Prikolica delovna ploščad nakup rabljenega (71)

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11-tonne Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tyre pressure monitoring with display option in truck via EBS signal (without truck-side installation) * Warning sign package front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin and additionally 12 V - 7+4-pin power cable * Extended connection cables for agricultural and forestry towing vehicles * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side * Closed single plastic mudguards at the front * Straight steel mudflaps at the rear, each with spray protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring over turntable platform made of 50 mm softwood and in low-loader platform made of 60 mm softwood * Outer planks of the access ramps made of 50 mm bamboo * Four stanchion pockets each side (no stanchions included), each with 2 t lashing option * Load securing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform, 1 pair of 13.4 t lashing rings each side front and rear on the outer frame, 4 pairs of 10 t lashing rings per side, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of 6.4 t lashing rings per side in excavator boom rest, 8 pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored in a side locker on the left * Excavator boom rest over rear axle up to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (incl. 860 mm approach slope) Iodpferczm Dox Ab Uobf * Chassis, turntable, access ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer‘s warranty * Subject to errors and prior sale * Available from week 46 / 2025

Stanje: novo, lastna masa: 614 kg, največja dovoljena obremenitev: 2.886 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.800 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 0,7 m³, barva: srebrn, gradbena višina: 1.970 mm, delovna širina: 1.790 mm, Reverse automatic system, hot-dip galvanization, extremely robust construction, tie-down perforated floor, LED lighting, jockey wheel, bucket holder, * AVAILABLE IMMEDIATELY * extremely robust build / perforated tie-down floor / LED lighting / jockey wheel / bucket holder TECHNICAL DATA: - Brand: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery trailer - Vehicle condition: New - First registration: Without initial registration - TÜV/Inspection: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height (floor): 38 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 614 kg - Payload: 2,886 kg - Chassis: Low loader (wheels beside the platform) - Tyres: 165R13C - Suspension: ALKO rubber spring axle - Jockey wheel: Yes - 100 km/h approval: Optional, retrofittable DESCRIPTION: - Robust steel fenders with anti-slip perforated profile - Reinforced perforated steel plate sides inside - 18mm phenolic plywood centre deck, anti-slip and waterproof - Extremely stable welded steel frame - Frame fully hot-dip galvanized by immersion bath - Chassis with two additional longitudinal beams under the loading platform - Single perforated steel ramps, galvanized, adjustable, L=1.62m - Sturdy ACME locking system: closes silently, loading ramps secured by safety clamp locks, rubber buffers dampen noise - Very low chassis for reduced ramp angle Ijdeu Hrg Uopfx Ab Uebf - Excavator bucket holder - 10x tie-down lashing points on the side wall (1000 daN/kg), TÜV certified - Flexible choice of tie-down points with perforated steel floor - Maintenance-free axles and damping systems designed for extended journeys and heavy loads - Spare wheel easily accessible, mounted on side wall - Reverse automatic system - ALKO overrun hitch and parking brake - Coupling head made of cast steel with integrated high security ALKO lock - Highly stable reinforced V-drawbar - 13-pin plug - Complete LED lighting: extremely bright, durable and reliable - Reversing light - Integrated rear fog light - Robust protection for rear lights - Heavy-duty jockey wheel - 5-year chassis warranty RETROFITTABLE ACCESSORIES (please inquire!): - TracStrap load securing system - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and images are copyright protected!! Over 800 trailers available immediately in stock! We have been your expert dealer & workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years – repairs and nationwide delivery in Germany available for an additional charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Subject to errors, changes, and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 14.170 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2006, dolžina tovornega prostora: 6.530 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna masa: 18.000 kg Lastna masa: 3.830 kg Nosilnost: 14.170 kg Skupna dolžina: 8.550 mm Dolžina nakladanja: 6.530 mm Ibodpfx Aow N A Eyjb Uof Širina: skupna širina 2.550 mm / širina nakladanja 2.540 mm Višina nakladanja: pribl. 1.000 mm Dodatne informacije - Tla iz trdega lesa z Omega profili - Stranske stranice prisotne - Dvojna kolesa - BPW osi - Prstani za privezovanje - LED vzvratne luči

