Priklopnik z menjalnim šasijem

WEB-TRAILER Wechselanhänger 235/75 R17.5 / 970 - 1220mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.845 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 04/2021, naslednji pregled (TÜV): 07/2026, vzmetenje: zrak, velikost pnevmatike: 245/70 R 19.5, medosna razdalja: 5.170 mm, barva: črn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2021, Oprema: ABS, Mega Box Carrier AZW 18 z LTB7, dvojna montaža pnevmatik Dolžina okvirja za WP 7, poravnana z zadnjim delom Višina pri parkiranju 1.020 - 1.320 mm, Vozna višina prazno cca 1.045 mm, nizko vzdrževen vrtljivi obroč Dolžina vlečne palice 2.100 mm, z zadrževalno vzmetjo Vlečna ušesa 40 mm, 8x, pnevmatike 245/70 R 19.5 EBS sistem Obrisne luči z gumijastimi nosilci (LED) Stranske označevalne luči LED 2 dodatna LED delovna žarometa BPW osi Orodjarna, plastika, Šasija in vlečna palica globoko črna (RAL 9005) Vmesna prodaja in napake pridržane Alternativno s KRONE zamenljivo nadgradnjo/ponjavo Edscha, Certifikat EN 12642 XL Psdpfx Asyhgwqsnmepr Dovoljena skupna masa 16.000 kg, Letnik 06/2018 Lastna masa 2.431 kg Cena na zahtevo

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: * 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), display capability in truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier (basket type) on the right side * Closed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel deck with recessed rollers in the bogie area * Can transport roll-off containers with a container length of 5,500 – 7,000 mm * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the guide track * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of the skips, front 4 stops plug-in with pivoting stop * Weld bead as anti-slip coating in the ramp area of the track * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing with tensioning elements, 4 cloverleaf-type lashing brackets per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t recessed lashing eyes per side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) Psdpfx Aswb Rakonmepr ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Additional Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: rabljeno, največja dovoljena obremenitev: 12.280 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2001, dolžina tovornega prostora: 6.350 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.400 mm, skupna višina: 1.100 mm, Hoffmann tandem prikolica s prekucnikom za kontejnere Skupna masa: 18.000 kg Lastna masa: 5.720 kg Nosilnost: 12.280 kg Skupna dolžina: 8.205 mm Nakladalna dolžina: 6.350 mm Širina: skupna širina 2.400 mm / nakladalna širina cca 2.200 mm Nakladalna višina: cca 1.100 mm Dodatne informacije - dvojna kolesa - teleskopska vlečna palica - hidravlične podporne noge - zaklep za valjasti kontejner - naletne rampe - prekucnik - pritrditvene točke - zračno vzmetenje Podpfjxmq Hlex Anmopr - zadnja podpora

Stanje: novo, lastna masa: 2.680 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2026, vzmetenje: zrak, velikost pnevmatike: 9-fach 235/75 R 17,5, medosna razdalja: 5.170 mm, barva: črn, Oprema: ABS, 2-axle interchangeable traffic trailer, new vehicle. Design: UPS version. AZW 18. ABS/EBS drum brakes, axles (BPW, manufacturer selection). Dimensions: L = 8,945 to 9,345 mm, W = 2,480 mm. Unladen weight: 2,780 kg. Lift height top: 1,140 mm, lift height bottom: 880 mm, ride height: 980 mm. Wheels equipped with internal sensors and a tire pressure monitoring system in accordance with UN ECE R 141 (TPMS). Tyres: 9 x 235/75 R17.5 (FULDA, manufacturer selection) with galvanized spare wheel carrier. Suitable for transporting standardized swap bodies according to EN 284, sizes C715 and C745. Suitable for transporting standardized containers according to ISO 668/1496, size 20'. Due to the design of the underrun guard according to EC standards, the rear cannot be loaded flush. Towing bar offset 150 mm. Towing bar extendable from 2,000 to 2,400 mm (8 x 50 mm increments). Factory setting at 2,200 mm. Ø 40 mm towing eye. Warning panel ECE-R70 (red/yellow), splash guard in accordance with EC directives, impact protection with rubber buffers. 1 folding parking warning panel. Lighting and signaling system according to UN ECE R48. Including 2 LED license plate lights, LED side marker lights, LED contour lights in rubber arm. Podpfjtrgytjx Anmspr Electrics: 15-pin or 2x7-pin as requested by customer included. Air: Duomatic or yellow/red as requested by customer included. Accessories available at additional cost. All stated values are approximate in mm and kg. Delivery date on request. Leasing possible. Offer subject to change, prior sale reserved. Prices net ex location D-59558 Lippstadt-Rixbeck. For further objects, please visit our website.

