Priklopnik z delovno ploščadjoMÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Fiksna cena plus DDV
29.950 €
(35.640 € bruto)
Leto izdelave
2026
Stanje
Novo
Lokacija
Egestorf 

Osnovni podatki
Cena in lokacija
Fiksna cena plus DDV
29.950 €
(35.640 € bruto)
- Lokacija:
- Eichenstich 12, 21272 Egestorf, Deutschland

Pokliči
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 14.660 kg
- Skupna masa:
- 18.000 kg
- Konfiguracija osi:
- 2 osi
- Dolžina tovornega prostora:
- 6.270 mm
- Širina tovornega prostora:
- 2.470 mm
- Višina nakladalnega prostora:
- 400 mm
Podrobnosti ponudbe
- ID oglasa:
- A104-27-186
- Referenčna številka:
- 58341
- Posodobitev:
- nazadnje dne 13.05.2026
Opis
ETÜ-TA-R 19.0:
----Brakes:
* Wabco EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs – 110 mm wide – with tandem equalizer unit
----Drawbar / Drawbar Eye:
Drawbar with 50 mm flanged towing eye and height-adjustable drawbar
----Electrical / Lighting:
* 15-pin power connector
* LED taillights
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead panel, smooth sheet metal
* Side walls made of trapezoidal profiled steel sheet, foldable with board-wall spring assist
Itedpel Th Hwofx Ag Ijg
* Steel rear wall insertable between the ramps, with internal storage in the front when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Optional installation of 3 t fold-down lashing rings every 600 mm
* 1 x 10 t lashing ring in each front and rear corner; multiple holes in the front and rear crossmembers for 1.2 t lashing options
* Profifix lashing rail centrally along the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm)
* Rear access slope approx. 860 mm
----Paintwork:
* Chassis, drawbar, bulkhead, rear wall, drive-on ramps, and folding supports hot-dip galvanized
* Sideboard painting in RAL 9010 pure white
* Optional painting of the side walls in a RAL colour for an additional charge
* Axles, springs, air tank, flanged towing eye, and landing gear painted in black
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Available approx. from calendar week 21/2026
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
----Brakes:
* Wabco EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs – 110 mm wide – with tandem equalizer unit
----Drawbar / Drawbar Eye:
Drawbar with 50 mm flanged towing eye and height-adjustable drawbar
----Electrical / Lighting:
* 15-pin power connector
* LED taillights
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead panel, smooth sheet metal
* Side walls made of trapezoidal profiled steel sheet, foldable with board-wall spring assist
Itedpel Th Hwofx Ag Ijg
* Steel rear wall insertable between the ramps, with internal storage in the front when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Optional installation of 3 t fold-down lashing rings every 600 mm
* 1 x 10 t lashing ring in each front and rear corner; multiple holes in the front and rear crossmembers for 1.2 t lashing options
* Profifix lashing rail centrally along the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm)
* Rear access slope approx. 860 mm
----Paintwork:
* Chassis, drawbar, bulkhead, rear wall, drive-on ramps, and folding supports hot-dip galvanized
* Sideboard painting in RAL 9010 pure white
* Optional painting of the side walls in a RAL colour for an additional charge
* Axles, springs, air tank, flanged towing eye, and landing gear painted in black
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Available approx. from calendar week 21/2026
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
169 Oglasi na spletu
Pošlji povpraševanje
Telefon & Faks
+49 40 33... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake






