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2024, * PT 30 Profile: * EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function as well as RtR valve * Smart-Board mounted on trailer as information tool (separate axle load indication front and rear) * Tyre pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanised steel sheet skirts with spray protection * Contour marking tape, reflective on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment by means of draw spring & turnbuckle * Tool box, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Accessory box in turntable with folding lid, 2 built-in container locks (immediately behind turntable platform) * ROBOT-welded anti-slip coating on turntable platform steel plate (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on front wall support, front & rear 1 pair UVV lashing rings (13.4 t) as well as 3 pairs each side UVV lashing rings (10 t), swivelling and lowerable, loadable in all directions and recessed in outer frame, each side 3 stanchion pockets with simultaneous 2 t lashing capacity * 6 pairs mechanical folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stored in the centre of the load area * Hydraulic one-piece ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways Ibodpjtplwiefx Ab Usf * 4-way control block for later retrofitting of hydraulic ramp shifting * Chassis, turntable, folding outriggers, drop supports and approach ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted in a shade of black * Loading edge height (laden): approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, lastna masa: 705 kg, največja dovoljena obremenitev: 1.995 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.940 mm, širina tovornega prostora: 1.870 mm, višina nakladalnega prostora: 100 mm, prostornina tovornega prostora: 0,7 m³, barva: srebrn, gradbena višina: 800 mm, delovna širina: 2.540 mm, Lowerable loading platform / manual hydraulic system / braked, reverse automatic device, hot-dip galvanized, * IMMEDIATE AVAILABILITY * incl. lowerable loading platform / manual hydraulic system / braked Technical Data: - Type: New vehicle - Technical inspection (TÜV): New/2 years - Availability: IMMEDIATE! - Permissible total weight: 2,700 kg - Unladen weight: 705 kg - Payload: 1,995 kg - Internal dimensions: 394 x 187 x 10 cm (L x W x H) - Overall external dimensions: 553 x 254 x 80 cm (L x W x H) - Loading edge height: 44 cm - Tyres: 195/50R13C steel rim - Brake: yes - Jockey wheel: yes, 45mm with clamp - 100 km/h approval: available for an additional charge - incl. vehicle documents Body construction: - Floor: multiplex wooden floor - Side walls: anodized aluminum, 3-sided - Side wall height: 10 cm - Chassis: low-profile, lowerable, ALKO rubber suspension axle - Tipping function: lowerable - Hydraulics: hand pump - Approach angle: approx. 6° - Wheel chocks: not included - Drawbar & brake: ALKO - Frame/chassis: welded steel, hot-dip galvanized - Lashing eyes: 10, recessed on the sides - Winch: available for an extra charge - Supports: rear support - Ramps: with rear drive-on tip - Lighting plug: 13-pin - Approval: COC documents Standard equipment: - Multiplex wooden floor - extremely robust - Fixed side walls 10mm - Corner posts with insert options for e.g. cover bows - Very solid welded steel frame - Frame fully hot-dip galvanized by immersion - Numerous sturdy cross beams for high point load capacity - Hydraulically lowerable loading platform - Mechanical safety lock for the pivot axis during driving - With rear drive-on tip - Additional continuous longitudinal beams - Front storage box - 10 lashing eyes within the loading area - Rear number plate holder can be pivoted away for loading - ALKO overrun device and parking brake - ALKO coupling head - Reinforced, very strong V-drawbar - Reverse automatic device - 13-pin plug - Reversing lights – large safety lighting - Integrated rear fog lamp - Lighting recessed in the rear frame - Jockey wheel with central clamp - Registration documents: COC papers Optional accessories upon request: - 100 km/h approval with shock absorbers Ibjdpeu Htfxsfx Ab Uof - Anti-theft device - Spare wheel - High tarpaulin - Additional lashing eyes - Reversing lights - Lashing straps - and more... New vehicle with warranty and technical inspection. Financing options available! Descriptions and images are protected by copyright!! Over 800 trailers available for you immediately! With over 30 years of experience as Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix specialist dealer & workshop – delivery throughout Germany available at extra cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt – Errors, mistakes, and prior sale excepted –

