Polpriklopnik z nizkim nakladalnikom

Faymonville MAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.

Gooseneck:
- Gooseneck hydraulically lift/lowerable as well as detachable
- Length approx. 3,650 mm
- Extensive lashing positions
- For tractor units: 6 x 4 or 8 x 4

3-Axle Compact Front Bogie:
- Hook mounts at front and rear
- Chassis length x chassis width approx. 3,560 mm x 2,850 mm
- Extensive lashing positions

Excavator Deck “BB-A”:
- Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and bolted lug coupling at the rear
- Length x base width approx. 7,150 mm x 2,850 mm
- Beam height x beam width approx. 430 mm x 1,350 mm
- Loading height 580 mm with 150 mm ground clearance
- 5 pairs of hanging lashing rings (LC 10,600 daN)
- 4 pairs of threaded blocks M30 on inner beam for mounting screw-on rings

5-Axle Rear Bogie:
- Mechanical bolt-on lug coupling for fitting a lowbed front, rear end traverse
- Chassis length x chassis width approx. 6,840 mm x 2,850 mm
- Extensive lashing positions

Pendulum Axle and Tyres (front and rear bogie):
- “PENDEL-AXLE”, all axles hydromechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pre-plugs for securing in lifted position
- Final paint of axles with 2 coats of 2K paint, single-colour in MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tyres 285/70 R19.5

Steering Override:
- Remote steering from the front and rear via cable remote control with push buttons, including axle tracking control
- Socket for steering control operation on the gooseneck
- Cable remote control with push buttons including axle tracking control

Included accessories:
- Yellow-red air couplings on galvanised front connection rail
- Steel headboard approx. 400 mm high
- 4 wheel chocks with holders
- 2 spare wheels 285/70 R19.5
- 3.5" kingpin
- Gantry with winch for spare wheel at the front side of the gooseneck
- Truck hydraulic connection with flow control valve (40 l/min), including gantry for suspension of supply lines, tractor unit tank must be at least 80 litres with couplings
- White reflective tape according to EU regulations on sides and extension, red at rear
- Plug-in ALU side panels and rear wall on gooseneck, approx. 400 mm high, anodised
- Operating lever on gooseneck protected by folding cover
- Separate air connection with air pistol on gooseneck
- Central lubrication system BEKAMAX with standard grease NLGI-2: 1x on the gooseneck, 1x on 3-axle bogie, 1x on 5-axle bogie
- Variomax tool kit
Bjdpfxowhywfe Agtowu
- Multi-coupling hydraulic connections in the lowbed hook area
- Front bogie with separate air connection for air screwdriver
- Threaded inserts (ø 40 mm) every approx. 500 mm on outside of upper flange of excavator deck for screw rings
- Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm
- Steel mats with rubber covering approx. 12 mm thick
- Two INOX toolboxes 855 x 340 x 390 mm
- Radio remote control for steering override in addition to cable remote
- Painted sand layer as anti-slip measure
- 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.