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles Ppsdpfx Ajpk D Dqsnmjr ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: 3 in 1 = suitable for hooklift containers, skip containers, and as a low-bed trailer ----Braking System: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm tow eye and height adjustment device ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System), display capability in the truck via EBS signal (no truck-side installation required) * LED tail lights, 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder, basket design, right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffer * Folding A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame to guide roll-off containers * Steel sheet floor with roller recesses in the bogie area * When transporting roll-off containers: container length from 5,500 - 7,000 mm possible * Pneumatic 4-point container locking system and mechanically lockable stop angles at the front of the track * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering, the front 4 are plug-in with pendulum-mounted stops * Weld bead as anti-slip surface in the inclined ramp area * Mechanical rear drop supports ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips, 4 lashing brackets each (shamrock design) on the sides * 1 pair of 13.4 t UVV lashing rings forward * 4 x 8 t lashing eyes recessed in the outer frame on each side ----Ramps: * Aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Painting: * Reflective contour markings, sides & rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- Psdpfx Anol Tnwzemjpr * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf

Stanje: novo, številka stroja/vozila: 06017a31026c05fc8f6ccf5ae, lastna masa: 3.055 kg, največja dovoljena obremenitev: 14.945 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Swap body turntable trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20' base for swap bodies 7.15 and 7.45 meters Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-shell mudguards at the rear Drawbar turntable trailer coupling Drawbar with certified 40 mm draw eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Braking system 2-line air brake system, color-coded piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS plug at the front and connecting cable Note: The trailer must only be towed by towing vehicles that ensure ABS functionality! With raise & lower valve, holding function for both positions Wheels and tires 235/75 R17.5, manufacturer brand at the manufacturer's discretion Pjdpfx Ansi Ri Rcjmepr Steel twin rims, factory silver Electrics 24V system, LED multi-chamber lights with resistor, side marker lights in amber LED, license plate illumination in LED (Note: certain towing vehicles may show fault diagnoses despite correct function) 2 white front position lights in LED 2 white/red rear outline marker lamps in LED 1 x 15-pin plug at the front with connecting cable Additional LED work light at the rear, switched via the reversing light Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey Note: Archive images!

Stanje: rabljeno, prva registracija: 02/2019, Leto izdelave: 2019, SCHWARZMÜLLER Z2 2-osna tandem 3-stranski kiper priklopnik, jeklo / aluminij Alcoa 19.000 kg ● 2 x BPW EAC HD - 9 t osi ● Polno zračno vzmetenje ● ABS / EBS ● Dvižno/spuščalna naprava ● Duomatik priključek Psdpfxsx Nc Ebo Anmjpr ● ALU kiper nadgradnja ● Jekleno dno z vponkami za privez ● Deljene stranske ALU stranice ● Zadnja stran iz jekla ● Skupna dolžina vozila: 7.150 x 2.550 x 2.600 mm (DxŠxV) ● Notranje mere nadgradnje: 5.120 x 2.450 x 1.000 mm (DxŠxV) ● Prostornina: 13 m³ ● Ponjava na rolo ● Dostopna platforma ● Pnevmatike: 385/65 R 22.5 ● Platišča ALCOA - Durabright ● Dober profil! ● Lastna teža: 4.100 kg ● Skupna dovoljena masa: 19.000 kg - Nemško vozilo! - Tehnični pregled: NOV! Pridržujemo si pravico do napak in vmesne prodaje! = Dodatne informacije = Za več informacij se obrnite na Joannis Arpantzanis ali Kai Bühler.

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped version * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted front bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the middle * Steel rear wall, insertable between the ramps; stowage fixture in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t drop lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, 2 x 8 t retractable UVV lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flanged towing eye, and support winch painted in black--- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted Ppedpfx Asmi Tmajnmsr * Immediately available ex Egestorf