Stanje: novo, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment Isdpfxol Tlhro Ab Usbf * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, lastna masa: 695 kg, največja dovoljena obremenitev: 2.805 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.450 mm, širina tovornega prostora: 1.620 mm, višina nakladalnega prostora: 100 mm, prostornina tovornega prostora: 0,6 m³, barva: srebrn, gradbena višina: 700 mm, delovna širina: 2.280 mm, Manual hydraulics, automatic reversing system, hot-dip galvanized, lowering loading platform, braked, * IMMEDIATELY AVAILABLE * incl. lowering loading platform / manual hydraulics / braked Technical Data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Permissible total weight: 3,500 kg - Unladen weight: 695 kg - Payload: 2,805 kg - Internal dimensions: 345 x 162 x 10 cm (L x W x H) - Total external dimensions: 500 x 228 x 70 cm (L x W x H) - Loading edge height: 44 cm - Tyres: 195/50R13C steel rims - Brakes: yes - Jockey wheel: yes, 45 mm with clamp - 100 km/h: available at extra charge - incl. vehicle documents Bodywork: - Floor: multiplex wood floor - Side walls: anodized aluminum, 3 sides - Side wall height: 10 cm - Chassis: low loader, lowering, ALKO rubber suspension axle - Tipping function: lowering Isdpsu Hrkyofx Ab Uebf - Hydraulics: hand pump - Approach angle: approx. 6° - Wheel chocks: none - Overrun device & brake: AL-KO - Frame/chassis: welded steel frame, hot-dip galvanized - Lashing eyes: 10 recessed on the side - Winch: available at extra charge - Supports: rear end stabilizing - Ramps: with drive-over tip at rear - Lighting plug: 13-pin - Registration: COC papers Standard Equipment: - Multiplex wood floor – extremely robust - Fixed side walls 10 mm - Insertion options at all corners, e.g. for tarpaulin frame - Very sturdy welded steel frame - Frame fully hot-dip galvanized by immersion - Numerous robust cross beams for high point load capacity - Loading platform hydraulically lowerable - Mechanical safety lock for swing axle during operation - With drive-over tip at rear - Additional continuous longitudinal reinforcements welded in - Storage box at front - 10 lashing eyes inside the loading area - Rear number plate holder, can be swung away for loading - AL-KO overrun device and parking brake - AL-KO coupling head - Very stable reinforced V-drawbar - Automatic reversing system - 13-pin plug - Reversing light - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Jockey wheel centrally with clamp - Registration documents: COC papers Optional Accessories (retrofittable, on request): - 100 km/h approval with shock absorbers - Anti-theft device - Spare wheel - High cover tarpaulin - Additional lashing eyes - Reversing light - Lashing straps - And much more New vehicle with warranty and TÜV. We are happy to offer you a suitable financing! Descriptions and images are protected by copyright!! Over 800 trailers available from stock! We have been authorized dealers & service workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years – repair/service – nationwide delivery in Germany possible at extra charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389, 46399 Bocholt - Errors, omissions, and prior sale excepted -

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer with pressure sensors for display of total axle load per axle group * Side underrun protection * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel panels, each with spray protection * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm (black powder-coated) mounted on right side * 15-pin power connector * LED lighting 12/24 V * LED revolving beacon (removable), rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (no installation required on the truck) * Rubber covering on the folding ramps as well as on the inclined ramp surface, left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from front to rear cross beam * Hardwood flooring on the walking surfaces of the low bed platform * Four stake pockets per side, each with simultaneous 2 t lashing capability Ibodpfxeq Dyvcs Ab Uef * Load securing package comprising 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions, recessed into the outer frame – in corners 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear incline) * Plank holder under the cargo area, lengthwise * Roller stop in front of the front cross member, raised, with one 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic side ramp displacement * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof * Dual-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm ramped section) * Loaded platform height: approx. 