Zamenjava ohišja telesa

Krone , Kerex, Wechselbrücke, Wechselbehälter, Koffer, BDF, MEGA, Jumbo, Rolltor, Container, Brücke, Lager, Vermietung

Stanje: novo, Leto izdelave: 2025, barva: bela, Are you looking for a fully equipped, comfortable mobile living unit for temporary accommodation? The DL730 mobile living unit is ideal for companies and organizations that require temporary housing for colleagues, staff, or groups of adults. This portable home is designed for daily comfort and efficient use at any desired location. The unit is suitable for four adults and features two separate bedrooms with bunk beds. The kitchen is fully equipped with a four-burner gas stove, oven, refrigerator with freezer compartment, and extractor hood. Additionally, the unit has a bathroom with shower, toilet, washbasin, and an electric boiler for hot water. The central living area is furnished with a table and four chairs, providing a comfortable temporary living environment. Chedpoxx Rvwsfx Akcja = Further Information = Year of construction: 2025 Model year: 2025 Unladen weight: 2,500 kg Gross vehicle weight: 2,500 kg Dimensions (L x W x H): 730 x 250 x 280 cm General condition: very good Technical condition: very good Optical condition: very good Price: on request = Company Information = Direct from the sole importer of all brands! No intermediaries, direct from the importer only. LARGE STOCK AVAILABLE, immediate delivery.

Stanje: novo, 10 ft storage container, new – Please enquire about availability via email! Specification as follows: - Exterior paint: RAL 5010 gentian blue - Cathodic dip coating (grey tone) - Forklift pockets spacing: 950 mm - Galvanised locking rods Cjdpfxef Nzxlo Akcoha - Laminated plywood flooring, 20 mm thick, coated - Container corners top and bottom - Stackable up to 3 units high - Can be handled by crane and forklift External dimensions 10 ft storage container (LxWxH): 2991 x 2438 x 2591 mm Tare weight: 825 kg, Payload: 10,000 kg Also available as 8 ft storage container, price €2,790 plus VAT. Specification as above, External dimensions 8 ft storage container (LxWxH): 2438 x 2200 x 2260 mm Tare weight: 630 kg, Payload: 3,500 kg Purchase price ex works 26810 Westoverledingen. Delivery available at additional cost. Please enquire about delivery charges via email, quoting the delivery postcode.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 28.600 kg, lastna masa: 3.800 kg, prostornina tovornega prostora: 76,4 m³, 40-Foot Storage Container; used - Wind and Watertight - Smooth-Operating Double-Leaf Doors - Wooden Flooring - With Valid CSC Plate Chsdstp Tbnjpfx Akcsa Technical Data: - External Dimensions (LxWxH): 12,192 x 2,438 x 2,896 mm - Internal Dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm - Door Dimensions: 2,343 x 2,585 mm - Volume: 76.2 m³ Container Construction: - Steel frame structure as the load-bearing element, consisting of 4 corner posts (6 mm thick) and roof/floor beams (3 to 4 mm thick) - Walls made of corrugated steel sheet, 2 mm thick - Double-leaf doors with all-round rubber seal - 4x galvanized door locking bars - 4x ventilation openings on the side walls below the roof frame - Forklift pockets integrated into the base longitudinal beams, 4 mm thick - Floor made from coated wooden panels, 28 mm thick (water-resistant, built to ISO standards) Delivery available for an additional charge. Viewing by appointment at our premises in 48465 Schüttorf at any time.

Stanje: rabljeno, Leto izdelave: 2007, skupna masa: 16.000 kg, lastna masa: 2.850 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.530 mm, dolžina zabojnika: 24 čevelj, številka stroja/vozila: 481747, BDF swap body / swap box with roller shutter door * Smooth-sided steel box Csdpfx Aeng Hb Iskcjha * Length: 7.45 m * Roller shutter – fully serviced, fully functional! * Interior equipped with keyhole panels * Lashing rings integrated into side walls * Phenolic resin-coated flooring * Neutral white WITHOUT lettering! * Paint chipping present on side walls and roller door * Light rust on frame and superstructure * Coupling height: 1.32 m * Clearance height at roller shutter: 2,370 mm Multiple units available! Nationwide delivery possible! We always have a large selection of units from various manufacturers and in different configurations—available for sale or RENT!!! All prices are net, plus statutory VAT!

