Polpriklopnik z nizkim nakladalnikom

Meusburger 3-Achs-Tele-Semi-Radmulden-hydr. Rampen

For every used semi-trailer, you receive a current and comprehensive inspection and functionality report.

Chassis:
- Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm
- Neck 200 mm with beveled front corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper)
- 2 king pin positions with replaceable 2" king pin
- Outer frame closed outwards as a hole-type external frame
- Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
- Frame in front of and behind the division with 80x80 mm step
- Reinforced frame version / point load in retracted position at center of gravity
- With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle
- 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm

Ramps:
Hsdpfx Absxxl E Ho Hjfd
- 2 pieces 2-part loading ramps, special design with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit)
- Width approx. 800 mm
- Wood covering
- Incl. traction ribs on loading ramps
- Lockable in transport position with lashing straps
- Operation by control lever mounted at rear right in frame
- Laterally hydraulically adjustable

Flooring:
- 35 mm larch wood floor with aluminum omega profiles

Axles, Steering and Tyres:
- BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lift and lowering device with total lift approx. 200 mm
- 2nd driving height via ball valve +50 mm
- 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, centrally aligned offset
- 12 tyres, 245/70 R 17.5 143/141J, tubeless
- Incl. tyre pressure monitoring

Accessories:
- Plug-in side and rear boards on the gooseneck, approx. 400 mm high
- Spare wheel carrier
- Lateral aluminum underrun protection
- 4 wheel chocks with holders
- Long license plate holder on end cross member
- 1 ECE sign insertable at rear
- 11 pairs of 10t lashing modules on the side:
- 2x on the gooseneck
- 2x on the deck before extension
- 7x after extension
- Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm
- 4 mountings for warning signs to be inserted into stake pockets on the deck
- 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm
- 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions)
- 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle)
- 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.