890 mm +/- 20 mm with air suspension * Chassis, turntable, roller stop, folding extensions & ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, lastna masa: 1.048 kg, največja dovoljena obremenitev: 2.452 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.550 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,8 m³, barva: srebrn, gradbena višina: 1.560 mm, delovna širina: 2.080 mm, Hydraulics, automatic reversing device, hot-dip galvanization, * IMMEDIATELY AVAILABLE * TECHNICAL DATA - Manufacturer: Hapert Trailers - Model: Indigo HT-2 - Vehicle Type: Construction machinery trailer - Vehicle Condition: New - First Registration: None - MOT/Inspection: 2 years from first registration - Internal dimensions (LxWxH): 455 x 201 x 30 cm - External dimensions (LxWxH): 618 x 208 x 156 cm - Loading floor height: 63 cm - Permissible gross weight: 3,500 kg - Unladen weight: 1,048 kg - Payload: 2,452 kg - Chassis: Platform trailer (wheels under the bed) - Tyres: 195/50R13C - Suspension: KNOTT parabolic leaf springs + 100 km/h package - Jockey wheel: Yes, automatic, 800 kg - 100 km/h approval: Included! Vehicle Construction: - Brakes: Yes - Number of axles: 2 - Floor: Full aluminum floor - Side panels: Aluminum side walls - Side wall height: 30 cm - Locks: Eccentric fasteners - Number of pallet spaces: 8 - Multifunction vehicle: Yes - Tipping/lowering function: Tiltable - Hydraulic pump: Double-acting hydraulic pump - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: Continuous V-drawbar, square tube - Mudguards: Plastic mudguards - Spare wheel: Optional, retrofittable - Bucket rest: No - Superstructures/extensions: Optional, attachable - Ramp compartment: No - Ramps/loading flap: Yes - Ramp type: Full-width tailgate - Ramp load capacity: -- - Approach angle: Approx. 11.5° - Supports: Integrated in tailgate - Lashing rings: 8 - Rear lights: Bulb, embedded in rear frame - Side marker lights: -- - Electrical connector: 13-pin - Vehicle documents: ZBII & COC papers Standard Equipment: - New side wall hinges incl. welded hooks for attaching e.g., load nets - Aluminum side walls with robust built-in latches - Anodized double-walled aluminum side walls Isdeu Hrm Ujpfx Ab Uobf - All side walls foldable and removable - Removable steel corner pillars - Insertion points at all 4 corners for tarpaulin frames, mesh sides, side wall extensions, or raised front panel - Sturdy eccentric locks - Hydraulically tiltable bed (11.5° approach angle) - Highly stable welded steel frame - Frame fully hot-dip galvanized by immersion - Numerous fully welded longitudinal beams for high point load resistance - Upright steel loading ramp, 100 cm shaft - Sturdy eccentric locks - Support jacks at loading ramp - Lifting aid for loading ramp - Very low chassis for minimal approach angle - 8 recessed lashing rings in side frame profiles (1000 daN/kg), TÜV certified - KNOTT parabolic spring axle - Shock absorbers installed for 100 km/h - Parabolic leaf spring axle for outstanding ride comfort - Automatic reversing mechanism - KNOTT overrun device and handbrake - Highly stable, reinforced bolted V-drawbar - 13-pin plug - Reversing lights - Large, high-visibility safety lighting - Integrated rear fog light - Lighting embedded in rear frame - Automated central jockey wheel Special Equipment Included in Price: - Full aluminum profile floor - 30 cm high aluminum side walls (front and sides), instead of fixed Combi Protect Rail New vehicle with warranty and MOT. We also offer attractive financing solutions! Descriptions and images are copyright protected!! Over 800 trailers immediately available from stock! For over 30 years: Official dealer & service centre for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix — Sales & repairs — Workshop — Delivery throug

