Polpriklopnik z nizkim nakladalnikom

Faymonville MAX Trailer 3-Achs-Tele-Semi-nachlaufg.

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2025, Oprema: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system including radio remote control * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * Outboard main frame * Hydraulic steering * Comprehensive load securing package * Low-bed length: 11,750mm (6,100mm + 5,650mm) or 12,400mm (6,700mm + 5,700mm) * Unladen weight: 13,700kg (+/- 2%) * Optional comprehensive equipment This trailer is available with a low-bed length of 6,700mm or 6,100mm and with short delivery times. Images may differ from the original. All information subject to change and without guarantee. Contact: Tel.: Laodpfjgvr T Hex Ab Uok

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high Ledpjk Af Svsfx Ab Uoak - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area Ledpfxoiu Er Ao Ab Ueak - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: rabljeno, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2025, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 12.900 kg, Oprema: ABS, You will receive a current and complete inspection and functionality report with each used semi-trailer. Neck: - SNT-designed gooseneck to optimize loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical kingpin load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Lowbed with external beams in extendable "SUPER LOW" design, approx. 6,850 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking - 5 pairs of lashing rings foldable outwards (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Rear Chassis: - Rear chassis with a closed outer frame, checker plate covering, and continuous prismatic excavator recess approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards (LC 10,000 daN) - 1 pair of horizontal lashing rings in the recess (LC 8,000 daN + 5,300 daN) - 2 pairs of stake pockets for removable stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - "PENDULUM AXLE" – all axles hydromechanically forced-steered - Burst pipe valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and safety locks for securing in the lifted position - Axles finished with 2 coats of single-color 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle levelling - 245/70 R 17.5 tires - TPMS tire pressure monitoring system as per ECE R 141 Accessories: - Preparation for mounting bolt-on container locking devices for one 20ft or one 40ft container on the outer beams - 2" king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel - Yellow-red air couplings on the galvanized front connection bar - Four wheel chocks - Radio and cable remote control - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape complying with EU regulations - Two wooden blocks 500 x 250 x 200 mm - European reflector boards (red-yellow) on the rear of the trailer - Gooseneck and rear panel with left and right brackets for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for installing boltable RUD VLBG-4 rings Lodpfswp Dx Ajx Ab Uoak - Separate air connection with air gun on gooseneck - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,560 mm) - 2 pairs of screw-on M20 lashing rings (LC 5,000 daN) - Gooseneck closed at the rear upper section with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Foldable extensions of approx. 230 mm per side - 2 pairs of boltable RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps to bridge the catches of the lowbed - Loading platform has a sand-coated surface as anti-slip protection - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm - Central grease system with 2 pumps - Load manometer for determining axle loads including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (zinc 85% – aluminium 15%)

Stanje: rabljeno, prevoženi kilometri: 9.440 km, moč: 382 kW (519,37 KM), prva registracija: 01/2024, vrsta goriva: dizel, konfiguracija osi: 2 osi, zavore: retarder, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: je imel nesrečo, klimatska naprava, * Engine runs! Lajdpevy R Iyjfx Ab Usk * Multifunction steering wheel * Automatic climate control * Sleeper berth * Cruise control * Hill-start assist * Leaf/air suspension * Hydraulic system * Differential lock -----Internal vehicle number: 10295----Errors and prior sale excepted.

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, * Gigant axles * Air suspension * Self-tracking rear axle * Extendable * Unladen weight: 10,920 kg Lajdewta Diopfx Ab Usk ----Internal vehicle number: 9799----Subject to errors and prior sale.

