Priklopnik z delovno ploščadjoMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Stalna cena brez DDV
35.900 €
(42.721 € bruto)
Leto izdelave
2025
Stanje
Novo
Lokacija
Egestorf 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Stalna cena brez DDV
35.900 €
(42.721 € bruto)
- Lokacija:
- Eichenstich 12, 21272 Egestorf, DE

Klic
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 14.400 kg
- Skupna masa:
- 19.000 kg
- Konfiguracija osi:
- 2 osi
- Dolžina tovornega prostora:
- 6.270 mm
- Širina tovornega prostora:
- 2.470 mm
- Višina nakladalnega prostora:
- 400 mm
Podrobnosti ponudbe
- ID ponudbe:
- A107-46-176
- Št. reference:
- 61601
- Nazadnje posodobljeno:
- dne 25.06.2025
Opis
* EC approval-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* Tire Pressure Monitoring System (RDÜ)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar with 50 mm flanged towing eye and 110 mm height adjustment via offset plate
* Jost landing gear at the front
* Rear external folding supports
Djdpfx Acjmi Tmajwscp
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* Multi-chamber taillights
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood plank floor, clamped design
* Pre-fitting for retrofitting container locks in front of the bulkhead
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with central folding stanchion
* Steel rear wall, can be inserted between the ramps – when not in use, stored at the front inside the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV recessed lashing rings in the outer frame, various holes in the bulkhead and end cross member for 1.2 t lashing points
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Rear drive-up slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and drive-up ramps hot-dip galvanized
* ---Axles, air tanks, flanged towing eye, and landing gear painted black---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75 R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
* Wabco EBS-E (electronic braking system)
* Tire Pressure Monitoring System (RDÜ)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar with 50 mm flanged towing eye and 110 mm height adjustment via offset plate
* Jost landing gear at the front
* Rear external folding supports
Djdpfx Acjmi Tmajwscp
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* Multi-chamber taillights
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood plank floor, clamped design
* Pre-fitting for retrofitting container locks in front of the bulkhead
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with central folding stanchion
* Steel rear wall, can be inserted between the ramps – when not in use, stored at the front inside the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV recessed lashing rings in the outer frame, various holes in the bulkhead and end cross member for 1.2 t lashing points
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Rear drive-up slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and drive-up ramps hot-dip galvanized
* ---Axles, air tanks, flanged towing eye, and landing gear painted black---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75 R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
Pošlji zahtevo
Telefon & Faks
+49 40 33... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake




















