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes Iedpfx Abopk D D He Ujbf * 2 x 11 t Gigant axles * Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm mounted laterally right (black powder-coated) * Side underrun protection * Plastic quarter-mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drill rig transport on chassis – load height +20 mm * 50 mm softwood floor, clamped design * Preparation for subsequent fitting of container locks in front of the bulkhead * Bolt-on front wall made of smooth steel sheet * Trapezoidal-profiled side walls made of steel sheet, foldable with drop-side spring assists * Steel rear wall, retractable between the ramps – storage bracket inside front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring, front and end beams with multiple holes for 1.2 t lashing points * One-piece mechanical grated ramps with spring system for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Drop-side panels painted RAL 9010 pure white * Side panels can be painted in any RAL color at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available immediately from Egestorf

Stanje: novo, lastna masa: 585 kg, največja dovoljena obremenitev: 2.115 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.450 mm, širina tovornega prostora: 1.620 mm, višina nakladalnega prostora: 100 mm, prostornina tovornega prostora: 0,6 m³, barva: srebrn, gradbena višina: 700 mm, delovna širina: 2.280 mm, Hand-operated hydraulics, automatic reversing system, hot-dip galvanization, hydraulically lowerable loading platform, braked, * IMMEDIATE AVAILABILITY * incl. lowerable loading platform / hand-operated hydraulics / braked Technical Data: - Type: new vehicle - TÜV inspection: new/2 years - Availability: IMMEDIATE! - Permissible total weight: 2,700 kg - Unladen weight: 585 kg - Payload: 2,115 kg - Internal dimensions: 345 x 162 x 10 cm (L x W x H) - External dimensions: 500 x 228 x 70 cm (L x W x H) - Loading edge height: 44 cm - Tyres: 195/50R13C steel rims - Brakes: yes - Jockey wheel: yes, 45mm with clamp bracket - 100 km/h approval: at extra cost - incl. vehicle documents Body structure: - Floor: multiplex wooden floor - Side walls: anodised aluminium on three sides - Side wall height: 10 cm - Chassis: low loader, lowerable, ALKO rubber suspension axle - Tipping function: lowerable - Hydraulics: hand pump - Ramp angle: approx. 6° - Wheel chocks: not included - Overrun brake & braking system: ALKO - Frame/chassis: welded steel frame, hot-dip galvanized - Lashing rings: 10 pieces, flush-mounted on the sides - Winch: available at extra cost - Supports: rear support - Ramps: rear drive-over tip - Lighting plug: 13-pin - Registration: with COC documents Standard equipment: - Multiplex wooden floor - extremely robust - Fixed side walls, 10mm - Socket inserts on all corners for e.g. tarpaulin frame - Very robust welded steel frame - Frame fully hot-dip galvanized in an immersion bath - Many sturdy cross members enabling high point load capacity - Hydraulically lowerable loading platform - Mechanical safety locking of the pivot axle during driving - Rear drive-over tip - Additional continuous longitudinal beams welded in - Front storage box - 10 lashing rings within the loading platform - Swivelling rear number plate holder for convenient loading - ALKO overrun device and handbrake - ALKO coupling head - Very robust reinforced V-drawbar - Automatic reversing system - 13-pin plug - Reversing light - Large-dimension safety lighting - Integrated rear fog light - Lighting integrated and recessed in the rear frame - Jockey wheel centrally mounted with clamp - COC registration documents Optional accessories on request: - 100 km/h approval with shock absorbers - Anti-theft device - Spare wheel - High tarpaulin - Additional lashing rings - Reversing light - Lashing straps - and much more. New vehicle with warranty and TÜV inspection. Attractive financing offers available! Descriptions and images are copyright protected!! Over 800 trailers immediately available from stock! We have been specialists and authorized dealers of Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years – workshop & repairs – Delivery throughout Germany available at extra cost! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt – Subject to errors, changes, and prior sale – Isdpfx Abou Hri As Ujbf