Stanje: rabljeno, prevoženi kilometri: 440.907 km, moč: 375 kW (509,86 KM), prva registracija: 12/2020, vrsta goriva: dizel, lastna masa: 8.074 kg, največja dovoljena obremenitev: 9.926 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/60 22,5, stanje pnevmatik: 40 odstotek, konfiguracija osi: 4x2, medosna razdalja: 3.600 mm, zavore: retarder, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, število postelj: 1, Leto izdelave: 2020, obratovalne ure: 440.907 h, velikost sprednje pnevmatike: 315/60 22,5, velikost zadnje pnevmatike: 315/60 22,5, Oprema: ABS, centralno zaklepanje, drsna vrata, filter saj, klimatska naprava, meglenke, navigacijski sistem, računalnik na krovu, registracija tovornjaka, spojler, tempomat, zapora diferenciala, Reference number for inquiries: 69097 MAN, 18.510 * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Electric Window Lifters * Automatic Climate Control * Refrigerator Box * Air Suspension * Navigation System * Particulate Filter * Retarder / ZF Intarder * Power Steering * Sleeper Compartment * Stationary Air Conditioning * Cruise Control * Central Locking * On-board Computer * Differential Lock * Low Noise Emission * Long Haul > 7.5t * Digital Tachograph * Radio CD * CB Radio * Bluetooth * Sound System * USB Interface * Adaptive Cruise Control (Distance Assistant) * Lane Departure Warning System * OBU (On-Board Unit) Prepared * Fridge * Electric Windows & Mirrors Laedpfx Ajvtk Ugob Usk * Radio Remote Central Locking * Air Horns * 2x Diesel Tank * AdBlue Tank * Roof Spoiler * Fog Lights * Comfort Suspension Seat * Multifunction Steering Wheel * Sun Visor * Transmission Type: Automatic * Suspension Type: Air/Air * Gross Vehicle Weight: 18,000 kg * Kerb Weight: 8,074 kg * Payload: 9,926 kg * Permitted Total Weight: 18,000 kg * Tyre Condition 1st axle: 30% -- 30% – Tyre Size: 315/60 R22.5 * Tyre Condition 2nd axle: 40%|40% -- 40%|40% – Tyre Size: 315/60 R22.5 * Wheelbase: 3,600 mm * Tyre Size: 315/60 R22.5 * Special Edition Individual * Light Bar * Swivel Seat * Blind Spot Camera * Light Bar * Coffee Machine * Microwave * Inverter * MAN Telematics * Tyre Pressure Monitoring System (TPM) * 2x 480L Diesel Tank * Rain Sensor * Highlight: New Model/Special Edition/Lowliner Disclaimer: Specifications subject to change, prior sale and errors excepted. More pictures and videos available on our website. Our comprehensive service includes, e.g.: * Purchase / Sale / Rental of commercial vehicles * Fast and uncomplicated financing * Handling of all (export) documents * Ordering of export / customs number plates * Vehicle preparation: new tarpaulins, signage, painting etc. * Professional loading / load security * TÜV inspections, registration service * Transfer of commercial vehicles Please feel free to contact our trained specialist staff – we are happy to advise you.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 8.650 h, vrsta goriva: dizel, velikost sprednje pnevmatike: 900/60R42, velikost zadnje pnevmatike: 900/60R42, velikost pnevmatike: 900/60R42, Oprema: kabina, klimatska naprava, pogon na vsa štiri kolesa, powershift menjalnik, računalnik na krovu, zavorni sistem na stisnjen zrak, Tyres (rear): 900/60R42, Tyres (front): 900/60R42, Operating hours: 8,650, Three-point / rear hitch linkage, front weights, wheel weights, beacon, load-sensing additional hydraulic circuit (Power Beyond, load sensing), double-acting hydraulic valves (5x), GPS system (receiver), automatic steering system, pre-installation for automatic steering system, wheel weights, side-mounted front weights, location: customer Lodpfx Aownv N Reb Uoak

