895 mm (-100/+100) -Upravljanje prisilnega krmiljenja prek radijskega daljinca ali gumba na labužu, vključno z enostavno usmeritvijo -Obremenitveno odvisna dvižna os na prvi osi z asistentom za speljevanje (možno prisilno spušanje osi prek TIM) Crsdpozdzunjfx Ai Ejg Rampi, dvodelni: -DxŠ 4.300 x 800 mm -Nosilnost 38 t; lesen pod iz macesna -Vgrajena mehanska ključavnica v cilindru dvigala za varnostni transport položaj -Upravljanje rampe: dviganje in premikanje hidravlično -Radijski daljinec za upravljanje krmiljenja se lahko uporablja tudi za upravljanje zadnjih funkcij -Elektro-hidravlična enota za upravljanje ramp Vključen dodatni pribor: -Sprednja stena z odlagalnim mestom za zadnjo steno, višina ca. 400 mm -Nosilec rezervnega kolesa, navpičen na sprednjem delu labuža, vključuje rezervno kolo (nesestavljeno) -Zagozde za kolesa z nosilcem -Razširitveni nosilci za širino do 3.000 mm -Aluminijaste vtične stene 400 mm visoke, 2x stranska stena dolžine ca. 3.150 mm in zadnja stena z vložki (pocinkana) -2 para opozorilnih tabel 423 mm x 423 mm s 2 pozicijskima lučema in mestom za rotacijsko luč -Ena vtična zaščitna plošča na koncu bagerske vdolbine -Traffideckgo gumijasta prevleka, višina 8 mm na zunanji strani nakladalne površine vključno z zadnjo poševnino, brez sprednjega fiksnega dela, s peskom -Stranske lestve na zadnji poševnini -Rdeča obrisna oznaka na zadku -Bela stranska obrisna oznaka -Centralno mazalni sistem (krmiljenje in podvozje)

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Cedpjxnnk Dsfx Ai Eorg Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket Codpoup U Hzofx Ai Esrg - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: rabljeno, lastna masa: 13.870 kg, največja dovoljena obremenitev: 55.930 kg, skupna masa: 69.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 88.000 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, Leto izdelave: 2026, Oprema: ABS, Labod: -Labod v obliki "swan neck" za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm -Zadnji del laboda s poševnostjo približno 1.000 mm x 10° Crodpfszx Aa Ujx Ai Eeg -Dovoljena masa na sedelni prikolici: 25.000 kg -Primerno za vlečna vozila: 4 x 2, 6 x 2 in 6 x 4 Tovor: -Tovor v izvlečni izvedbi, dolžina približno 8.800 mm, s poševnostjo na zadnji strani približno 500 mm x 10° -Nosilec za vedro bagra, približno 2.490 x 750 x 210/290 mm Rampe: -Par dvodelnih jeklenih ramp, približno 4.350 mm x 900 mm, obloga iz trdega lesa -Rampe se posamično hidravlično premikajo približno 235 mm navzven in približno 215 mm navznoter -Obloga iz trdega lesa na poševnem delu tovornega prostora -Pripadajoči profili za oprijem 20 x 30 mm, približno vsakih 200 mm na zunanjem okvirju rampe Osi, vzmetenje in pnevmatike: -Osi in vzmetenje BPW, 1. in 2. os sta fiksni, 3. in 4. os sta usmerjeni -Dovoljena masa na os: 12.000 kg -Zračno vzmetenje z ventilom za dvigovanje in spuščanje -Pnevmatike: 235/75 R17.5 -Senzorji za nadzor tlaka v pnevmatikah (TPMS) v vseh kolesih, vključno z rezervnim kolesom Dodatna oprema (vključena): -Sprednja stena iz jekla, vstavljiva, višina približno 400 mm -Okrogla vtičnica NATO na priključni letev spredaj -Elektrohidravlična agregat 3 kW -1 rezervno kolo -Prva luknja približno 200 mm od spredaj, nato približno vsakih 400 mm -2 para vijačnih pritrdilnih obročev, vključno -1 par vijačnih pritrdilnih obročev -Na labodu 1 par vstavljivih aluminijastih stranskih desek, približno 400 mm visoke, eloksirane -Na labodu 1 vstavljiva aluminijasta zadnja stena, približno 400 mm visoka, eloksirana -2-palčni kraljevi člen (kingpin) -Vodila od laboda za sedelno ploščo, širina približno 500 mm -4 podstavki za kolesa -Mehanske podpore za sedelno prikolico z 2-stopenjskim menjalnikom in ročico, model JOST B – statična testna obremenitev = 50.000 kg -Na tovoru neprekinjena obloga iz trdega lesa, debeline približno 50 mm, ki je med osmi prekinjena -Zaklepanje tovornega prostora s stožčasto privarjenimi profili za pritrditev vsakih 250 mm, vključno z napenjalno ploščo -Podolžne luknje za pritrditev in premikanje prečnih elementov na sprednji strani tovornega prostora -1 medtabelna plošča z izvlečnim