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: Ibedpfx Ajv Eq Evjb Uof * RDÜ tire pressure monitoring system * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensator unit * Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front landing gear (support winch) * External foldable rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * In front of the front wall and rear slope, preparation for retrofitting container locks for transporting 20" containers * Bolted smooth sheet metal front wall * Drop-down steel side walls – trapezoidal profile – split once in the middle * Insertable steel rear wall; can be stored inside in the ramp holder at the front wall when not in use * Bolted rear corner posts * Perforated outer frame, kinked at approx. 45 degrees, 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm; each front and rear corner with 1 x 6.3 t lashing point; various boreholes in the front and end crossmembers for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Rear entry slope approx. 860 mm chassis * Drawbar, front wall, tailgate, foldable supports and loading ramps hot-dip galvanized * --- Axles, springs, air tanks, flange drawbar eye as well as landing gear painted in a black tone --- * Reinforced and certified body according to EN 12642 XL incl. load securing certificate -- * Wheelbase 1,140 mm * Side wall painting in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra cost * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, lastna masa: 1.025 kg, največja dovoljena obremenitev: 2.475 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 960 mm, prostornina tovornega prostora: 7,2 m³, barva: srebrn, gradbena višina: 2.100 mm, delovna širina: 2.400 mm, Reverse drive automatic system, hot-dip galvanization, mesh extension / heavy-duty ramp / extremely robust construction / multifunctional use / LED lighting / jockey wheel, * IMMEDIATELY AVAILABLE * incl. mesh side extension / heavy-duty ramp / extremely robust body / multifunctional use / LED lighting / jockey wheel TECHNICAL DATA: - Brand: Brian James - Model: General Plant - Vehicle Type: Construction machinery trailer - Vehicle Condition: New - First registration: None - TÜV/Main Inspection: 2 years from first registration - Internal dimensions (LxWxH): 400 x 180 x 96 cm - External dimensions (LxWxH): 569 x 240 x 210 cm - Load floor height: 48 cm - Perm. total weight: 3,500 kg - Unladen weight: 1,025 kg - Payload: 2,475 kg - Chassis: Low-bed (wheels next to the superstructure) - Tyres: 195/60R12C - Suspension: AL-KO rubber torsion axle - Jockey wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION: - Universal all-round construction machinery trailer - Unique in the market - Every available option is flexibly attachable or removable, allowing needs-based customization for almost any application - Stake pockets at all 4 corners for side panels, tarpaulin racks, side extensions or front wall extensions - Steel side extension – 50% mesh, 50% solid wall, tool-free removable - Includes recessed eccentric locks Ibodou Hrmnspfx Ab Usf - Durable rubber strip seals extension to lower sidewall - Vehicle is pre-configured for all options after purchase: tremendous retrofit potential: hydraulic tip functions, winches, different ramps, extensions, etc. are upgradable at any time - Robust steel fenders with non-slip perforated pattern - Reinforced phenolic plywood floor 18mm, anti-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized by immersion process - Chassis with additional longitudinal beams under the load area - Sturdy ACME locking system: closes silently, loading ramps are secured with safety clamp locks, rubber buffer dampens noise - Continuous heavy-duty perforated steel ramp, galvanized and spring-assisted - Very low chassis for a shallow approach angle - Lashing points at the top and bottom of the side wall (certified 1,000 daN/kg by TÜV) - Side panel color: black - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted for easy access on side wall - Automatic reverse braking system - AL-KO overrun device and parking brake - Coupling head made of cast steel with integrated high-security lock (AL-KO) - Extremely stable reinforced V-drawbar - 13-pin connector - Full LED lighting: extremely bright, durable and reliable - LED marker lights at the rear - Reversing light - Integrated rear fog lamp - Robust tail light protection - Automatic heavy-duty jockey wheel - 5-year chassis warranty Accessories retrofittable – please inquire! - Excavator bucket carrier - Tipping hydraulics - Lashing straps - Toolbox - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and images are copyright protected! More than 800 trailers immediately available from us! Over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix – Specialist dealer & repair workshop – Delivery Germany-wide available at extra cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, mistakes, and interim sale excepted.