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 7.82 m BDF Krone smooth-sided swap body, used (multiple units available) The exterior of the swap body, including the roof, will be painted in the customer’s chosen color (standard RAL shade). The substructure and parts of the support legs are not painted, as these are not visible once the unit is set down. Set-down height: 1120 mm The swap body is watertight, and the roller shutter operates smoothly. External dimensions (approx. in mm): Chsdpovv R Ifjfx Akcsa Length: 7820 | Width: 2550 | Height: 2925 Internal dimensions (approx. in mm): Length: 7700 | Width: 2480 | Height: 2700 Door openings (in mm): Width: 2370 | Height: 2600 Lashing: Keyhole system For registration/operation max. permitted gross weight: 16,000 kg Suitable for intermodal transport, including rail coding as per DIN EN 13044 Rail approval: Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high floor assembly including floor; longitudinal beams made of rectangular pipe with cross members and outer frame as welded construction with bottom guide tunnel 4 container corner castings on 20’ basis, symmetrical overhangs 4 gripper bar strips 7 pairs of lashing rings along the side rubbing rail Flooring: Type: BO WST 27 mm thick, waterproof, bonded phenolic plywood floor, strength according to DIN EN 283; floor load up to max. 5,460 kg fork axle load 2 ventilation openings in the front floor section (per GGVS) Box body: Type: AB WST Internal height: 2700 mm Portal height internal: 2525 mm Overall height: 2,925 mm Corner height: 2,900 mm Sealed body Side walls made from smooth, galvanized steel cassette panels Roof made of trapezoidal-profile steel sheet, height: 25 mm 2 ventilation slots per side wall • Rubbing rail and side wall with cut-outs for internal forklift collision guard, 3-sided, approx. 300 mm high • Front wall smooth, made from galvanized steel cassette panels • Front wall inside with 21 mm phenolic panel, 750 mm high; above that, a continuous 12 mm phenolic panel • Front wall outside, top section with offset (optimized for cornering) • Rear wall with roller shutter (internal width: 2370 mm), DB homologation Train Plus, replaceable rollers • Flat steel protection for roller shutter guide rail • Interior side walls fully fitted with keyhole rail sheets • 13 recessed steel guide rails on both left and right sides for double-deck loading beams • 13 LM loading beams for double-deck loading • Horizontal steel collision guard on rear profile, left & right Attention: Actual dimensions and other specific details may vary slightly due to ongoing product improvements.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.82 BDF Krone smooth-sided swap body, used (Multiple units available) Color: White Support height: 1120 mm The swap body is watertight, and the roller shutter door operates smoothly. External dimensions (approx., mm): Length 7820, Width 2550, Height 2925 Internal dimensions (approx., mm): Length 7700, Width 2480, Height 2700 Door openings (mm): Width 2370, Height 2530 Lashing: Keyhole slotted Maximum permissible gross weight for approval/operation: 16,000 kg Intermodal suitable, incl. railway codification according to DIN EN 13044 Railway approval Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high substructure including floor; rectangular tube longitudinal beams with cross members and outer frame as a welded assembly, with bottom-mounted guide tunnel 4 container corner castings, 20' basis, symmetrical overhangs 4 grab bar strips 7 pairs of lashing rings mounted laterally in rubbing strip Floor: Type: BO WST 27 mm thick, water-resistant bonded phenolic plywood floor, strength per DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front end in the floor (per GGVS) Box structure: Construction type: AB WST Internal height: 2700 mm Portal opening height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Side walls: smooth, made of galvanized steel cassette panels Roof: trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilators per side wall Rubbing strip and side wall with cutouts Interior anti-collision guard for forklift, three-sided, approx. 300 mm high Front wall: smooth, galvanized steel cassette panels Interior front wall: 21 mm phenolic plywood, 750 mm high, above that a continuous 12 mm plywood panel Exterior front wall: offset at top (optimized for curving) Rear wall: roller shutter (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel anti-collision protection for roller shutter guide rails Side walls fully lined with keyhole perforated plates on the inside 13 steel guide rails recessed left and right for double-deck load beams 13 aluminum load beams for double-deck loading Horizontal steel anti-collision protection on the rear profile, left and right Note: Actual dimensions and specific details may vary slightly due to ongoing product improvements. Chedpfxevxbfms Akcja

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, barva: bela, skupna masa: 16.000 kg, največja dovoljena obremenitev: 12.600 kg, lastna masa: 3.400 kg, 7,45 BDF Kerex Jumbo zamenljiva nadgradnja – gladka stena, rabljeno (na voljo več kosov) Zunanja barva: bela Možna parkirna višina od 1000 mm. Zamenljiva nadgradnja je vodotesna in dvižna vrata delujejo brezhibno. Zunanje mere (približno v mm): Dolžina 7450 Širina 2550 Višina 2950 Notranje mere (približno v mm): Dolžina 7289 Širina 2350 Višina 2774 Odpiranje vrat (v mm): Širina 2350 Višina 2520 Pritrditev: luknja za ključ Kapaciteta palet (v mm): Euro 800x1200 – 18 Metric 1000x1200 – 14 Gitterbox 835x1240 – 16 Chjdpsydvfiofx Akcja “Aussie” 1170x1170 – 12 Pozor: dejanske dimenzije in druge specifične podrobnosti se lahko zaradi nenehnih izboljšav izdelka rahlo razlikujejo od navedenih.