tovorom, širina približno 300 mm, za cev z velikim prečnim prerezom, z oblogo iz jeklene pločevine -Spredaj in zadaj podolžne luknje za pritrditev in premikanje prečnih elementov -Odstranljiva pokrovnica, na isti višini kot tovor -1 par pritrdilnih obročev na prečni nosilec spredaj -6 parov potopljenih pritrdilnih obročev na zunanjem okvirju tovornega prostora, odklapljajo se navzven -Dodatno 1 par pritrdilnih obročev zunaj na sprednjem prečnem nosilcu tovornega prostora, približno 90° usmerjeno navznoter proti tovoru -Razširitve (pocinkane), izvlečne za približno 230 mm na vsaki strani -1 par fiksno vgrajenih niš za kolesa, odprtih do izvleka, približno 700 x 410 mm, na tovoru pred 1. osjo -Niša za kolo z oblogo iz jeklene pločevine in profili za oprijem 15x15mm, približno vsakih 200 mm -Med 2. in 3. osjo na tovoru par fiksno vgrajenih niš za kolesa, približno 1.695 x 700 x 410 mm -Pokrov za niše za kolesa -1 par mehanskih zadnjih opornih nog -Centralni sistem za mazanje z 1 črpalko -Pocinkani podstavki za izvlečne razširitve v nišah za kolesa, za razširitev pokrovnic niš za kolesa -Pripadajoči profili za oprijem 20 x 30 mm, približno vsakih 200 mm na zunanjem okvirju poševnine tovornega prostora -Sistem WABCO Smartboard -1. os z avtomatsko funkcijo dviga

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished Cjdpsunrapjfx Ai Esrg

Stanje: rabljeno, lastna masa: 10.350 kg, največja dovoljena obremenitev: 37.650 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: oranžna, Leto izdelave: 2018, obratovalna teža: 10.350 kg, Oprema: ABS, Za vsak rabljen prikolico prejmete aktualno in celovito poročilo o pregledu in funkcionalnosti. Gosi vrat: -Gosi vrat s poševnimi robovi spredaj 45° in s poševnostjo zadaj približno 750 mm x 10° -2 para zank za pritrditev tovora (nosilnost 5.000 daN) -Prevleka iz trdega lesa, debeline 30 mm Ploščad, ki se razširi: -Ploščad, ki se razširi, s poševnostjo zadaj približno 1.000 mm x 8° -5 parov zank za pritrditev tovora, ki se odklopijo navzven (nosilnost 5.000 daN) -3 pari zank za pritrditev tovora, ki se odklopijo navzven (nosilnost 10.000 daN) -1 par zank za pritrditev tovora, nameščenih vodoravno spredaj na ploščadi (nosilnost 10.000 daN) -Odprtine v zunanjem okvirju ploščadi za pritrditev elastičnih trakov (nosilnost 2.000 daN) -Prevleka iz trdega lesa, debeline približno 48 mm Osi in pnevmatike: -Osi in vzmetenje SAF, 2 osi fiksni, 1 os vodilna -Teža na os: 10.000 kg -Elektromagnetno zapornilo za vožnjo nazaj, aktivira se s prestavo za vožnjo nazaj in ročno -Zračno vzmetenje z ventilom za dvigovanje in spuščanje -245/70 R 17,5 Zavorna naprava: -Zavorna naprava v skladu z evropskimi predpisi z EBS-E (2S2M) Barvanje: -Izjemna in dolgotrajna zaščita proti koroziji standardno obdelanega jeklenega okvirja, zagotovljena z dvokomponentno (2K) podlago s cinkovim prahom -Kakovostno dvokomponentno (2K) nadlakiranje, enobarvno v barvi RAL 2004, čist oranžna Dodatna oprema (vključeno): -2-palčni kraljevski vijak -Pocinkana jeklena čelna stena, približno 400 mm visoka -ALU bočne stene in zadnja stena, ki se pritrdijo na gosi vrat, približno 2.440 x 400 mm -Zadnje bočne stene so odstranljive -Rezervna pnevmatika z nosilcem -4 podstavki z nosilcem na čelni steni -Nerjaveča jeklena orodjarna škatla 1.350x400x400 mm na gosi vratu -10 bočnih stenic, dolžine 1.000 mm -Nosilec za največ 7 parov bočnih stenic, približno 100 x 50 mm, na notranji strani čelne stene, pritrjen z vijaki -Pocinkani nosilec za bočne stene, ki se uporabljajo pri prevozih nad standardno širino, na desni in levi strani -Dvignjena os na prednji osi, upravljanje preko TEBS E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenjenosti -Nosilec za rotacijsko signalno luč na zadnjem delu prikolice -Nosilec na zadnjem delu gosi vrata za ALU priklopne rampe -Pocinkani podstavki pod poševnostjo ploščadi -Bela odsevna trak, v skladu z evropskimi predpisi, na boku, na iztegu in rdeč zadaj -Rumeno-rdeči zračni priključki na pocinkani priključni letvi spredaj Csdjvpigtjpfx Ai Ejrg -Na gosi vratu in zadnji plošči, na levi in desni strani, nosilec za opozorilne table s priključkom -Dve odsevni