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system Ibsdjl Tpwyspfx Ab Ujf * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Pressure gauge for determining load weight (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, both with splash protection * Reflective contour marking tape on the sides and rear * Foldable toolbox lid (hot-dip galvanized) on the turntable platform * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 2 x 7-pin electrical connectors * 4 stake pockets per side, each offering 2 t lashing capacity * Load securing package including: 2 lashing eyelets (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant adjustable and folding lashing rings, loadable in all directions and recessed into the outer frame – corner capacity 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (except rear angle) * Broadening planks stored in the middle of the loading platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, folding widenings & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, lastna masa: 745 kg, največja dovoljena obremenitev: 2.755 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.450 mm, širina tovornega prostora: 1.620 mm, višina nakladalnega prostora: 100 mm, prostornina tovornega prostora: 0,6 m³, barva: srebrn, gradbena višina: 700 mm, delovna širina: 2.280 mm, Hydraulically Lowerable Loading Platform / Manual Hydraulic Pump / Braked, Reverse Drive Automatic, Hot-Dip Galvanized, * IMMEDIATELY AVAILABLE * incl. Lowerable Loading Platform / Manual Hydraulic Pump / Braked Technical Specifications: - Type: New vehicle - MOT: New / 2 years - Availability: Immediate - Permissible Total Weight: 3,500 kg - Unladen Weight: 745 kg - Payload: 2,755 kg - Internal Dimensions: 345 x 162 x 10 cm (L x W x H) - Overall External Dimensions: 500 x 228 x 70 cm (L x W x H) - Loading Edge Height: 44 cm - Tyre Equipment: 195/50R13C steel rim - Brakes: yes - Jockey Wheel: yes, 45 mm with clamp - 100 km/h Approval: at extra charge - incl. vehicle documents Vehicle Structure: - Floor: Multiplex wooden floor - Side Panels: Anodized aluminium, 3-sided - Side Panel Height: 10 cm - Chassis: Lowerable low-loader, ALKO rubber suspension axle - Tilting Function: Lowerable - Hydraulic System: Electric & manual emergency pump - Ramp Angle: approx. 6° - Wheel Chocks: not included - Overrun Brake & Braking System: ALKO - Frame / Chassis: Welded, hot-dip galvanized steel frame - Lashing Rings: 10, recessed on sides - Winch: available as an option - Support Legs: rear support - Ramps: with rear drive-over edge - Lighting Connector: 13-pin - Certification: COC papers Standard Equipment: - Multiplex wooden floor - extremely robust - 10 mm fixed side panels - Corner sockets on all corners, e.g. for tarpaulin frame - Very stable, welded steel frame - Frame fully hot-dip galvanized via immersion bath - Numerous robust cross members for high point load capacity - Hydraulically lowerable loading platform - Mechanical safety lock for pivot axis during driving - Drive-over edge at rear - Additional longitudinal bars, fully welded - Front storage box - 10 lashing rings within load platform - Rear number plate holder, swivels away for loading - ALKO overrun brake and parking brake - ALKO coupling head - Very stable V-shaped drawbar, reinforced - Reverse drive automatic - 13-pin plug - Reversing lights - Large, safety lighting system - Integrated rear fog light - Rear lighting recessed into frame - Jockey wheel with central clamp - Registration papers: COC papers Special Features Included in Price: - Electric single-acting pump with 12V/74Ah battery - Rear ramp made of 420 mm stainless steel sheet Retrofit Accessories – enquiries welcome: - 100 km/h approval with shock absorbers - Anti-theft devices - Spare wheel - High tarpaulin - Additional lashing rings - Reversing lights - Lashing straps Ibodpfxsu Hryuj Ab Uof - and much more New vehicle with warranty and MOT. We are happy to offer you a suitable financing option! Descriptions and images are protected by copyright! Over 800 trailers immediately available from us! For over 30 years we have been specialist dealers, repair and service workshop, and supply nationwide delivery (at extra charge) for: Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Trailer Centre BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted.

