Kässbohrer Lb3E Low-Bed Semi-Trailer / 2025/ 4 Axl nakup rabljenega (54.122)

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: Njdpsl Uxdkefx Aibewf One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: Nodpfx Ajtphtmjibswf S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: novo, lastna masa: 34.500 kg, največja dovoljena obremenitev: 106.700 kg, skupna masa: 141.200 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.150 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 580 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 34.500 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically lift/lowerable as well as detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie: - Hook mounts at front and rear Nwodpfx Aowhywfsibsf - Chassis length x chassis width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and bolted lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x beam width approx. 430 mm x 1,350 mm - Loading height 580 mm with 150 mm ground clearance - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of threaded blocks M30 on inner beam for mounting screw-on rings 5-Axle Rear Bogie: - Mechanical bolt-on lug coupling for fitting a lowbed front, rear end traverse - Chassis length x chassis width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear bogie): - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-plugs for securing in lifted position - Final paint of axles with 2 coats of 2K paint, single-colour in MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres 285/70 R19.5 Steering Override: - Remote steering from the front and rear via cable remote control with push buttons, including axle tracking control - Socket for steering control operation on the gooseneck - Cable remote control with push buttons including axle tracking control Included accessories: - Yellow-red air couplings on galvanised front connection rail - Steel headboard approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" kingpin - Gantry with winch for spare wheel at the front side of the gooseneck - Truck hydraulic connection with flow control valve (40 l/min), including gantry for suspension of supply lines, tractor unit tank must be at least 80 litres with couplings - White reflective tape according to EU regulations on sides and extension, red at rear - Plug-in ALU side panels and rear wall on gooseneck, approx. 400 mm high, anodised - Operating lever on gooseneck protected by folding cover - Separate air connection with air pistol on gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2: 1x on the gooseneck, 1x on 3-axle bogie, 1x on 5-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections in the lowbed hook area - Front bogie with separate air connection for air screwdriver - Threaded inserts (ø 40 mm) every approx. 500 mm on outside of upper flange of excavator deck for screw rings - Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel mats with rubber covering approx. 12 mm thick - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering override in addition to cable remote - Painted sand layer as anti-slip measure - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit Nodpeh Etf Rofx Aibswf - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps. Nwsdpfx Aowu A Slsibjf

Stanje: rabljeno, največja dovoljena obremenitev: 75.700 kg, skupna masa: 93.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 885 mm, velikost pnevmatike: 245/70 R17.5, barva: bež, Leto izdelave: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at the end of the gooseneck) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Swing radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - One-piece aluminum drop sides, 400 mm high, closed on 3 sides including rear tailboard, stakes foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Single telescoping, continuous over chassis - External/internal tube construction with 1,090 mm fixed loading platform section at front - (L x W): 8,700 mm x 2,550 mm, extendable by 6,700 mm to max. 15,400 mm - Steel floor covering - Locking of extension stages via spring-loaded cylinders and conical bolts - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stake pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steering axles - Axle brand: SAF - Chassis width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel / wood Vehicle rear: - "Beveled" design (600 mm long, 10° bevel) - 1,000 mm overhang from center of last axle - Ramp eye detachable at the rear cross member - Mechanical support for stowage during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Loading ramps: - Two-piece loading ramps, length 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting mechanism - SuperGrip rubber surface - Climbing strips on outside of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to maximum external width of 2,790 mm or minimum internal spacing of 480 mm - Integrated mechanical lock in ram lift cylinder for securing in transport position - Mounting bracket for beacon light Hydraulics: Nsdsxp U Tzopfx Aibjwf - Hydraulic coupling for tractor unit (1 set), connectors for tractor, hydraulic pump on tractor unit with maximum 60 l/min delivery rate - Hydraulic hand emergency pump - Electric-hydraulic power pack Rear steering: - Rear steering bottle for manual steering of trailer axles by cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at front of gooseneck, pluggable, galvanized - Mounting bracket for stakes on gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm - Widening kit incl. widening beams, hook-on widening element at vehicle rear - 1 pair wheel chocks incl. holder - 1 spare wheel - Central lubrication system with 2 grease pumps - Single-color paint finish in RAL-1001 beige

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm - Gooseneck height 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward, punch-hole design - Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable - Step 80x80 mm in the frame before and after the division - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended rear plate - Drop leg supports at the rear Ramps: - 2 single-piece aluminum ramps, special version with spring-assisted lifting - Length x width approx. 2,500 mm x 600 mm - Lockable in transit position with lashing straps - Manually adjustable sideways Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with a total lift of approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-offset - 12 tyres 245/70 R 17.5 143/141J, tubeless Nwjdpfexnym Dsx Aibef - Tyre pressure monitoring included Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing gear with single-side operation and compensating support Paintwork: - Steel grit-blasted, spray-galvanized chassis and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey - Reflective side and rear stripes in yellow Accessories: - Plug-in side and rear panels on gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks with holders - Elongated license plate holder in rear plate - 1 ECE panel at the rear, plug-in - 11 pairs ZK modules 10t, side-mounted: - 2x on gooseneck - 2x on loading platform before extension - 7x after extension - Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm - 4 holders for warning signs, plug-in to stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes - 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted to underrun protection

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Njdpfx Aiewg E Rbjbewf

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.200 kg, največja dovoljena obremenitev: 31.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2019, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 235.75 r 17.5, barva: prometno oranžna, Leto izdelave: 2019, Oprema: ABS, Rabljen polpriklopnik nizkopodni Moeslin, gosji vrat, rampe, 3 osi (tretja vodilna), zračno vzmetenje, EBS, priprava za pomične zadnje rampe, sprednja glava 120 cm, bočni kavlji Rud 5 ton, twist lock za kontejnerje 20+20, 40 in 45 čevljev, 3 prečne ojačitve za nosilce, 2 PVC orodjarni, višina od tal 84 cm, letnik 2019, na voljo pri trgovcu INTERDRIVE SRL-PARMA. Nwjdpjxnqvcofx Aibef

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 13.000 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 07/1995, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: modra, Leto izdelave: 1995, Oprema: ABS, extendable low-loader De Angelis, year 1995, payload up to 37 tons, 3 axles with air suspension, ABS, 2nd and 3rd axles steering, extendable chassis with a central extension of additional 3.50 m, closed well (culla) 5.0 m, height from ground 44 cm, removable cover above axles, manual rear ramps, good condition, DEALER: INTERDRIVE SRL – PARMA Njdpfxswa T T Ro Aibewf

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° Nwjdjuqlmnjpfx Aibef - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Nwedpfxsvy Edce Aibjf Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Nsdpet Ag Uwofx Aibewf Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve Nwodpfx Aijunrapjbef - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, številka stroja/vozila: W09STLB3NCEN1xxxx, Leto izdelave: 2012, Prosimo, navedite referenčno številko ob povpraševanju: 22956 Tehnični podatki: Leto izdelave: 2012 Nedpfx Asy Dn Hmsibswf Zasukljiv na 3. osi Dvig na 1. osi Dobre pnevmatike (glej slike) Dolžina spodnje ravni: 9,50 m Dolžina zgornje ravni: 4 m Zavore v dobrem stanju Na novo lakirano Lastna teža: 8910 kg Dovoljena skupna masa: 50.000 kg Takoj na voljo Opis: HRD Jumbo polpriklopnik, 3 osi, letnik 2012. Po navedbah lastnika so zavore v dobrem stanju. Takoj na voljo. TÜV: Da EU homologacija do: 06.05.2026 Lastna teža: 8910 Skupna teža: 50000 Model: Jumbosemitrailer 3-osni = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YA9TL510050113953, lastna masa: 27.720 kg, največja dovoljena obremenitev: 70.000 kg, skupna masa: 100.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2005, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 14.200 mm, širina tovornega prostora: 3.250 mm, skupna dolžina: 23.950 mm, skupna širina: 3.250 mm, skupna višina: 1.050 mm, vzmetenje: hidravlika, barva: modra, Leto izdelave: 2005, število osi: 7, Naprodaj je nizkopodni priklopnik Faymonville. Nwjdpsx Afbvefx Aibof Število osi 2+5 = 7 Vedno vzdrževan v lastni delavnici in je v VRHUNSKEM stanju. Priklopnik je bil uporabljen izključno za prevoze v EU – baltske države, Nemčijo in okolico. Približno 1-2 krat na tri mesece. Nizkopodni priklopnik se nahaja v Latviji, 3405 Liepaja! Podrobnosti po slikah!

Stanje: rabljeno, lastna masa: 12.450 kg, največja dovoljena obremenitev: 32.550 kg, skupna masa: 45.000 kg, prva registracija: 11/2008, dolžina tovornega prostora: 9.730 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, barva: oranžna, obratovalna teža: 12.450 kg, Very well-maintained vehicle from first owner Meusburger MTS 3 - 45T Three-axle low-bed trailer with drive-over loading ramps Nwsdpfxswb Sh Ao Aibof Heavy-duty transport Model MTS 3 Gross vehicle weight - 45,000 kg Payload - 32,550 kg Length - 13,900 mm Width - 2,500 mm Air suspension

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension Nedpfxexxl E Hj Aibewf - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: dober (rabljeno), Leto izdelave: 1988, Nizkonakladna prikolica / polprikolica Van Hool tip H0007 leto izdelave 1988 dolžina nakladalne površine cca 8,20 m (ravna površina) Nedpfx Aisxqw Tmsbewf širina nakladalne površine cca 2,5 m Višina od tal do nakladalne površine 63 cm

Stanje: rabljeno, največja dovoljena obremenitev: 37.640 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 21 m³, Oprema: ABS, * 2-cevni zračni priklop Nwodpew Ririofx Aibof * Podpora zadaj * Spredaj podporni vitel * ABS * Dvižna os * SAF osi ----Nadgradnja: Kaessebohrer LB4E EX-1 KK Lowbed nizkopodni polpriklopnik (2350 mm/labodji vrat + 9230 mm/ploščad), višina nakladanja cca 900 mm, razširljiva do 3.160 mm, izvlečna v 12 stopnjah do 19.575 mm skupne dolžine/ BMIN 12.000, BMAX 18.000 mm, 3. in 4. os samousmerljivi, naletne rampe aluminij, jeklena/lesena tla, vpenjalni obroči, twistlock. Prodaja le pravnim osebam. PRI IZVOZU JE TREBA PLAČATI SAMO NETO CENO !!!!! VSE INFORMACIJE BREZ GARANCIJE VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte Impressum).

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2026, Razpolagamo z vso evropsko dokumentacijo! Prikolice lahko dostavimo pod pogoji FOB, EXW, CPT, CFR ali CIF. Če ste zainteresirani, vas prosimo, da nas kontaktirate. Njdpfx Ajqx Nfgoibewf

Stanje: novo, Leto izdelave: 2025, GVN prikolica s 3 osmi nizkopodnožna Za več informacij nas kontaktirajte; Nedjq Di Uvspfx Aibswf

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2025, GVN prikolica s 3 osovine, ekskluzivni niskopodni model Nedpfxjqxbcns Aibswf Za više informacija kontaktirajte nas.

Stanje: novo, Leto izdelave: 2025, GVN prikolica s 3 osovine, standardni niskopodni model Molimo kontaktirajte nas za više informacija. Nwjdpfx Aieqxa Szebsf