tabli, iztegljivi za približno 400 mm, približno 423 x 423 mm, z pozicijsko lučjo -6 parov želeti za bočne stene, približno 100x50 mm v zunanjem okvirju ploščadi -Podaljški, pocinkani, iztegljivi za približno 230 mm na vsaki strani -Drseča letva za pritrditev ALU priklopnih ramp zadaj na vozilu -Centralna mazalna naprava BEKAMAX (Pico) z običajno maščobo NLGI-2 in odstranljivim zaščitnim pokrovom okoli črpalke -Na opozorilnih tablah nosilec za rotacijsko signalno luč -Evropske odsevne table (rdeče-rumene) na zadnjem delu prikolice -Nalepka s hitrostjo 80 km/h zadaj in na obeh straneh -Manometer za obremenitev za ugotavljanje obremenitve osi, vključno z diagramom obremenitve -Dve odklopni ECE tabli -HRM metalizacija (metalizacija z visoko odpornostjo) zunanjega okvirja -Celotna jeklena konstrukcija, peskana, nato pa so določena vidna površja prevlečena z metalizacijo s cinkom 85% - aluminij 15% z metodo vročeg

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS Crsdpfx Aiowu A Slj Eog - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. Csdpjl Uxdkjfx Ai Eerg 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: rabljeno, prva registracija: 08/1998, skupna dolžina: 16.000 mm, skupna širina: 2.550 mm, Leto izdelave: 1998, GOLDHOFER STZ -TL 3 -33/80 3-osna polprikolica z upognjenim (labodjim vratom) SEMI, s 3 krmiljenimi osmi, z znižljivo ploščadjo in hidravličnimi rampami PRIKOLICA JE BILA PESPESKANA IN LAKIRANA!! Credswpknwopfx Ai Eog • ABS • 3 x BPW ECO-Plus osi z zračnim vzmetenjem • 3 x krmiljene osi • Dvižno/spustno napravo • Hidravlične, dvodelne vzponske rampe • Hidravlično znižljiva ploščad • Razširljivo na 3 m širine • Opozorilne table • NATO vtikač za električno/hidravlično črpalko • Skupna dolžina: 16.000 mm • Lastna masa: 15.900 kg • Dovoljeno skupno maso: 48.000 kg (tehnično možno 48.000 kg) • Nosilnost: 32.100 kg • 4 x merilniki obremenitve osi • Dvojna pnevmatika: 235/75 R17,5 - Tehnični pregled in varnostni pregled: !! novo !! - Nemško vozilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm - Frame neck 200 mm with chamfered corners at the front - Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed to the outside and designed as perforated outer frame - Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically - Frame with 80x80 mm step at and after extension joint - Reinforced frame design / maximum point load when retracted at center of gravity - Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame) - With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end - 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended rear plate - Drop-down supports at the rear Ramps: - 2 two-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit) - Width approx. 800 mm - Wooden surfacing - Including anti-slip strips on ramps - Can be locked in transport position with tie-down straps - Operated by control lever mounted on rear right in frame - Hydraulically laterally adjustable Floor: - 35 mm larch wood floor with aluminium omega profiles Landing legs: - Mechanical 24-ton landing legs with single-sided operation and compensating device Axles, steering and tires: - BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters Cjdpexgm S Dofx Ai Ejrg - Lifting and lowering system with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset by center bore - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Insertable side and rear stakeboards on the swan neck, approx. 400 mm high - Spare wheel carrier - Side aluminium underrun protection - 4 chocks - 1 plug-in ECE rear warning board - 11 pairs of ZK modules 10t, lateral: - 2x on the swan neck - 2x on loading area before extension - 7x after extension - Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width - 4 plug-in sockets for warning signs in stake pockets on the loading platform - 6 pairs of stake pockets laterally for 100x50 mm stakes - 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions) - 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Csdpfx Aisk Ahugo Esrg Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Csdpfx Aewu Agiji Ejrg Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection