7.82 BDF Jumbo zamenljivo tovorišče z gladkimi stenami

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.82 BDF Krone smooth-sided swap body, used (Multiple units available) Color: White Support height: 1120 mm The swap body is watertight, and the roller shutter door operates smoothly. External dimensions (approx., mm): Length 7820, Width 2550, Height 2925 Internal dimensions (approx., mm): Length 7700, Width 2480, Height 2700 Door openings (mm): Width 2370, Height 2530 Lashing: Keyhole slotted Maximum permissible gross weight for approval/operation: 16,000 kg Intermodal suitable, incl. railway codification according to DIN EN 13044 Railway approval Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high substructure including floor; rectangular tube longitudinal beams with cross members and outer frame as a welded assembly, with bottom-mounted guide tunnel 4 container corner castings, 20' basis, symmetrical overhangs 4 grab bar strips 7 pairs of lashing rings mounted laterally in rubbing strip Floor: Type: BO WST 27 mm thick, water-resistant bonded phenolic plywood floor, strength per DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front end in the floor (per GGVS) Box structure: Construction type: AB WST Internal height: 2700 mm Portal opening height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Side walls: smooth, made of galvanized steel cassette panels Isdpfx Aevxbfmob Uetr Roof: trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilators per side wall Rubbing strip and side wall with cutouts Interior anti-collision guard for forklift, three-sided, approx. 300 mm high Front wall: smooth, galvanized steel cassette panels Interior front wall: 21 mm phenolic plywood, 750 mm high, above that a continuous 12 mm plywood panel Exterior front wall: offset at top (optimized for curving) Rear wall: roller shutter (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel anti-collision protection for roller shutter guide rails Side walls fully lined with keyhole perforated plates on the inside 13 steel guide rails recessed left and right for double-deck load beams 13 aluminum load beams for double-deck loading Horizontal steel anti-collision protection on the rear profile, left and right Note: Actual dimensions and specific details may vary slightly due to ongoing product improvements.

Stanje: rabljeno, Leto izdelave: 2000, barva: bela, skupna masa: 16.000 kg, največja dovoljena obremenitev: 13.000 kg, lastna masa: 3.000 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.530 mm, številka stroja/vozila: 2012773-1, BDF steel swap body / swap box 7.45 m with roller shutter door * Swap box / steel box with ribbed outer wall * Suitable for crane handling and stacking * Keyhole rails * Anti-slip plywood floor, suitable for forklift traffic * Upper corner fittings * Light rust on frame and body – technically sound! * Dry interior Isdsl H Ridspfx Ab Uetr We constantly have large quantities of various makes and designs for SALE or RENT in stock!!! Nationwide delivery available!

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 7.82 m BDF Krone smooth-sided swap body, used (multiple units available) The exterior of the swap body, including the roof, will be painted in the customer’s chosen color (standard RAL shade). The substructure and parts of the support legs are not painted, as these are not visible once the unit is set down. Set-down height: 1120 mm The swap body is watertight, and the roller shutter operates smoothly. External dimensions (approx. in mm): Length: 7820 | Width: 2550 | Height: 2925 Internal dimensions (approx. in mm): Length: 7700 | Width: 2480 | Height: 2700 Door openings (in mm): Width: 2370 | Height: 2600 Lashing: Keyhole system For registration/operation max. permitted gross weight: 16,000 kg Suitable for intermodal transport, including rail coding as per DIN EN 13044 Rail approval: Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high floor assembly including floor; longitudinal beams made of rectangular pipe with cross members and outer frame as welded construction with bottom guide tunnel 4 container corner castings on 20’ basis, symmetrical overhangs 4 gripper bar strips 7 pairs of lashing rings along the side rubbing rail Flooring: Type: BO WST 27 mm thick, waterproof, bonded phenolic plywood floor, strength according to DIN EN 283; floor load up to max. 5,460 kg fork axle load 2 ventilation openings in the front floor section (per GGVS) Box body: Type: AB WST Internal height: 2700 mm Portal height internal: 2525 mm Overall height: 2,925 mm Corner height: 2,900 mm Sealed body Side walls made from smooth, galvanized steel cassette panels Roof made of trapezoidal-profile steel sheet, height: 25 mm 2 ventilation slots per side wall Itsdpfx Abjvv R Ifs Uer • Rubbing rail and side wall with cut-outs for internal forklift collision guard, 3-sided, approx. 300 mm high • Front wall smooth, made from galvanized steel cassette panels • Front wall inside with 21 mm phenolic panel, 750 mm high; above that, a continuous 12 mm phenolic panel • Front wall outside, top section with offset (optimized for cornering) • Rear wall with roller shutter (internal width: 2370 mm), DB homologation Train Plus, replaceable rollers • Flat steel protection for roller shutter guide rail • Interior side walls fully fitted with keyhole rail sheets • 13 recessed steel guide rails on both left and right sides for double-deck loading beams • 13 LM loading beams for double-deck loading • Horizontal steel collision guard on rear profile, left & right Attention: Actual dimensions and other specific details may vary slightly due to ongoing product improvements.