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.590 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.820 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Burgers Double Deck Trailer | 2-Axle Steered NEW More space. Lower costs. More sustainable transport. Up to 60% more loading area compared to standard semi-trailers. In many cases, replaces 3 trailers with 2 double deckers and reduces CO₂ emissions by up to 40%. Technical Data (Model: 2-Axle Steered) Chassis and Body Structure: 2-axle, steered * Axle system: TRIDEC TF-V02, mechanical steering, no electronics * Air suspension with low-maintenance bushings, lift range +160 mm / -105 mm * Axle spacing: 1,400 mm * Axle load: 2 × 9,000 kg = 18,000 kg * Permissible total weight: 30,000 kg (12,000 kg kingpin load + 18,000 kg axle load) * Tyres: 4 × Goodyear 385/65 R22.5 on steel rims * Wheelbase and axle position adjustable according to loading scheme * Wheel arches with wear blocks and anti-spray mudflaps * Fully hot-dip galvanized chassis to ZINQ standard Braking and Safety Systems: WABCO 2-line air brake system * Drum brakes 420 × 180 mm * ABS/EBS-E with ECAS (level control), ELEX and RSS (electronic stability control) * Visible control lights for ABS/EBS and ECAS Dimensions: External (L × W × H): 13,820 × 2,550 × 4,045 mm * Internal dimension upper deck: length 13,590 mm × width 2,500 mm × height 1,820 mm * Internal dimension lower deck: length 9,940 mm × width 2,500 mm × height 1,820 mm * Lower deck height from floor: 320 mm Body and Materials: * Side walls: 21 mm plywood, coated white polyester inside and out * Front wall: 24 mm plywood, double-sided white polyester * Roof: 30 mm insulated polyester panel, white, with rainwater drainage * Floors: Aluminium profile (upper and lower), anti-slip coated, grey * Stainless steel front and corner profiles, L-profiles on side flaps Access and Operation: Csdpfow I Iinox Akcsha * Three side flaps (battery compartment, lift/smartboard control, technical access) * Multi-deck lift Dhollandia DH-VH (2,500 kg lifting capacity, hydraulic folding tip, LED platform lighting, folding rails and ramps) * Lift control: External operation right side, integrated in railing * Spare wheel not included Electrics and Lighting: * LED interior lighting upper and lower deck * Full LED exterior lighting: position, marker, reversing and work lights * Additional LED for platform illumination * Power supply via 2 × 230 Ah batteries, charging via tractor unit * Main switch behind side flap, linked to lift control * WABCO Smartboard: Weight display, odometer, loading and unloading heights adjustable Finish and Paintwork: * Exterior colour: RAL 1003 Yellow (non-metallic), incl. wheel arches, stainless steel front and rear * Reflectors: 3M partial contour marking (white side, red rear) * Advertising spaces possible (optional) Benefits: * 60% more loading area — replaces up to 3 standard trailers with 2 double decks * 40% less CO₂ — environmentally friendly and economical * ROI often achievable in just 1 year * Customisable (axles, refrigeration, dimensions) * Suitable for long-haul and distribution transport Available Configurations from Burgers: * 2-Axle Standard — rigid or steered, 13.60 × 2.55 × 4.00 m * 3-Axle Standard — rigid or with steered axle * City trailer — max. 11.50 m, always steered * Special sizes — height up to 4.25 m depending on national regulations * Body: Plywood or insulated, optionally with cooling and temperature zones * Extras: tail lift, hydraulic ramp, solar modules, cameras, aerodynamic profiles, LED packages For further information, we are happy to assist you.

Stanje: rabljeno, Leto izdelave: 1999, dolžina zabojnika: 24 čevelj, skupna masa: 18.000 kg, lastna masa: 3.000 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.640 mm, številka stroja/vozila: 9115, JUMBO BDF swap body / swap box with roller shutter door --- * Corrugated steel box body * Suitable for crane handling and stacking * Length: 7.45 m * Roller shutter door * Interior with keyhole plates * Plywood (screen-printed) floor * Neutral white WITHOUT lettering! * Light rust on frame and body * Drop-off/parking height: 1.02 - 1.32 m * Loading height at roller shutter: 2.42 m * Manufacturer: YMC * UVV safety inspection available on request Chodponkadrsfx Akcja * Multiple units available! --- Nationwide delivery possible! --- We always have a large number of units from various manufacturers and configurations available for sale or RENT!!! All prices net plus statutory VAT!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.82 BDF Krone smooth-sided swap body, used (multiple units available) Exterior colour: white Coupling height: 1320 mm The swap body is watertight; the roller shutter door operates smoothly. Approximate exterior dimensions in mm: Length 7820 | Width 2550 | Height 2750 Cjdpfxswahr Is Akcjha Approximate interior dimensions in mm: Length 7650 | Width 2480 | Height 2500 Door openings in mm: Width 2370 | Height 2600 Lashing: Keyhole type Tare weight: 3000 kg Maximum payload: 13,000 kg Gross weight: 16,000 kg Please note: Actual dimensions and specific details may vary slightly from those stated above due to ongoing product improvements.