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system Ijdpfx Ael Th Hwsb Usbf * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalization unit * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar * Jost landing gear at front * External folding supports at rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Pre-fitted for retrofitting container locks in front of the headboard * Bolted headboard made of smooth sheet metal * Trapezoidal profile steel side panels, foldable with sideboard spring lifter * Steel rear wall, insertable between the ramps; storage bracket inside the headboard when not in use * Bolted rear stanchions * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the headboard and rear cross-member for 1.2 t lashing options * One-piece mechanical grating entry ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear entry slope approx. 860 mm * Chassis, drawbar, headboard, rear wall, entry ramps and folding supports hot-dip galvanized * Sideboard painted in RAL 9010 pure white * Side panels can be painted in any RAL color at extra cost * Axles, springs, air tanks, drawbar eye, and landing gear painted black * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: * Load area 5.37 m * TPMS (Tire Pressure Monitoring System) * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Drawbar adjustable in height by approx. 300 mm * Jost landing gear at the front * Rear folding external supports * Plastic toolbox front right, mounted externally on the front wall * Side underrun protection * LED lighting * Plastic quarter-mudguards * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Trapezoidal steel side walls, foldable, with tailboard spring assist * Sliding steel rear wall, stowable in front of the front wall between the ramp mounts when not in use * Rear stanchions bolted on * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm Ibodpfx Abel Th Nro Uof * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Tapered rear frame, approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side walls painted in RAL2011 deep orange * Side wall painting in other RAL colors available for an extra charge * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: * RDÜ (Tyre pressure monitoring system with display capability in the truck via EBS signal, no installation required on the truck side) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t Gigant axles * Air suspension with lifting and lowering function * Drawbar height-adjustable by approx. 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted on the front wall * Side underrun protection * Plastic quarter mudguards * LED lighting system * 15-pin power plug * Hot-dip galvanized chassis, drawbar, front and rear wall * 50 mm softwood floor * Prepared for retrofitting 20" container locks at the front and rear * Bolted front wall made of flat sheet steel * Drop-down steel sheet side walls – trapezoidal profile – with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; one 6.3 t lashing ring in each corner, front and rear; various anchoring holes (1.2 t) in the front and end crossmembers * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles, stored at the rear in a compartment recessed in the chassis under the loading area * Vehicle fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf Iedjpk D Dqspfx Ab Uebf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * EC approval-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * Tire Pressure Monitoring System (RDÜ) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flanged towing eye and 110 mm height adjustment via offset plate * Jost landing gear at the front * Rear external folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side Ibsdpfx Aemi Tmajb Usf * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber taillights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood plank floor, clamped design * Pre-fitting for retrofitting container locks in front of the bulkhead * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, fold-down with central folding stanchion * Steel rear wall, can be inserted between the ramps – when not in use, stored at the front inside the bulkhead * Rear stanchions bolted * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV recessed lashing rings in the outer frame, various holes in the bulkhead and end cross member for 1.2 t lashing points * One-piece slide-in ramps approx. 2,750 x 620 mm * Rear drive-up slope approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and drive-up ramps hot-dip galvanized * ---Axles, air tanks, flanged towing eye, and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75 R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.200 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2023, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor with clamped design * Mounting provision in front of the bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Split sidewalls made of trapezoidal-profile steel, foldable with central drop-in stanchion * Steel rear wall, can be slid in between the ramps – storage bracket when not in use located inside at the front bulkhead * Rear stanchions bolted * Perforated outer frame bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * Load securing package: 1 x 10 t UVV-certified lashing point in each front and rear corner, 2 x 8 t UVV-certified retractable lashing rings per side in outer frame, various holes in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be collapsed to 20 mm) * Rear drive-on angle approx. 860 mm Ibsdpfjl Tp Azex Ab Uof * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, air tanks, flanged towing eye, and support winch painted in black * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Body side panels painted in RAL 9010 pure white * Side walls can be painted in any RAL shade at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension * Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * Jost landing gear at the front * LED rear lights * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right on the outside of the front wall * Side underride protection * Plastic quarter mudguards * Hot-dip galvanized chassis, as well as drawbar, front wall, rear wall, tailgate, and loading ramps * 50 mm softwood floor * Fixture in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding, with board spring lifter Iedpfjq Dyvyex Ab Uobf * Steel rear wall, can be slid in between the ramps—storage bracket for rear wall in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm, option to fit 3 t recessed lashing rings every 600 mm; in each front and rear corner one 6.3 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm) * Approach angle at rear approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Side panel color RAL 9010 pure white * Painting of the side walls in a RAL color shade available at an extra charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf