Zamenjajte karoserijo s karoserijo škatle

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

7.82 m BDF Krone smooth-sided swap body, used (multiple units available)

The exterior of the swap body, including the roof, will be painted in the customer’s chosen color (standard RAL shade). The substructure and parts of the support legs are not painted, as these are not visible once the unit is set down.
Set-down height: 1120 mm
The swap body is watertight, and the roller shutter operates smoothly.

External dimensions (approx. in mm):
Length: 7820 | Width: 2550 | Height: 2925
Internal dimensions (approx. in mm):
Length: 7700 | Width: 2480 | Height: 2700

Door openings (in mm):
Width: 2370 | Height: 2600
Lashing: Keyhole system

For registration/operation max. permitted gross weight: 16,000 kg
Suitable for intermodal transport, including rail coding as per DIN EN 13044
Rail approval: Code XL (for rail transport over 120 km/h)

Floor frame:
195 mm high floor assembly including floor; longitudinal beams made of rectangular pipe with cross members and outer frame as welded construction with bottom guide tunnel
4 container corner castings on 20’ basis, symmetrical overhangs
4 gripper bar strips
Predpfx Afsvv R Ifo Nec
7 pairs of lashing rings along the side rubbing rail

Flooring:
Type: BO WST
27 mm thick, waterproof, bonded phenolic plywood floor, strength according to DIN EN 283; floor load up to max. 5,460 kg fork axle load
2 ventilation openings in the front floor section (per GGVS)

Box body:
Type: AB WST
Internal height: 2700 mm
Portal height internal: 2525 mm
Overall height: 2,925 mm
Corner height: 2,900 mm
Sealed body
Side walls made from smooth, galvanized steel cassette panels
Roof made of trapezoidal-profile steel sheet, height: 25 mm
2 ventilation slots per side wall

• Rubbing rail and side wall with cut-outs for internal forklift collision guard, 3-sided, approx. 300 mm high
• Front wall smooth, made from galvanized steel cassette panels
• Front wall inside with 21 mm phenolic panel, 750 mm high; above that, a continuous 12 mm phenolic panel
• Front wall outside, top section with offset (optimized for cornering)
• Rear wall with roller shutter (internal width: 2370 mm), DB homologation Train Plus, replaceable rollers
• Flat steel protection for roller shutter guide rail
• Interior side walls fully fitted with keyhole rail sheets
• 13 recessed steel guide rails on both left and right sides for double-deck loading beams
• 13 LM loading beams for double-deck loading
• Horizontal steel collision guard on rear profile, left & right


Attention: Actual dimensions and other specific details may vary slightly due to ongoing product improvements.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.