Stanje: rabljeno, Leto izdelave: 1981, obratovalne ure: 1.850 h, moč: 51 kW (69,34 KM), naslednji pregled (TÜV): 01/2027, Oprema: kabina, pogon na vsa štiri kolesa, sprednja priključna naprava, Deutz Intrac 2004 A-S Historic registration (H-Kennzeichen) Tractor Only original: 1,850 operating hours First registration: 28.08.1981 TÜV: 03/2027 Gross weight: 5,100 kg Unladen weight: 360 kg Overall dimensions: 4300 mm x 2025 mm x 2764 mm Diesel All-wheel drive 51 kW / 70 HP 3,744 cc 30 km/h Cab Rear hydraulics Front hydraulics Rear PTO 540/1000 Front PTO 1000 Air brake system Triangle coupling front and rear Work lights front and rear Lasdsvh Ez Ropfx Ab Uek 3 double-acting hydraulic control units rear 2 double-acting hydraulic control units front Air-suspended seat Radio 12 forward / 4 reverse gears Heater Service history maintained IMPORTANT !!!!! PLEASE READ !!!!! We expressly reserve the right to prior sale, as we also advertise this item on other platforms. We strongly recommend inspection and testing to avoid any misunderstandings about condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcomed!!! The specified internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers always in stock!!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 10.650 mm, širina tovornega prostora: 3.040 mm, višina nakladalnega prostora: 3.900 mm, Leto izdelave: 2021, Oprema: ABS, Technical data for EBERT TLS 43 ATV Special Low Loader: - Permissible king pin load: 19,000 kg - Permissible axle load: 24,000 kg - Permissible total weight: 43,000 kg - Unladen weight according to DIN: approx. 12,500 kg - Low-bed length, internal: approx. 6,650 mm + 4,000 mm - Axle table length: 2,700 mm - Overall width: 2,550 mm - Loading edge / low bed: approx. 200 mm - 350 mm - Sliding table length: 500 mm - Widening / low bed up to: 3,050 mm - Low-bed extendable by: 4,000 mm - B-dimension: 12,000 mm - Entire vehicle flame-sprayed zinc coated, with epoxy primer and 2K finish paint - Oversize signage front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg? DLS single wheel suspension, hydraulically steered and hydraulically suspended Front high-bed: - Corner doors left and right, accessible from outside - Tool box with lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm - Spare wheel on the high-bed, behind the partition wall on the right - Staircase on the right side for access from the low bed to the front high-bed - Hydraulic coupling for decoupling on the left side, 6-way Multi-Faster coupling - 6 lashing points 3,000 kg version, outside on the high-bed / folding lashing eyes - 2 lashing points 5,000 kg version, on top of the longitudinal beams (rear-facing) Low bed: - Climbing aids on the boom - extension - Low-bed extendable by 4,000 mm, can be locked every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points 10,000 kg version, outside on the outer frame - 24 socket tubes 90x90, evenly distributed for widening the low bed to 3,050 mm - Between the extension tubes, 50 mm hardwood planks are inserted, 10 mm protrusion Rear high-bed: - Front high-bed, sloped and perforated, for retrofitting ramps via galvanized adapters - Ramp mounting profiles (Altec) at the rear – C rails - 6 lashing points 10,000 kg version, outside on the high-bed - 6 lashing points 5,000 kg version, in the excavator trough Lodsfiyvhspfx Ab Usak - 8 lashing points 5,000 kg version, for oversize, outside on the frame - Closure of the excavator trough at front and rear with a wooden floor plate (insertable) Electrics: - Use of NATO spiral cable, power supplied from the tractor vehicle - Rotating beacon, centrally mounted at the rear - LED side marker lights - Standard taillights, vertically mounted (LC5) - Work light on the high-bed for illuminating the low bed - Decoupling: Sensor for safety and pressure switch for suspension Air: - Aluminum air tanks, 60 l (2x 10 l, 2x 20 l) - TEBS modulator - Locking for extension left and right (valve on the side of the rear high bed) - Double release valve Hydraulics: - Hydraulic system on the high-bed for steering, suspension, and detachable gooseneck Accessories: - 2x 4 hardwood planks as supports for the low-bed widening and intermediate table - 2 securing wedges for decoupling - 4 wheel chocks On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will assist you gladly. For further information, please visit our website. Subject to errors and prior sale!